[PATCH v3 0/3] Fix some racing problems btw err_handler and paths like system PM ops and the task abort callback

[PATCH v3 0/3] Fix some racing problems btw err_handler and paths like system PM ops and the task abort callback

[Can Guo]

This series mainly fixes racing problems btw err_handler and paths like
system PM ops, async scan and task abort callback. 

This series has been tested with error/fault injections to system PM
operations, async scan and task abort to the UFS device W-LU.

Change since v2:
- Added one more minor change into this series.

Change since v1:
- Removed Change-Id from commit msg

Can Guo (3):
  scsi: ufs: Serialize eh_work with system PM events and async scan
  scsi: ufs: Fix a racing problem between ufshcd_abort and eh_work
  scsi: ufs: Print host regs in IRQ handler when AH8 error happens

 drivers/scsi/ufs/ufshcd.c | 122 ++++++++++++++++++++++++++++++++--------------
 drivers/scsi/ufs/ufshcd.h |   3 ++
 2 files changed, 88 insertions(+), 37 deletions(-)

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v3 1/3] scsi: ufs: Serialize eh_work with system PM events and async scan

[Can Guo]

Serialize eh_work with system PM events and async scan to make sure eh_work
does not run in parallel with them.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 64 +++++++++++++++++++++++++++++------------------
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 41 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 1d8134e..7e764e8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5597,7 +5597,9 @@ static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba)
 static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 {
 	pm_runtime_get_sync(hba->dev);
-	if (pm_runtime_suspended(hba->dev)) {
+	if (pm_runtime_status_suspended(hba->dev) || hba->is_sys_suspended) {
+		enum ufs_pm_op pm_op;
+
 		/*
 		 * Don't assume anything of pm_runtime_get_sync(), if
 		 * resume fails, irq and clocks can be OFF, and powers
@@ -5612,7 +5614,8 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
 		if (!ufshcd_is_clkgating_allowed(hba))
 			ufshcd_setup_clocks(hba, true);
 		ufshcd_release(hba);
-		ufshcd_vops_resume(hba, UFS_RUNTIME_PM);
+		pm_op = hba->is_sys_suspended ? UFS_RUNTIME_PM : UFS_SYSTEM_PM;
+		ufshcd_vops_resume(hba, pm_op);
 	} else {
 		ufshcd_hold(hba, false);
 		if (hba->clk_scaling.is_allowed) {
@@ -5633,7 +5636,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
 
 static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
 {
-	return (hba->ufshcd_state == UFSHCD_STATE_ERROR ||
+	return (!hba->is_powered || hba->ufshcd_state == UFSHCD_STATE_ERROR ||
 		(!(hba->saved_err || hba->saved_uic_err || hba->force_reset ||
 			ufshcd_is_link_broken(hba))));
 }
@@ -5646,6 +5649,7 @@ static void ufshcd_recover_pm_error(struct ufs_hba *hba)
 	struct request_queue *q;
 	int ret;
 
+	hba->is_sys_suspended = false;
 	/*
 	 * Set RPM status of hba device to RPM_ACTIVE,
 	 * this also clears its runtime error.
@@ -5704,11 +5708,13 @@ static void ufshcd_err_handler(struct work_struct *work)
 
 	hba = container_of(work, struct ufs_hba, eh_work);
 
+	down(&hba->eh_sem);
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (ufshcd_err_handling_should_stop(hba)) {
 		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
 			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
 		spin_unlock_irqrestore(hba->host->host_lock, flags);
+		up(&hba->eh_sem);
 		return;
 	}
 	ufshcd_set_eh_in_progress(hba);
@@ -5716,20 +5722,18 @@ static void ufshcd_err_handler(struct work_struct *work)
 	ufshcd_err_handling_prepare(hba);
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	ufshcd_scsi_block_requests(hba);
-	/*
-	 * A full reset and restore might have happened after preparation
-	 * is finished, double check whether we should stop.
-	 */
-	if (ufshcd_err_handling_should_stop(hba)) {
-		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
-			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
-		goto out;
-	}
 	hba->ufshcd_state = UFSHCD_STATE_RESET;
 
 	/* Complete requests that have door-bell cleared by h/w */
 	ufshcd_complete_requests(hba);
 
+	/*
+	 * A full reset and restore might have happened after preparation
+	 * is finished, double check whether we should stop.
+	 */
+	if (ufshcd_err_handling_should_stop(hba))
+		goto skip_err_handling;
+
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
 		bool ret;
 
@@ -5737,17 +5741,10 @@ static void ufshcd_err_handler(struct work_struct *work)
 		/* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */
 		ret = ufshcd_quirk_dl_nac_errors(hba);
 		spin_lock_irqsave(hba->host->host_lock, flags);
-		if (!ret && !hba->force_reset && ufshcd_is_link_active(hba))
+		if (!ret && ufshcd_err_handling_should_stop(hba))
 			goto skip_err_handling;
 	}
 
-	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
-	    ufshcd_is_saved_err_fatal(hba) ||
-	    ((hba->saved_err & UIC_ERROR) &&
-	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
-				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR))))
-		needs_reset = true;
-
 	if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
 	    (hba->saved_uic_err &&
 	     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
@@ -5767,8 +5764,14 @@ static void ufshcd_err_handler(struct work_struct *work)
 	 * transfers forcefully because they will get cleared during
 	 * host reset and restore
 	 */
-	if (needs_reset)
+	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
+	    ufshcd_is_saved_err_fatal(hba) ||
+	    ((hba->saved_err & UIC_ERROR) &&
+	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
+				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))) {
+		needs_reset = true;
 		goto do_reset;
+	}
 
