[PATCH AUTOSEL 4.19 03/15] scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback

[PATCH AUTOSEL 4.19 03/15] scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback

[Sasha Levin]

From: Can Guo <cang@codeaurora.org>

[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ]

Users can initiate resets to specific SCSI device/target/host through
IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host
_reset_handler() callbacks is initialized with a request whose tag is -1.
In this case it is not right for eh_device_reset_handler() callback to
count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI
device associated with the SCSI cmd.

Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 40f478c4d118f..b18430efb00fb 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5772,19 +5772,16 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *host;
 	struct ufs_hba *hba;
-	unsigned int tag;
 	u32 pos;
 	int err;
-	u8 resp = 0xF;
-	struct ufshcd_lrb *lrbp;
+	u8 resp = 0xF, lun;
 	unsigned long flags;
 
 	host = cmd->device->host;
 	hba = shost_priv(host);
-	tag = cmd->request->tag;
 
-	lrbp = &hba->lrb[tag];
-	err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp);
+	lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
+	err = ufshcd_issue_tm_cmd(hba, lun, 0, UFS_LOGICAL_RESET, &resp);
 	if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
 		if (!err)
 			err = resp;
@@ -5793,7 +5790,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 
 	/* clear the commands that were pending for corresponding LUN */
 	for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) {
-		if (hba->lrb[pos].lun == lrbp->lun) {
+		if (hba->lrb[pos].lun == lun) {
 			err = ufshcd_clear_cmd(hba, pos);
 			if (err)
 				break;
-- 
2.27.0

[PATCH AUTOSEL 4.19 04/15] scsi: qedi: Correct max length of CHAP secret

[Sasha Levin]

From: Nilesh Javali <njavali@marvell.com>

[ Upstream commit d50c7986fbf0e2167279e110a2ed5bd8e811c660 ]

The CHAP secret displayed garbage characters causing iSCSI login
authentication failure. Correct the CHAP password max length.

Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index eaa50328de90c..e201c163ea1c8 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -2129,7 +2129,7 @@ qedi_show_boot_tgt_info(struct qedi_ctx *qedi, int type,
 			     chap_name);
 		break;
 	case ISCSI_BOOT_TGT_CHAP_SECRET:
-		rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+		rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN,
 			     chap_secret);
 		break;
 	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
@@ -2137,7 +2137,7 @@ qedi_show_boot_tgt_info(struct qedi_ctx *qedi, int type,
 			     mchap_name);
 		break;
 	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
-		rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+		rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN,
 			     mchap_secret);
 		break;
 	case ISCSI_BOOT_TGT_FLAGS:
-- 
2.27.0