* [PATCH 00/57] Convert files to ReST
@ 2019-04-16 2:55 Mauro Carvalho Chehab
2019-04-16 2:55 ` [PATCH 23/57] docs: netlabel: convert it " Mauro Carvalho Chehab
2019-04-18 12:42 ` Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files " Mauro Carvalho Chehab
0 siblings, 2 replies; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-16 2:55 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
Jonathan Corbet, linux-riscv, linux-fbdev, linux-s390,
Greg Kroah-Hartman, linux-watchdog, xdp-newbies,
linux-samsung-soc, linux-acpi, linux-stm32, bpf, linux-ide,
linux-pm, dri-devel, linux-scsi, linux-gpio, linuxppc-dev, x86,
dm-devel, target-devel, netdev, kexec, linux-fpga, linux-rdma,
linux-kbuild, Thomas Gleixner, linux-security-module, linux-usb,
linux-arm-kernel
This series convert lots of files to be properly parsed by Sphinx
as ReST files.
As it touches on lot of stuff, the series is based on linux-next.
I have a separate patch series with do the actual rename and
adjustment of references. I opted to submit this first, as it
sounds easier to merge this way, as each subsystem maintainer
can apply the conversion directly on their trees (or at docs
tree), avoiding merge conflects.
Both this series and the next steps are on my devel git tree,
at:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=all_with_indexes-v3
The final output in html can be seen at:
https://www.infradead.org/~mchehab/rst_conversion/
Mauro Carvalho Chehab (57):
docs: trace: fix some Sphinx warnings
docs: acpi: convert text files to ReST
docs: aoe: convert text files to ReST
docs: arm64: convert documentation to ReST format
docs: cdrom/cdrom-standard.tex: convert from LaTeX to ReST
docs: cdrom: convert remaining files to ReST
docs: cgroup-v1: convert to ReST file format
docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler
docs: cpu-freq: convert files to ReST
docs: device-mapper: convert it to ReST format
docs: extcon: move it to acpi dir and convert it to ReST
docs: fault-injection: convert it to ReST format
docs: fb: convert documentation to ReST format
docs: fpga: convert it to ReST
docs: gpio: convert it to ReST
docs: ide: convert it to ReST format
docs: infiniband: convert it to ReST format
docs: kbuild: convert it to ReST output
docs: kdump: convert it to ReST
docs: livepatch: convert it to ReST format
docs: locking: convert docs to ReST format
docs: mic: convert it to ReST format
docs: netlabel: convert it to ReST
docs: pcmcia: convert it to ReST format
docs: power: convert docs to ReST
docs: powerpc: convert docs to ReST
docs: pps/pps.txt convert it to ReST and move to API book
docs: ptp.txt: convert to ReST and move to driver-api
docs: riscv: convert it to ReST format
docs: s390: Debugging390.txt: convert table to ascii artwork
docs: s390: convert text files to ReST format
s390: include/asm/debug.h add kerneldoc markups
docs: serial: convert it to ReST format
docs: target: convert it to ReST format
docs: timers: convert documentation to ReST
docs: usb: convert documents to ReST
docs: watchdog: convert documents to ReST format
docs: x86: convert text files to ReST
docs: xilinx: convert eemi.txt to ReST
docs: scheduler: convert files to ReST
docs: EDID/HOWTO.txt: convert to ReST and move to kernel-API
docs: connector.txt: convert to ReST
docs: lcd-panel-cgram.txt convert it to ReST and move to admin-guide
docs: lp855x-driver.txt: convert to ReST and move to kernel-api
docs: m68k: convert it to ReST file format and add to arch bookset
docs: cma/debugfs.txt: convert to ReST and move to admin-guide/mm
docs: console.txt: convert to ReST format
docs: pti_intel_mid.txt: convert to ReST