 	/*
 	 * If LINERESET was caught, UFS might have been put to PWM mode,
@@ -5876,12 +5879,11 @@ static void ufshcd_err_handler(struct work_struct *work)
 			dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x",
 			    __func__, hba->saved_err, hba->saved_uic_err);
 	}
-
-out:
 	ufshcd_clear_eh_in_progress(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	ufshcd_scsi_unblock_requests(hba);
 	ufshcd_err_handling_unprepare(hba);
+	up(&hba->eh_sem);
 }
 
 /**
@@ -6856,6 +6858,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
 	 */
 	scsi_report_bus_reset(hba->host, 0);
 	if (err) {
+		hba->ufshcd_state = UFSHCD_STATE_ERROR;
 		hba->saved_err |= saved_err;
 		hba->saved_uic_err |= saved_uic_err;
 	}
@@ -7704,8 +7707,10 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	struct ufs_hba *hba = (struct ufs_hba *)data;
 	int ret;
 
+	down(&hba->eh_sem);
 	/* Initialize hba, detect and initialize UFS device */
 	ret = ufshcd_probe_hba(hba, true);
+	up(&hba->eh_sem);
 	if (ret)
 		goto out;
 
@@ -8718,6 +8723,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
 	int ret = 0;
 	ktime_t start = ktime_get();
 
+	down(&hba->eh_sem);
 	if (!hba || !hba->is_powered)
 		return 0;
 
@@ -8748,6 +8754,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
 		hba->curr_dev_pwr_mode, hba->uic_link_state);
 	if (!ret)
 		hba->is_sys_suspended = true;
+	else
+		up(&hba->eh_sem);
 	return ret;
 }
 EXPORT_SYMBOL(ufshcd_system_suspend);
@@ -8764,8 +8772,10 @@ int ufshcd_system_resume(struct ufs_hba *hba)
 	int ret = 0;
 	ktime_t start = ktime_get();
 
-	if (!hba)
+	if (!hba) {
+		up(&hba->eh_sem);
 		return -EINVAL;
+	}
 
 	if (!hba->is_powered || pm_runtime_suspended(hba->dev))
 		/*
@@ -8781,6 +8791,7 @@ int ufshcd_system_resume(struct ufs_hba *hba)
 		hba->curr_dev_pwr_mode, hba->uic_link_state);
 	if (!ret)
 		hba->is_sys_suspended = false;
+	up(&hba->eh_sem);
 	return ret;
 }
 EXPORT_SYMBOL(ufshcd_system_resume);
@@ -8872,6 +8883,7 @@ int ufshcd_shutdown(struct ufs_hba *hba)
 {
 	int ret = 0;
 
+	down(&hba->eh_sem);
 	if (!hba->is_powered)
 		goto out;
 
@@ -8888,6 +8900,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
 out:
 	if (ret)
 		dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
+	hba->is_powered = false;
+	up(&hba->eh_sem);
 	/* allow force shutdown even in case of errors */
 	return 0;
 }
@@ -9082,6 +9096,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	INIT_WORK(&hba->eh_work, ufshcd_err_handler);
 	INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler);
 
+	sema_init(&hba->eh_sem, 1);
+
 	/* Initialize UIC command mutex */
 	mutex_init(&hba->uic_cmd_mutex);
 
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 47eb143..1e680bf 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -728,6 +728,7 @@ struct ufs_hba {
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
 	bool is_powered;
+	struct semaphore eh_sem;
 
 	/* Work Queues */
 	struct workqueue_struct *eh_wq;
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v3 1/3] scsi: ufs: Serialize eh_work with system PM events and async scan

[hongwus]

