[PATCH AUTOSEL 4.14 002/127] scsi: aacraid: fix illegal IO beyond last LBA

[PATCH AUTOSEL 4.14 002/127] scsi: aacraid: fix illegal IO beyond last LBA

[Sasha Levin]

From: Balsundar P <balsundar.p@microsemi.com>

[ Upstream commit c86fbe484c10b2cd1e770770db2d6b2c88801c1d ]

The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic

Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aacraid/aachba.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 7173ae53c5260..ba11313568810 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2322,13 +2322,13 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
@@ -2414,13 +2414,13 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
-- 
2.25.1

[PATCH AUTOSEL 4.14 009/127] scsi: fnic: fix use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit ec990306f77fd4c58c3b27cc3b3c53032d6e6670 ]

The memory chunk io_req is released by mempool_free. Accessing
io_req->start_time will result in a use after free bug. The variable
start_time is a backup of the timestamp. So, use start_time here to
avoid use after free.

Link: https://lore.kernel.org/r/1572881182-37664-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/fnic/fnic_scsi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index d79ac0b24f5af..04c25ca2be45f 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1034,7 +1034,8 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
 		atomic64_inc(&fnic_stats->io_stats.io_completions);
 
 
-	io_duration_time = jiffies_to_msecs(jiffies) - jiffies_to_msecs(io_req->start_time);
+	io_duration_time = jiffies_to_msecs(jiffies) -
+						jiffies_to_msecs(start_time);
 
 	if(io_duration_time <= 10)
 		atomic64_inc(&fnic_stats->io_stats.io_btw_0_to_10_msec);
-- 
2.25.1

[PATCH AUTOSEL 4.14 045/127] scsi: lpfc: Fix RQ buffer leakage when no IOCBs available

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 39c4f1a965a9244c3ba60695e8ff8da065ec6ac4 ]

The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:

 Port Status Event: ... error 1=0x52004a01, error 2=0x218

The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.

When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.

Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.

[mkp: typo]

Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 480d2d467f7a6..45445dafc80cf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -17038,6 +17038,10 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 			list_add_tail(&iocbq->list, &first_iocbq->list);
 		}
 	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
 	return first_iocbq;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 046/127] scsi: lpfc: Fix coverity errors in fmdi attribute handling

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 4cb9e1ddaa145be9ed67b6a7de98ca705a43f998 ]

Coverity reported a memory corruption error for the fdmi attributes
routines:

  CID 15768 [Memory Corruption] Out-of-bounds access on FDMI

Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and
lpfc_fdmi_reg_port_list structures, a field was placed at the start of
payload that may have variable content. The field was given an arbitrary
type (uint32_t). The code then uses the field name to derive an address,
which it used in things such as memset and memcpy. The memset sizes or
memcpy lengths were larger than the arbitrary type, thus coverity reported
an error.

Fix by replacing the arbitrary fields with the real field structures
describing the payload.

Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_ct.c | 137 ++++++++++++++++++------------------
 drivers/scsi/lpfc/lpfc_hw.h |  36 +++++-----
 2 files changed, 85 insertions(+), 88 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 601a4ee60de85..e193fa5963d82 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1714,8 +1714,8 @@ lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -1731,8 +1731,8 @@ lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* This string MUST be consistent with other FC platforms
 	 * supported by Broadcom.
@@ -1756,8 +1756,8 @@ lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->SerialNumber,
 		sizeof(ae->un.AttrString));
@@ -1778,8 +1778,8 @@ lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -1799,8 +1799,8 @@ lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelDesc,
 		sizeof(ae->un.AttrString));
@@ -1822,8 +1822,8 @@ lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t i, j, incr, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* Convert JEDEC ID to ascii for hardware version */
 	incr = vp->rev.biuRev;
@@ -1852,8 +1852,8 @@ lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, lpfc_release_version,
 		sizeof(ae->un.AttrString));
@@ -1874,8 +1874,8 @@ lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
@@ -1899,8 +1899,8 @@ lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -1919,8 +1919,8 @@ lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s %s %s",
 		 init_utsname()->sysname,
@@ -1942,7 +1942,7 @@ lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt =  cpu_to_be32(LPFC_MAX_CT_SIZE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -1958,8 +1958,8 @@ lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_node_name(vport,
 				ae->un.AttrString, 256);
@@ -1977,7 +1977,7 @@ lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Nothing is defined for this currently */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -1994,7 +1994,7 @@ lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Each driver instance corresponds to a single port */
 	ae->un.AttrInt =  cpu_to_be32(1);
@@ -2011,8 +2011,8 @@ lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_nodename,
 	       sizeof(struct lpfc_name));
@@ -2030,8 +2030,8 @@ lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -2050,7 +2050,7 @@ lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Driver doesn't have access to this information */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -2067,8 +2067,8 @@ lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "EMULEX",
 		sizeof(ae->un.AttrString));
@@ -2089,8 +2089,8 @@ lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
@@ -2111,7 +2111,7 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt = 0;
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
@@ -2161,7 +2161,7 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
 		switch (phba->fc_linkspeed) {
@@ -2225,7 +2225,7 @@ lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	hsp = (struct serv_parm *)&vport->fc_sparam;
 	ae->un.AttrInt = (((uint32_t) hsp->cmn.bbRcvSizeMsb) << 8) |
@@ -2245,8 +2245,8 @@ lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString),
 		 "/sys/class/scsi_host/host%d", shost->host_no);
@@ -2266,8 +2266,8 @@ lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s",
 		 init_utsname()->nodename);
@@ -2287,8 +2287,8 @@ lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2305,8 +2305,8 @@ lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.portName,
 	       sizeof(struct lpfc_name));
@@ -2323,8 +2323,8 @@ lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_port_name(vport, ae->un.AttrString, 256);
 	len += (len & 3) ? (4 - (len & 3)) : 4;
@@ -2342,7 +2342,7 @@ lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP)
 		ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTTYPE_NLPORT);
 	else
@@ -2360,7 +2360,7 @@ lpfc_fdmi_port_attr_class(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt = cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2375,8 +2375,8 @@ lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_portname,
 	       sizeof(struct lpfc_name));
@@ -2393,8 +2393,8 @@ lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
@@ -2414,7 +2414,7 @@ lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	/* Link Up - operational */
 	ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTSTATE_ONLINE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2430,7 +2430,7 @@ lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	vport->fdmi_num_disc = lpfc_find_map_node(vport);
 	ae->un.AttrInt = cpu_to_be32(vport->fdmi_num_disc);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2446,7 +2446,7 @@ lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(vport->fc_myDID);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2461,8 +2461,8 @@ lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Initiator",
 		sizeof(ae->un.AttrString));
@@ -2482,8 +2482,8 @@ lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrString, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2503,8 +2503,8 @@ lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Version 2.0",
 		sizeof(ae->un.AttrString));
@@ -2525,8 +2525,8 @@ lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -2545,7 +2545,7 @@ lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* SRIOV (type 3) is not supported */
 	if (vport->vpi)
@@ -2565,7 +2565,7 @@ lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(0);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2580,7 +2580,7 @@ lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(1);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2728,7 +2728,8 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Registered Port List */
 			/* One entry (port) per adapter */
 			rh->rpl.EntryCnt = cpu_to_be32(1);
-			memcpy(&rh->rpl.pe, &phba->pport->fc_sparam.portName,
+			memcpy(&rh->rpl.pe.PortName,
+			       &phba->pport->fc_sparam.portName,
 			       sizeof(struct lpfc_name));
 
 			/* point to the HBA attribute block */
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index bdc1f184f67a3..12e033bbe607a 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1326,25 +1326,8 @@ struct fc_rdp_res_frame {
 /* lpfc_sli_ct_request defines the CT_IU preamble for FDMI commands */
 #define  SLI_CT_FDMI_Subtypes     0x10	/* Management Service Subtype */
 
-/*
- * Registered Port List Format
- */
-struct lpfc_fdmi_reg_port_list {
-	uint32_t EntryCnt;
-	uint32_t pe;		/* Variable-length array */
-};
-
-
 /* Definitions for HBA / Port attribute entries */
 
