* [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier @ 2019-12-28 5:54 Nishad Kamdar 2019-12-28 5:55 ` [PATCH 1/2] scsi: mylex: " Nishad Kamdar ` (2 more replies) 0 siblings, 3 replies; 5+ messages in thread From: Nishad Kamdar @ 2019-12-28 5:54 UTC (permalink / raw) To: Hannes Reinecke, Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman, Joe Perches, Uwe Kleine-König Cc: linux-scsi, linux-kernel This patch corrects the SPDX License Identifier style in the scsi driver related files. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Nishad Kamdar (2): scsi: mylex: Use the correct style for SPDX License Identifier scsi: ufs: sysfs: Use the correct style for SPDX License Identifier drivers/scsi/myrb.h | 4 ++-- drivers/scsi/myrs.h | 4 ++-- drivers/scsi/ufs/ufs-sysfs.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] scsi: mylex: Use the correct style for SPDX License Identifier 2019-12-28 5:54 [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier Nishad Kamdar @ 2019-12-28 5:55 ` Nishad Kamdar 2019-12-29 11:52 ` Hannes Reinecke 2019-12-28 5:56 ` [PATCH 2/2] scsi: ufs: sysfs: " Nishad Kamdar 2020-01-03 2:59 ` [PATCH 0/2] scsi: " Martin K. Petersen 2 siblings, 1 reply; 5+ messages in thread From: Nishad Kamdar @ 2019-12-28 5:55 UTC (permalink / raw) To: Hannes Reinecke, Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman, Joe Perches, Uwe Kleine-König Cc: linux-scsi, linux-kernel This patch corrects the SPDX License Identifier style in header files related to Mylex DAC960/DAC1100 PCI RAID Controllers. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> --- drivers/scsi/myrb.h | 4 ++-- drivers/scsi/myrs.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/myrb.h b/drivers/scsi/myrb.h index 9289c19fcb2f..fb8eacfceee8 100644 --- a/drivers/scsi/myrb.h +++ b/drivers/scsi/myrb.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers * * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com> diff --git a/drivers/scsi/myrs.h b/drivers/scsi/myrs.h index e6702ee85e9f..9f6696d0ddd5 100644 --- a/drivers/scsi/myrs.h +++ b/drivers/scsi/myrs.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers * * This driver supports the newer, SCSI-based firmware interface only. -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] scsi: mylex: Use the correct style for SPDX License Identifier 2019-12-28 5:55 ` [PATCH 1/2] scsi: mylex: " Nishad Kamdar @ 2019-12-29 11:52 ` Hannes Reinecke 0 siblings, 0 replies; 5+ messages in thread From: Hannes Reinecke @ 2019-12-29 11:52 UTC (permalink / raw) To: Nishad Kamdar, Hannes Reinecke, Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman, Joe Perches, Uwe Kleine-König Cc: linux-scsi, linux-kernel On 12/28/19 6:55 AM, Nishad Kamdar wrote: > This patch corrects the SPDX License Identifier style in > header files related to Mylex DAC960/DAC1100 PCI RAID > Controllers. It assigns explicit block comment to the > SPDX License Identifier. > > Changes made by using a script provided by Joe Perches here: > https://lkml.org/lkml/2019/2/7/46. > > Suggested-by: Joe Perches <joe@perches.com> > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> > --- > drivers/scsi/myrb.h | 4 ++-- > drivers/scsi/myrs.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/scsi/myrb.h b/drivers/scsi/myrb.h > index 9289c19fcb2f..fb8eacfceee8 100644 > --- a/drivers/scsi/myrb.h > +++ b/drivers/scsi/myrb.h > @@ -1,5 +1,5 @@ > -/* SPDX-License-Identifier: GPL-2.0 > - * > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers > * > * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com> > diff --git a/drivers/scsi/myrs.h b/drivers/scsi/myrs.h > index e6702ee85e9f..9f6696d0ddd5 100644 > --- a/drivers/scsi/myrs.h > +++ b/drivers/scsi/myrs.h > @@ -1,5 +1,5 @@ > -/* SPDX-License-Identifier: GPL-2.0 > - * > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers > * > * This driver supports the newer, SCSI-based firmware interface only. > Reviewed-by: Hannes Reinecke <hare@suse.com> Cheers, Hannes -- Dr. Hannes Reinecke Teamlead Storage & Networking hare@suse.de +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] scsi: ufs: sysfs: Use the correct style for SPDX License Identifier 2019-12-28 5:54 [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier Nishad Kamdar 2019-12-28 5:55 ` [PATCH 1/2] scsi: mylex: " Nishad Kamdar @ 2019-12-28 5:56 ` Nishad Kamdar 2020-01-03 2:59 ` [PATCH 0/2] scsi: " Martin K. Petersen 2 siblings, 0 replies; 5+ messages in thread From: Nishad Kamdar @ 2019-12-28 5:56 UTC (permalink / raw) To: Hannes Reinecke, Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman, Joe Perches, Uwe Kleine-König Cc: linux-scsi, linux-kernel This patch corrects the SPDX License Identifier style in header file related to UFS Host Controller. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> --- drivers/scsi/ufs/ufs-sysfs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/scsi/ufs/ufs-sysfs.h index e5621e59a432..0f4e750a6748 100644 --- a/drivers/scsi/ufs/ufs-sysfs.h +++ b/drivers/scsi/ufs/ufs-sysfs.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright (C) 2018 Western Digital Corporation +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2018 Western Digital Corporation */ #ifndef __UFS_SYSFS_H__ -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier 2019-12-28 5:54 [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier Nishad Kamdar 2019-12-28 5:55 ` [PATCH 1/2] scsi: mylex: " Nishad Kamdar 2019-12-28 5:56 ` [PATCH 2/2] scsi: ufs: sysfs: " Nishad Kamdar @ 2020-01-03 2:59 ` Martin K. Petersen 2 siblings, 0 replies; 5+ messages in thread From: Martin K. Petersen @ 2020-01-03 2:59 UTC (permalink / raw) To: Nishad Kamdar Cc: Hannes Reinecke, Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman, Joe Perches, Uwe Kleine-König, linux-scsi, linux-kernel Nishad, > This patch corrects the SPDX License Identifier style in the scsi > driver related files. Applied to 5.6/scsi-queue, thanks! -- Martin K. Petersen Oracle Linux Engineering ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-01-03 2:59 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-12-28 5:54 [PATCH 0/2] scsi: Use the correct style for SPDX License Identifier Nishad Kamdar 2019-12-28 5:55 ` [PATCH 1/2] scsi: mylex: " Nishad Kamdar 2019-12-29 11:52 ` Hannes Reinecke 2019-12-28 5:56 ` [PATCH 2/2] scsi: ufs: sysfs: " Nishad Kamdar 2020-01-03 2:59 ` [PATCH 0/2] scsi: " Martin K. Petersen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).