On 2020-11-17 15:04, Can Guo wrote:
> Serialize eh_work with system PM events and async scan to make sure 
> eh_work
> does not run in parallel with them.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---
>  drivers/scsi/ufs/ufshcd.c | 64 
> +++++++++++++++++++++++++++++------------------
>  drivers/scsi/ufs/ufshcd.h |  1 +
>  2 files changed, 41 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 1d8134e..7e764e8 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -5597,7 +5597,9 @@ static inline void
> ufshcd_schedule_eh_work(struct ufs_hba *hba)
>  static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
>  {
>  	pm_runtime_get_sync(hba->dev);
> -	if (pm_runtime_suspended(hba->dev)) {
> +	if (pm_runtime_status_suspended(hba->dev) || hba->is_sys_suspended) {
> +		enum ufs_pm_op pm_op;
> +
>  		/*
>  		 * Don't assume anything of pm_runtime_get_sync(), if
>  		 * resume fails, irq and clocks can be OFF, and powers
> @@ -5612,7 +5614,8 @@ static void ufshcd_err_handling_prepare(struct
> ufs_hba *hba)
>  		if (!ufshcd_is_clkgating_allowed(hba))
>  			ufshcd_setup_clocks(hba, true);
>  		ufshcd_release(hba);
> -		ufshcd_vops_resume(hba, UFS_RUNTIME_PM);
> +		pm_op = hba->is_sys_suspended ? UFS_RUNTIME_PM : UFS_SYSTEM_PM;
> +		ufshcd_vops_resume(hba, pm_op);
>  	} else {
>  		ufshcd_hold(hba, false);
>  		if (hba->clk_scaling.is_allowed) {
> @@ -5633,7 +5636,7 @@ static void ufshcd_err_handling_unprepare(struct
> ufs_hba *hba)
> 
>  static inline bool ufshcd_err_handling_should_stop(struct ufs_hba 
> *hba)
>  {
> -	return (hba->ufshcd_state == UFSHCD_STATE_ERROR ||
> +	return (!hba->is_powered || hba->ufshcd_state == UFSHCD_STATE_ERROR 
> ||
>  		(!(hba->saved_err || hba->saved_uic_err || hba->force_reset ||
>  			ufshcd_is_link_broken(hba))));
>  }
> @@ -5646,6 +5649,7 @@ static void ufshcd_recover_pm_error(struct 
> ufs_hba *hba)
>  	struct request_queue *q;
>  	int ret;
> 
> +	hba->is_sys_suspended = false;
>  	/*
>  	 * Set RPM status of hba device to RPM_ACTIVE,
>  	 * this also clears its runtime error.
> @@ -5704,11 +5708,13 @@ static void ufshcd_err_handler(struct 
> work_struct *work)
> 
>  	hba = container_of(work, struct ufs_hba, eh_work);
> 
> +	down(&hba->eh_sem);
>  	spin_lock_irqsave(hba->host->host_lock, flags);
>  	if (ufshcd_err_handling_should_stop(hba)) {
>  		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
>  			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
>  		spin_unlock_irqrestore(hba->host->host_lock, flags);
> +		up(&hba->eh_sem);
>  		return;
>  	}
>  	ufshcd_set_eh_in_progress(hba);
> @@ -5716,20 +5722,18 @@ static void ufshcd_err_handler(struct 
> work_struct *work)
>  	ufshcd_err_handling_prepare(hba);
>  	spin_lock_irqsave(hba->host->host_lock, flags);
>  	ufshcd_scsi_block_requests(hba);
> -	/*
> -	 * A full reset and restore might have happened after preparation
> -	 * is finished, double check whether we should stop.
> -	 */
> -	if (ufshcd_err_handling_should_stop(hba)) {
> -		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
> -			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
> -		goto out;
> -	}
>  	hba->ufshcd_state = UFSHCD_STATE_RESET;
> 
>  	/* Complete requests that have door-bell cleared by h/w */
>  	ufshcd_complete_requests(hba);
> 
> +	/*
> +	 * A full reset and restore might have happened after preparation
> +	 * is finished, double check whether we should stop.
> +	 */
> +	if (ufshcd_err_handling_should_stop(hba))
> +		goto skip_err_handling;
> +
>  	if (hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
>  		bool ret;
> 
> @@ -5737,17 +5741,10 @@ static void ufshcd_err_handler(struct 
> work_struct *work)
>  		/* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */
>  		ret = ufshcd_quirk_dl_nac_errors(hba);
>  		spin_lock_irqsave(hba->host->host_lock, flags);
> -		if (!ret && !hba->force_reset && ufshcd_is_link_active(hba))
> +		if (!ret && ufshcd_err_handling_should_stop(hba))
>  			goto skip_err_handling;
>  	}
> 
> -	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
> -	    ufshcd_is_saved_err_fatal(hba) ||