-struct lpfc_fdmi_attr_def { /* Defined in TLV format */
-	/* Structure is in Big Endian format */
-	uint32_t AttrType:16;
-	uint32_t AttrLen:16;
-	uint32_t AttrValue;  /* Marks start of Value (ATTRIBUTE_ENTRY) */
-};
-
-
 /* Attribute Entry */
 struct lpfc_fdmi_attr_entry {
 	union {
@@ -1355,7 +1338,13 @@ struct lpfc_fdmi_attr_entry {
 	} un;
 };
 
-#define LPFC_FDMI_MAX_AE_SIZE	sizeof(struct lpfc_fdmi_attr_entry)
+struct lpfc_fdmi_attr_def { /* Defined in TLV format */
+	/* Structure is in Big Endian format */
+	uint32_t AttrType:16;
+	uint32_t AttrLen:16;
+	/* Marks start of Value (ATTRIBUTE_ENTRY) */
+	struct lpfc_fdmi_attr_entry AttrValue;
+} __packed;
 
 /*
  * HBA Attribute Block
@@ -1379,13 +1368,20 @@ struct lpfc_fdmi_hba_ident {
 	struct lpfc_name PortName;
 };
 
+/*
+ * Registered Port List Format
+ */
+struct lpfc_fdmi_reg_port_list {
+	uint32_t EntryCnt;
+	struct lpfc_fdmi_port_entry pe;
+} __packed;
+
 /*
  * Register HBA(RHBA)
  */
 struct lpfc_fdmi_reg_hba {
 	struct lpfc_fdmi_hba_ident hi;
-	struct lpfc_fdmi_reg_port_list rpl;	/* variable-length array */
-/* struct lpfc_fdmi_attr_block   ab; */
+	struct lpfc_fdmi_reg_port_list rpl;
 };
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.14 062/127] scsi: aacraid: Disabling TM path and only processing IOP reset

[Sasha Levin]

From: Sagar Biradar <Sagar.Biradar@microchip.com>

[ Upstream commit bef18d308a2215eff8c3411a23d7f34604ce56c3 ]

Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags.  Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.

Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com
Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aacraid/commsup.c |  2 +-
 drivers/scsi/aacraid/linit.c   | 34 +++++++++++++++++++++++++---------
 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index a284527999c55..65a5cd6a5f961 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -771,7 +771,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
 		fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
-	} else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
+	} else
 		return -EINVAL;
 
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 053a31c5485f3..e0e728d0dd5e7 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -736,7 +736,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
 		status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
 				  (fib_callback) aac_hba_callback,
 				  (void *) cmd);
-
+		if (status != -EINPROGRESS) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			return ret;
+		}
 		/* Wait up to 15 secs for completion */
 		for (count = 0; count < 15; ++count) {
 			if (cmd->SCp.sent_command) {
@@ -915,11 +919,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host device reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -934,7 +938,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 	status = aac_hba_send(command, fib,
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
-
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state == 0) {
@@ -973,11 +982,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host target reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -994,6 +1003,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
 
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
+
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state <= 0) {
@@ -1046,7 +1062,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 		}
 	}
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+	pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
 
 	/*
 	 * Check the health of the controller
-- 
2.25.1

[PATCH AUTOSEL 4.14 085/127] scsi: qedi: Fix termination timeouts in session logout

[Sasha Levin]

From: Nilesh Javali <njavali@marvell.com>

[ Upstream commit b9b97e6903032ec56e6dcbe137a9819b74a17fea ]

The destroy connection ramrod timed out during session logout.  Fix the
wait delay for graceful vs abortive termination as per the FW requirements.

Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_iscsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index fb6439bc1d9a9..4d7971c3f339b 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -1072,6 +1072,9 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 		break;
 	}
 
+	if (!abrt_conn)
+		wait_delay += qedi->pf_params.iscsi_pf_params.two_msl_timer;
+
 	qedi_ep->state = EP_STATE_DISCONN_START;
 	ret = qedi_ops->destroy_conn(qedi->cdev, qedi_ep->handle, abrt_conn);
 	if (ret) {
-- 
2.25.1

[PATCH AUTOSEL 4.14 123/127] scsi: libfc: Handling of extra kref

[Sasha Levin]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit 71f2bf85e90d938d4a9ef9dd9bfa8d9b0b6a03f7 ]

Handling of extra kref which is done by lookup table in case rdata is
already present in list.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

  unreferenced object 0xffff8888259e8780 (size 512):
    comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
    hex dump (first 32 bytes):
    58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
    01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
	[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
	[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
	[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
	[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
	[<00000000e0eb6893>] process_one_work+0x382/0x6c0
	[<000000002dfd9e21>] worker_thread+0x57/0x5c0
	[<00000000b648204f>] kthread+0x1a0/0x1c0
	[<0000000072f5ab20>] ret_from_fork+0x35/0x40
	[<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak. Here we get the
nested "Received PLOGI request" for same port and this request leads to
call the fc_rport_create() twice for the same rport.

	kernel: host1: rport fffce5: Received PLOGI request
	kernel: host1: rport fffce5: Received PLOGI in INIT state
	kernel: host1: rport fffce5: Port is Ready
	kernel: host1: rport fffce5: Received PRLI request while in state Ready
	kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
	kernel: host1: rport fffce5: Received LOGO request while in state Ready
	kernel: host1: rport fffce5: Delete port
	kernel: host1: rport fffce5: Received PLOGI request
	kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy

Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 0e964ce75406b..a9137f64befa0 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -145,8 +145,10 @@ struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
 	size_t rport_priv_size = sizeof(*rdata);
 
 	rdata = fc_rport_lookup(lport, port_id);
-	if (rdata)
+	if (rdata) {
+		kref_put(&rdata->kref, fc_rport_destroy);
 		return rdata;
+	}
 
 	if (lport->rport_priv_size > 0)
 		rport_priv_size = lport->rport_priv_size;
-- 
2.25.1

[PATCH AUTOSEL 4.14 124/127] scsi: libfc: Skip additional kref updating work event

[Sasha Levin]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit 823a65409c8990f64c5693af98ce0e7819975cba ]

When an rport event (RPORT_EV_READY) is updated without work being queued,
avoid taking an additional reference.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

  unreferenced object 0xffff8888259e8780 (size 512):
  comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)
    hex dump (first 32 bytes):
	58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
	01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
  [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
  [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
  [<00000000e0eb6893>] process_one_work+0x382/0x6c0
  [<000000002dfd9e21>] worker_thread+0x57/0x5c0
  [<00000000b648204f>] kthread+0x1a0/0x1c0
  [<0000000072f5ab20>] ret_from_fork+0x35/0x40
  [<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak.  Here we get the
RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the
event RPORT_EV_READY by event RPORT_EV_STOP.  Because of this, kref_count
gets incremented by 1.

  kernel: host0: rport fffce5: Received PLOGI request
  kernel: host0: rport fffce5: Received PLOGI in INIT state
  kernel: host0: rport fffce5: Port is Ready
  kernel: host0: rport fffce5: Received PRLI request while in state Ready
  kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
  kernel: host0: rport fffce5: Received LOGO request while in state Ready
  kernel: host0: rport fffce5: Delete port
  kernel: host0: rport fffce5: Received PLOGI request
  kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
  kernel: host0: rport fffce5: work event 3
  kernel: host0: rport fffce5: lld callback ev 3
  kernel: host0: rport fffce5: work delete

Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index a9137f64befa0..669cf3553a77d 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -495,10 +495,11 @@ static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
 
 	fc_rport_state_enter(rdata, RPORT_ST_DELETE);
 
-	kref_get(&rdata->kref);
-	if (rdata->event == RPORT_EV_NONE &&
-	    !queue_work(rport_event_queue, &rdata->event_work))
-		kref_put(&rdata->kref, fc_rport_destroy);
+	if (rdata->event == RPORT_EV_NONE) {
+		kref_get(&rdata->kref);
+		if (!queue_work(rport_event_queue, &rdata->event_work))
+			kref_put(&rdata->kref, fc_rport_destroy);
+	}
 
 	rdata->event = event;
 }
-- 
2.25.1