> -	    ((hba->saved_err & UIC_ERROR) &&
> -	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
> -				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR))))
> -		needs_reset = true;
> -
>  	if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) 
> ||
>  	    (hba->saved_uic_err &&
>  	     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
> @@ -5767,8 +5764,14 @@ static void ufshcd_err_handler(struct 
> work_struct *work)
>  	 * transfers forcefully because they will get cleared during
>  	 * host reset and restore
>  	 */
> -	if (needs_reset)
> +	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
> +	    ufshcd_is_saved_err_fatal(hba) ||
> +	    ((hba->saved_err & UIC_ERROR) &&
> +	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
> +				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))) {
> +		needs_reset = true;
>  		goto do_reset;
> +	}
> 
>  	/*
>  	 * If LINERESET was caught, UFS might have been put to PWM mode,
> @@ -5876,12 +5879,11 @@ static void ufshcd_err_handler(struct 
> work_struct *work)
>  			dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x 
> saved_uic_err 0x%x",
>  			    __func__, hba->saved_err, hba->saved_uic_err);
>  	}
> -
> -out:
>  	ufshcd_clear_eh_in_progress(hba);
>  	spin_unlock_irqrestore(hba->host->host_lock, flags);
>  	ufshcd_scsi_unblock_requests(hba);
>  	ufshcd_err_handling_unprepare(hba);
> +	up(&hba->eh_sem);
>  }
> 
>  /**
> @@ -6856,6 +6858,7 @@ static int ufshcd_reset_and_restore(struct 
> ufs_hba *hba)
>  	 */
>  	scsi_report_bus_reset(hba->host, 0);
>  	if (err) {
> +		hba->ufshcd_state = UFSHCD_STATE_ERROR;
>  		hba->saved_err |= saved_err;
>  		hba->saved_uic_err |= saved_uic_err;
>  	}
> @@ -7704,8 +7707,10 @@ static void ufshcd_async_scan(void *data,
> async_cookie_t cookie)
>  	struct ufs_hba *hba = (struct ufs_hba *)data;
>  	int ret;
> 
> +	down(&hba->eh_sem);
>  	/* Initialize hba, detect and initialize UFS device */
>  	ret = ufshcd_probe_hba(hba, true);
> +	up(&hba->eh_sem);
>  	if (ret)
>  		goto out;
> 
> @@ -8718,6 +8723,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
>  	int ret = 0;
>  	ktime_t start = ktime_get();
> 
> +	down(&hba->eh_sem);
>  	if (!hba || !hba->is_powered)
>  		return 0;
> 
> @@ -8748,6 +8754,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
>  		hba->curr_dev_pwr_mode, hba->uic_link_state);
>  	if (!ret)
>  		hba->is_sys_suspended = true;
> +	else
> +		up(&hba->eh_sem);
>  	return ret;
>  }
>  EXPORT_SYMBOL(ufshcd_system_suspend);
> @@ -8764,8 +8772,10 @@ int ufshcd_system_resume(struct ufs_hba *hba)
>  	int ret = 0;
>  	ktime_t start = ktime_get();
> 
> -	if (!hba)
> +	if (!hba) {
> +		up(&hba->eh_sem);
>  		return -EINVAL;
> +	}
> 
>  	if (!hba->is_powered || pm_runtime_suspended(hba->dev))
>  		/*
> @@ -8781,6 +8791,7 @@ int ufshcd_system_resume(struct ufs_hba *hba)
>  		hba->curr_dev_pwr_mode, hba->uic_link_state);
>  	if (!ret)
>  		hba->is_sys_suspended = false;
> +	up(&hba->eh_sem);
>  	return ret;
>  }
>  EXPORT_SYMBOL(ufshcd_system_resume);
> @@ -8872,6 +8883,7 @@ int ufshcd_shutdown(struct ufs_hba *hba)
>  {
>  	int ret = 0;
> 
> +	down(&hba->eh_sem);
>  	if (!hba->is_powered)
>  		goto out;
> 
> @@ -8888,6 +8900,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
>  out:
>  	if (ret)
>  		dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
> +	hba->is_powered = false;
> +	up(&hba->eh_sem);
>  	/* allow force shutdown even in case of errors */
>  	return 0;
>  }
> @@ -9082,6 +9096,8 @@ int ufshcd_init(struct ufs_hba *hba, void
> __iomem *mmio_base, unsigned int irq)
>  	INIT_WORK(&hba->eh_work, ufshcd_err_handler);
>  	INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler);
> 
> +	sema_init(&hba->eh_sem, 1);
> +
>  	/* Initialize UIC command mutex */
>  	mutex_init(&hba->uic_cmd_mutex);
> 
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 47eb143..1e680bf 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -728,6 +728,7 @@ struct ufs_hba {
>  	u32 intr_mask;
>  	u16 ee_ctrl_mask;
>  	bool is_powered;
> +	struct semaphore eh_sem;
> 
>  	/* Work Queues */
>  	struct workqueue_struct *eh_wq;

Reviewed-by: Hongwu Su<hongwus@codeaurora.org>

Re: [PATCH v3 1/3] scsi: ufs: Serialize eh_work with system PM events and async scan

[Asutosh Das (asd)]

On 11/16/2020 11:04 PM, Can Guo wrote:
> Serialize eh_work with system PM events and async scan to make sure eh_work
> does not run in parallel with them.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---

Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>

>   drivers/scsi/ufs/ufshcd.c | 64 +++++++++++++++++++++++++++++------------------
>   drivers/scsi/ufs/ufshcd.h |  1 +
>   2 files changed, 41 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 1d8134e..7e764e8 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -5597,7 +5597,9 @@ static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba)
>   static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
>   {
>   	pm_runtime_get_sync(hba->dev);
> -	if (pm_runtime_suspended(hba->dev)) {
> +	if (pm_runtime_status_suspended(hba->dev) || hba->is_sys_suspended) {
> +		enum ufs_pm_op pm_op;
> +
>   		/*
>   		 * Don't assume anything of pm_runtime_get_sync(), if
>   		 * resume fails, irq and clocks can be OFF, and powers
> @@ -5612,7 +5614,8 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
>   		if (!ufshcd_is_clkgating_allowed(hba))
>   			ufshcd_setup_clocks(hba, true);
>   		ufshcd_release(hba);
> -		ufshcd_vops_resume(hba, UFS_RUNTIME_PM);
> +		pm_op = hba->is_sys_suspended ? UFS_RUNTIME_PM : UFS_SYSTEM_PM;
> +		ufshcd_vops_resume(hba, pm_op);
>   	} else {
>   		ufshcd_hold(hba, false);
>   		if (hba->clk_scaling.is_allowed) {
> @@ -5633,7 +5636,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
>   
>   static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
>   {
> -	return (hba->ufshcd_state == UFSHCD_STATE_ERROR ||
> +	return (!hba->is_powered || hba->ufshcd_state == UFSHCD_STATE_ERROR ||
>   		(!(hba->saved_err || hba->saved_uic_err || hba->force_reset ||
>   			ufshcd_is_link_broken(hba))));
>   }
> @@ -5646,6 +5649,7 @@ static void ufshcd_recover_pm_error(struct ufs_hba *hba)
>   	struct request_queue *q;
>   	int ret;
>   
> +	hba->is_sys_suspended = false;
>   	/*
>   	 * Set RPM status of hba device to RPM_ACTIVE,
>   	 * this also clears its runtime error.
> @@ -5704,11 +5708,13 @@ static void ufshcd_err_handler(struct work_struct *work)
>   
>   	hba = container_of(work, struct ufs_hba, eh_work);
>   
> +	down(&hba->eh_sem);
>   	spin_lock_irqsave(hba->host->host_lock, flags);
>   	if (ufshcd_err_handling_should_stop(hba)) {
>   		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
>   			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
>   		spin_unlock_irqrestore(hba->host->host_lock, flags);
> +		up(&hba->eh_sem);
>   		return;
>   	}
>   	ufshcd_set_eh_in_progress(hba);
> @@ -5716,20 +5722,18 @@ static void ufshcd_err_handler(struct work_struct *work)
>   	ufshcd_err_handling_prepare(hba);
>   	spin_lock_irqsave(hba->host->host_lock, flags);
>   	ufshcd_scsi_block_requests(hba);
> -	/*
> -	 * A full reset and restore might have happened after preparation
> -	 * is finished, double check whether we should stop.
> -	 */
> -	if (ufshcd_err_handling_should_stop(hba)) {
> -		if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
> -			hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
> -		goto out;
> -	}
>   	hba->ufshcd_state = UFSHCD_STATE_RESET;
>   
>   	/* Complete requests that have door-bell cleared by h/w */
>   	ufshcd_complete_requests(hba);
>   
> +	/*
> +	 * A full reset and restore might have happened after preparation
> +	 * is finished, double check whether we should stop.
> +	 */
> +	if (ufshcd_err_handling_should_stop(hba))
> +		goto skip_err_handling;
> +
>   	if (hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
>   		bool ret;
>   
> @@ -5737,17 +5741,10 @@ static void ufshcd_err_handler(struct work_struct *work)
>   		/* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */
>   		ret = ufshcd_quirk_dl_nac_errors(hba);
>   		spin_lock_irqsave(hba->host->host_lock, flags);
> -		if (!ret && !hba->force_reset && ufshcd_is_link_active(hba))
> +		if (!ret && ufshcd_err_handling_should_stop(hba))
>   			goto skip_err_handling;
>   	}
>   
> -	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
> -	    ufshcd_is_saved_err_fatal(hba) ||
> -	    ((hba->saved_err & UIC_ERROR) &&
> -	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
> -				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR))))
> -		needs_reset = true;
> -
>   	if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
>   	    (hba->saved_uic_err &&
>   	     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
> @@ -5767,8 +5764,14 @@ static void ufshcd_err_handler(struct work_struct *work)
>   	 * transfers forcefully because they will get cleared during
>   	 * host reset and restore
>   	 */
> -	if (needs_reset)
> +	if (hba->force_reset || ufshcd_is_link_broken(hba) ||
> +	    ufshcd_is_saved_err_fatal(hba) ||
> +	    ((hba->saved_err & UIC_ERROR) &&
> +	     (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
> +				    UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))) {
> +		needs_reset = true;
>   		goto do_reset;
> +	}
>   
>   	/*
>   	 * If LINERESET was caught, UFS might have been put to PWM mode,
> @@ -5876,12 +5879,11 @@ static void ufshcd_err_handler(struct work_struct *work)
>   			dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x",
>   			    __func__, hba->saved_err, hba->saved_uic_err);
>   	}
> -
> -out:
>   	ufshcd_clear_eh_in_progress(hba);
>   	spin_unlock_irqrestore(hba->host->host_lock, flags);
>   	ufshcd_scsi_unblock_requests(hba);
>   	ufshcd_err_handling_unprepare(hba);
> +	up(&hba->eh_sem);
>   }
>   
>   /**
> @@ -6856,6 +6858,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
>   	 */
>   	scsi_report_bus_reset(hba->host, 0);
>   	if (err) {
> +		hba->ufshcd_state = UFSHCD_STATE_ERROR;
>   		hba->saved_err |= saved_err;
>   		hba->saved_uic_err |= saved_uic_err;
>   	}
> @@ -7704,8 +7707,10 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
>   	struct ufs_hba *hba = (struct ufs_hba *)data;
>   	int ret;
>   
> +	down(&hba->eh_sem);
>   	/* Initialize hba, detect and initialize UFS device */
>   	ret = ufshcd_probe_hba(hba, true);
> +	up(&hba->eh_sem);
>   	if (ret)
>   		goto out;
>   
> @@ -8718,6 +8723,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
>   	int ret = 0;
>   	ktime_t start = ktime_get();
>   
> +	down(&hba->eh_sem);
>   	if (!hba || !hba->is_powered)
>   		return 0;
>   
> @@ -8748,6 +8754,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
>   		hba->curr_dev_pwr_mode, hba->uic_link_state);
>   	if (!ret)
>   		hba->is_sys_suspended = true;
> +	else
> +		up(&hba->eh_sem);
>   	return ret;
>   }
>   EXPORT_SYMBOL(ufshcd_system_suspend);
> @@ -8764,8 +8772,10 @@ int ufshcd_system_resume(struct ufs_hba *hba)
>   	int ret = 0;
>   	ktime_t start = ktime_get();
>   
> -	if (!hba)
> +	if (!hba) {
> +		up(&hba->eh_sem);
>   		return -EINVAL;
> +	}
>   
>   	if (!hba->is_powered || pm_runtime_suspended(hba->dev))
>   		/*
> @@ -8781,6 +8791,7 @@ int ufshcd_system_resume(struct ufs_hba *hba)
>   		hba->curr_dev_pwr_mode, hba->uic_link_state);
>   	if (!ret)
>   		hba->is_sys_suspended = false;
> +	up(&hba->eh_sem);
>   	return ret;
>   }
>   EXPORT_SYMBOL(ufshcd_system_resume);
> @@ -8872,6 +8883,7 @@ int ufshcd_shutdown(struct ufs_hba *hba)
>   {
>   	int ret = 0;
>   
> +	down(&hba->eh_sem);
>   	if (!hba->is_powered)
>   		goto out;
>   
> @@ -8888,6 +8900,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
>   out:
>   	if (ret)
>   		dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
> +	hba->is_powered = false;
> +	up(&hba->eh_sem);
>   	/* allow force shutdown even in case of errors */
>   	return 0;
>   }
> @@ -9082,6 +9096,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>   	INIT_WORK(&hba->eh_work, ufshcd_err_handler);
>   	INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler);
>   
> +	sema_init(&hba->eh_sem, 1);
> +
>   	/* Initialize UIC command mutex */
>   	mutex_init(&hba->uic_cmd_mutex);
>   
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 47eb143..1e680bf 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -728,6 +728,7 @@ struct ufs_hba {
>   	u32 intr_mask;
>   	u16 ee_ctrl_mask;
>   	bool is_powered;
> +	struct semaphore eh_sem;
>   
>   	/* Work Queues */
>   	struct workqueue_struct *eh_wq;
> 


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

[PATCH v3 2/3] scsi: ufs: Fix a racing problem between ufshcd_abort and eh_work

[Can Guo]

In current task abort routine, if task abort happens to the device W-LU,
the code directly jumps to ufshcd_eh_host_reset_handler() to perform a
full reset and restore then returns FAIL or SUCCESS. Commands sent to the
device W-LU are most likely the SSU cmds sent during UFS PM operations. If
such SSU cmd enters task abort routine, when ufshcd_eh_host_reset_handler()
flushes eh_work, there will be racing because err_handler is serialized
with any PM operations.

Since the main idea of aborting one cmd to the device W-LU is to perform
a full reset and restore, in order to resolve the racing problem, we merely
clean up the lrb taken by this cmd, queue the eh_work and abort the cmd.
Since the cmd has been aborted, the PM operation which sends the cmd simply
errors out, thus err_handler will not be blocked by ongoing PM operations
and err_handler can also recover PM error if any, which comes as another
benefit of this change.

Because such cmd is aborted even before it is actually cleared from HW, set
the lrb->in_use flag to prevent subsequent cmds, including SCSI cmds and
dev cmds, from taking the lrb released by this cmd. Flag lrb->in_use shall
evetually be cleared in __ufshcd_transfer_req_compl() invoked by the full
reset and restore from err_handler.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 55 ++++++++++++++++++++++++++++++++++++-----------
 drivers/scsi/ufs/ufshcd.h |  2 ++
 2 files changed, 45 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 7e764e8..cd7394e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2539,6 +2539,14 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		(hba->clk_gating.state != CLKS_ON));
 
 	lrbp = &hba->lrb[tag];
+	if (unlikely(lrbp->in_use)) {
+		if (hba->pm_op_in_progress)
+			set_host_byte(cmd, DID_BAD_TARGET);
+		else
+			err = SCSI_MLQUEUE_HOST_BUSY;
+		ufshcd_release(hba);
+		goto out;
+	}
 
 	WARN_ON(lrbp->cmd);
 	lrbp->cmd = cmd;
@@ -2781,6 +2789,11 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 
 	init_completion(&wait);
 	lrbp = &hba->lrb[tag];
+	if (unlikely(lrbp->in_use)) {
+		err = -EBUSY;
+		goto out;
+	}
+
 	WARN_ON(lrbp->cmd);
 	err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag);
 	if (unlikely(err))
@@ -2797,6 +2810,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 
 	err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);
 
+out:
 	ufshcd_add_query_upiu_trace(hba, tag,
 			err ? "query_complete_err" : "query_complete");
 
@@ -4932,6 +4946,7 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 
 	for_each_set_bit(index, &completed_reqs, hba->nutrs) {
 		lrbp = &hba->lrb[index];
+		lrbp->in_use = false;
 		lrbp->compl_time_stamp = ktime_get();
 		cmd = lrbp->cmd;
 		if (cmd) {
@@ -6374,8 +6389,12 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 
 	init_completion(&wait);
 	lrbp = &hba->lrb[tag];
-	WARN_ON(lrbp->cmd);
+	if (unlikely(lrbp->in_use)) {
+		err = -EBUSY;
+		goto out;
+	}
 
+	WARN_ON(lrbp->cmd);
 	lrbp->cmd = NULL;
 	lrbp->sense_bufflen = 0;
 	lrbp->sense_buffer = NULL;
@@ -6447,6 +6466,7 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 		}
 	}
 
+out:
 	blk_put_request(req);
 out_unlock:
 	up_read(&hba->clk_scaling_lock);
@@ -6696,16 +6716,6 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		BUG();
 	}
 
-	/*
-	 * Task abort to the device W-LUN is illegal. When this command
-	 * will fail, due to spec violation, scsi err handling next step
-	 * will be to send LU reset which, again, is a spec violation.
-	 * To avoid these unnecessary/illegal step we skip to the last error
-	 * handling stage: reset and restore.
-	 */
-	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN)
-		return ufshcd_eh_host_reset_handler(cmd);
-
 	ufshcd_hold(hba, false);
 	reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	/* If command is already aborted/completed, return SUCCESS */
@@ -6726,7 +6736,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 	 * to reduce repeated printouts. For other aborted requests only print
 	 * basic details.
 	 */
-	scsi_print_command(hba->lrb[tag].cmd);
+	scsi_print_command(cmd);
 	if (!hba->req_abort_count) {
 		ufshcd_update_reg_hist(&hba->ufs_stats.task_abort, 0);
 		ufshcd_print_host_regs(hba);
@@ -6745,6 +6755,27 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto cleanup;
 	}
 
+	/*
+	 * Task abort to the device W-LUN is illegal. When this command
+	 * will fail, due to spec violation, scsi err handling next step
+	 * will be to send LU reset which, again, is a spec violation.
+	 * To avoid these unnecessary/illegal steps, first we clean up
+	 * the lrb taken by this cmd and mark the lrb as in_use, then
+	 * queue the eh_work and bail.
+	 */
+	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) {
+		spin_lock_irqsave(host->host_lock, flags);
+		if (lrbp->cmd) {
+			__ufshcd_transfer_req_compl(hba, (1UL << tag));
+			__set_bit(tag, &hba->outstanding_reqs);
+			lrbp->in_use = true;
+			hba->force_reset = true;
+			ufshcd_schedule_eh_work(hba);
+		}
+		spin_unlock_irqrestore(host->host_lock, flags);
+		goto out;
+	}
+
 	/* Skip task abort in case previous aborts failed and report failure */
 	if (lrbp->req_abort_skip)
 		err = -EIO;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 1e680bf..66e5338 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -163,6 +163,7 @@ struct ufs_pm_lvl_states {
  * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
  * @data_unit_num: the data unit number for the first block for inline crypto
  * @req_abort_skip: skip request abort task flag
+ * @in_use: indicates that this lrb is still in use
  */
 struct ufshcd_lrb {
 	struct utp_transfer_req_desc *utr_descriptor_ptr;
@@ -192,6 +193,7 @@ struct ufshcd_lrb {
 #endif
 
 	bool req_abort_skip;
+	bool in_use;
 };
 
 /**
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v3 2/3] scsi: ufs: Fix a racing problem between ufshcd_abort and eh_work

[Asutosh Das (asd)]

On 11/16/2020 11:04 PM, Can Guo wrote:
> In current task abort routine, if task abort happens to the device W-LU,
> the code directly jumps to ufshcd_eh_host_reset_handler() to perform a
> full reset and restore then returns FAIL or SUCCESS. Commands sent to the
> device W-LU are most likely the SSU cmds sent during UFS PM operations. If
> such SSU cmd enters task abort routine, when ufshcd_eh_host_reset_handler()
> flushes eh_work, there will be racing because err_handler is serialized
> with any PM operations.
> 
> Since the main idea of aborting one cmd to the device W-LU is to perform
> a full reset and restore, in order to resolve the racing problem, we merely
> clean up the lrb taken by this cmd, queue the eh_work and abort the cmd.
> Since the cmd has been aborted, the PM operation which sends the cmd simply
> errors out, thus err_handler will not be blocked by ongoing PM operations
> and err_handler can also recover PM error if any, which comes as another
> benefit of this change.
> 
> Because such cmd is aborted even before it is actually cleared from HW, set
> the lrb->in_use flag to prevent subsequent cmds, including SCSI cmds and
> dev cmds, from taking the lrb released by this cmd. Flag lrb->in_use shall
> evetually be cleared in __ufshcd_transfer_req_compl() invoked by the full
> reset and restore from err_handler.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---

Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>

>   drivers/scsi/ufs/ufshcd.c | 55 ++++++++++++++++++++++++++++++++++++-----------
>   drivers/scsi/ufs/ufshcd.h |  2 ++
>   2 files changed, 45 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 7e764e8..cd7394e 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2539,6 +2539,14 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>   		(hba->clk_gating.state != CLKS_ON));
>   
>   	lrbp = &hba->lrb[tag];
> +	if (unlikely(lrbp->in_use)) {
> +		if (hba->pm_op_in_progress)
> +			set_host_byte(cmd, DID_BAD_TARGET);
> +		else
> +			err = SCSI_MLQUEUE_HOST_BUSY;
> +		ufshcd_release(hba);
> +		goto out;
> +	}
>   
>   	WARN_ON(lrbp->cmd);
>   	lrbp->cmd = cmd;
> @@ -2781,6 +2789,11 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
>   
>   	init_completion(&wait);
>   	lrbp = &hba->lrb[tag];
> +	if (unlikely(lrbp->in_use)) {
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
>   	WARN_ON(lrbp->cmd);
>   	err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag);
>   	if (unlikely(err))
> @@ -2797,6 +2810,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
>   
>   	err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);
>   
> +out:
>   	ufshcd_add_query_upiu_trace(hba, tag,
>   			err ? "query_complete_err" : "query_complete");
>   
> @@ -4932,6 +4946,7 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
>   
>   	for_each_set_bit(index, &completed_reqs, hba->nutrs) {
>   		lrbp = &hba->lrb[index];
> +		lrbp->in_use = false;
>   		lrbp->compl_time_stamp = ktime_get();
>   		cmd = lrbp->cmd;
>   		if (cmd) {
> @@ -6374,8 +6389,12 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
>   
>   	init_completion(&wait);
>   	lrbp = &hba->lrb[tag];
> -	WARN_ON(lrbp->cmd);
> +	if (unlikely(lrbp->in_use)) {
> +		err = -EBUSY;
> +		goto out;
> +	}
>   
> +	WARN_ON(lrbp->cmd);
>   	lrbp->cmd = NULL;
>   	lrbp->sense_bufflen = 0;
>   	lrbp->sense_buffer = NULL;
> @@ -6447,6 +6466,7 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
>   		}
>   	}
>   
> +out:
>   	blk_put_request(req);
>   out_unlock:
>   	up_read(&hba->clk_scaling_lock);
> @@ -6696,16 +6716,6 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>   		BUG();
>   	}
>   
> -	/*
> -	 * Task abort to the device W-LUN is illegal. When this command
> -	 * will fail, due to spec violation, scsi err handling next step
> -	 * will be to send LU reset which, again, is a spec violation.
> -	 * To avoid these unnecessary/illegal step we skip to the last error
> -	 * handling stage: reset and restore.
> -	 */
> -	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN)
> -		return ufshcd_eh_host_reset_handler(cmd);
> -
>   	ufshcd_hold(hba, false);
>   	reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
>   	/* If command is already aborted/completed, return SUCCESS */
> @@ -6726,7 +6736,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>   	 * to reduce repeated printouts. For other aborted requests only print
>   	 * basic details.
>   	 */
> -	scsi_print_command(hba->lrb[tag].cmd);
> +	scsi_print_command(cmd);
>   	if (!hba->req_abort_count) {
>   		ufshcd_update_reg_hist(&hba->ufs_stats.task_abort, 0);
>   		ufshcd_print_host_regs(hba);
> @@ -6745,6 +6755,27 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>   		goto cleanup;
>   	}
>   
> +	/*
> +	 * Task abort to the device W-LUN is illegal. When this command
> +	 * will fail, due to spec violation, scsi err handling next step
> +	 * will be to send LU reset which, again, is a spec violation.
> +	 * To avoid these unnecessary/illegal steps, first we clean up
> +	 * the lrb taken by this cmd and mark the lrb as in_use, then
> +	 * queue the eh_work and bail.
> +	 */
> +	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) {
> +		spin_lock_irqsave(host->host_lock, flags);
> +		if (lrbp->cmd) {
> +			__ufshcd_transfer_req_compl(hba, (1UL << tag));
> +			__set_bit(tag, &hba->outstanding_reqs);
> +			lrbp->in_use = true;
> +			hba->force_reset = true;
> +			ufshcd_schedule_eh_work(hba);
> +		}
> +		spin_unlock_irqrestore(host->host_lock, flags);
> +		goto out;
> +	}
> +
>   	/* Skip task abort in case previous aborts failed and report failure */
>   	if (lrbp->req_abort_skip)
>   		err = -EIO;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 1e680bf..66e5338 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -163,6 +163,7 @@ struct ufs_pm_lvl_states {
>    * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
>    * @data_unit_num: the data unit number for the first block for inline crypto
>    * @req_abort_skip: skip request abort task flag
> + * @in_use: indicates that this lrb is still in use
>    */
>   struct ufshcd_lrb {
>   	struct utp_transfer_req_desc *utr_descriptor_ptr;
> @@ -192,6 +193,7 @@ struct ufshcd_lrb {
>   #endif
>   
>   	bool req_abort_skip;
> +	bool in_use;
>   };
>   
>   /**
> 


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

[PATCH v3 3/3] scsi: ufs: Print host regs in IRQ handler when AH8 error happens

[Can Guo]

When AH8 error happens, all the regs and states are dumped in err handler.
Sometime we need to look into host regs right after AH8 error happens,
which is before leaving the IRQ handler.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index cd7394e..a7857f6 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6057,7 +6057,8 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
 		hba->saved_uic_err |= hba->uic_error;
 
 		/* dump controller state before resetting */
-		if ((hba->saved_err & (INT_FATAL_ERRORS)) ||
+		if ((hba->saved_err &
+		     (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
 		    (hba->saved_uic_err &&
 		     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
 			dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v3 3/3] scsi: ufs: Print host regs in IRQ handler when AH8 error happens

[Asutosh Das (asd)]

On 11/16/2020 11:04 PM, Can Guo wrote:
> When AH8 error happens, all the regs and states are dumped in err handler.
> Sometime we need to look into host regs right after AH8 error happens,
> which is before leaving the IRQ handler.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---

Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>

>   drivers/scsi/ufs/ufshcd.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index cd7394e..a7857f6 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6057,7 +6057,8 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
>   		hba->saved_uic_err |= hba->uic_error;
>   
>   		/* dump controller state before resetting */
> -		if ((hba->saved_err & (INT_FATAL_ERRORS)) ||
> +		if ((hba->saved_err &
> +		     (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
>   		    (hba->saved_uic_err &&
>   		     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
>   			dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",
> 


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

Re: [PATCH v3 3/3] scsi: ufs: Print host regs in IRQ handler when AH8 error happens

[hongwus]

On 2020-11-18 01:23, Asutosh Das (asd) wrote:
> On 11/16/2020 11:04 PM, Can Guo wrote:
>> When AH8 error happens, all the regs and states are dumped in err 
>> handler.
>> Sometime we need to look into host regs right after AH8 error happens,
>> which is before leaving the IRQ handler.
>> 
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> ---
> 
> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
> 
>>   drivers/scsi/ufs/ufshcd.c | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index cd7394e..a7857f6 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -6057,7 +6057,8 @@ static irqreturn_t ufshcd_check_errors(struct 
>> ufs_hba *hba)
>>   		hba->saved_uic_err |= hba->uic_error;
>>     		/* dump controller state before resetting */
>> -		if ((hba->saved_err & (INT_FATAL_ERRORS)) ||
>> +		if ((hba->saved_err &
>> +		     (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
>>   		    (hba->saved_uic_err &&
>>   		     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
>>   			dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",
>> 

Reviewed-by: Hongwu Su<hongwus@codeaurora.org>

Re: [PATCH v3 3/3] scsi: ufs: Print host regs in IRQ handler when AH8 error happens

[nguyenb]

On 2020-11-16 23:04, Can Guo wrote:
> When AH8 error happens, all the regs and states are dumped in err 
> handler.
> Sometime we need to look into host regs right after AH8 error happens,
> which is before leaving the IRQ handler.
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---
>  drivers/scsi/ufs/ufshcd.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index cd7394e..a7857f6 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6057,7 +6057,8 @@ static irqreturn_t ufshcd_check_errors(struct
> ufs_hba *hba)
>  		hba->saved_uic_err |= hba->uic_error;
> 
>  		/* dump controller state before resetting */
> -		if ((hba->saved_err & (INT_FATAL_ERRORS)) ||
> +		if ((hba->saved_err &
> +		     (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) ||
>  		    (hba->saved_uic_err &&
>  		     (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) {
>  			dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",

Reviewed-by: Bao D. Nguyen <nguyenb@codeaurora.org>