docs: early-userspace: convert docs to ReST
docs: driver-model: convert it to ReST format
docs: arm: convert text files to ReST format
docs: memory-devices: convert ti-emif.txt to ReST format
docs: xen-tpmfront.txt: convert the file to ReST format
docs: bus-devices: ti-gpmc.txt: convert it to ReST
docs: nvmem: convert file to ReST format
docs: phy: convert samsung-usb2.txt to ReST format
docs: Prepare files to be renamed to *.rst
Documentation/EDID/HOWTO.txt | 29 +-
Documentation/acpi/DSD-properties-rules.txt | 4 +-
Documentation/acpi/acpi-lid.txt | 37 +-
Documentation/acpi/aml-debugger.txt | 31 +-
Documentation/acpi/apei/einj.txt | 59 +-
Documentation/acpi/apei/output_format.txt | 247 +-
Documentation/acpi/cppc_sysfs.txt | 52 +-
Documentation/acpi/debug.txt | 20 +-
.../drivers/extcon-intel-int3496.txt} | 14 +-
.../acpi/dsd/data-node-references.txt | 11 +-
Documentation/acpi/dsd/graph.txt | 24 +-
Documentation/acpi/dsd/leds.txt | 18 +-
Documentation/acpi/dsdt-override.txt | 4 +-
Documentation/acpi/enumeration.txt | 42 +-
Documentation/acpi/gpio-properties.txt | 42 +-
Documentation/acpi/i2c-muxes.txt | 21 +-
Documentation/acpi/initrd_table_override.txt | 90 +-
Documentation/acpi/linuxized-acpica.txt | 58 +-
Documentation/acpi/lpit.txt | 8 +-
Documentation/acpi/method-customizing.txt | 48 +-
Documentation/acpi/method-tracing.txt | 132 +-
Documentation/acpi/namespace.txt | 323 +-
Documentation/acpi/osi.txt | 3 +-
Documentation/acpi/scan_handlers.txt | 9 +-
Documentation/acpi/ssdt-overlays.txt | 128 +-
Documentation/acpi/video_extension.txt | 16 +-
Documentation/aoe/aoe.txt | 63 +-
Documentation/aoe/todo.txt | 3 +
Documentation/aoe/udev.txt | 2 +-
Documentation/arm/Booting | 71 +-
Documentation/arm/IXP4xx | 61 +-
Documentation/arm/Interrupts | 86 +-
Documentation/arm/Marvell/README | 537 ++--
Documentation/arm/Microchip/README | 63 +-
Documentation/arm/Netwinder | 59 +-
Documentation/arm/OMAP/DSS | 112 +-
Documentation/arm/OMAP/README | 7 +
Documentation/arm/OMAP/omap_pm | 55 +-
Documentation/arm/Porting | 14 +-
Documentation/arm/README | 50 +-
Documentation/arm/SA1100/ADSBitsy | 14 +-
Documentation/arm/SA1100/Assabet | 185 +-
Documentation/arm/SA1100/Brutus | 45 +-
Documentation/arm/SA1100/CERF | 10 +-
Documentation/arm/SA1100/FreeBird | 26 +-
Documentation/arm/SA1100/GraphicsClient | 46 +-
Documentation/arm/SA1100/GraphicsMaster | 13 +-
Documentation/arm/SA1100/HUW_WEBPANEL | 8 +-
Documentation/arm/SA1100/Itsy | 14 +-
Documentation/arm/SA1100/LART | 3 +-
Documentation/arm/SA1100/PLEB | 6 +-
Documentation/arm/SA1100/Pangolin | 10 +-
Documentation/arm/SA1100/Tifon | 4 +-
Documentation/arm/SA1100/Yopy | 5 +-
Documentation/arm/SA1100/empeg | 2 -
Documentation/arm/SA1100/nanoEngine | 6 +-
Documentation/arm/SA1100/serial_UART | 60 +-
Documentation/arm/SPEAr/overview.txt | 20 +-
Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 5 +-
.../arm/Samsung-S3C24XX/EB2410ITX.txt | 5 +-
Documentation/arm/Samsung-S3C24XX/GPIO.txt | 21 +-
Documentation/arm/Samsung-S3C24XX/H1940.txt | 5 +-
Documentation/arm/Samsung-S3C24XX/NAND.txt | 6 +-
.../arm/Samsung-S3C24XX/Overview.txt | 15 +-
Documentation/arm/Samsung-S3C24XX/S3C2412.txt | 5 +-
Documentation/arm/Samsung-S3C24XX/S3C2413.txt | 7 +-
.../arm/Samsung-S3C24XX/SMDK2440.txt | 5 +-
Documentation/arm/Samsung-S3C24XX/Suspend.txt | 20 +-
.../arm/Samsung-S3C24XX/USB-Host.txt | 16 +-
.../arm/Samsung/Bootloader-interface.txt | 27 +-
Documentation/arm/Samsung/GPIO.txt | 5 +-
Documentation/arm/Samsung/Overview.txt | 11 +-
Documentation/arm/Setup | 49 +-
Documentation/arm/VFP/release-notes.txt | 4 +-
.../arm/cluster-pm-race-avoidance.txt | 177 +-
Documentation/arm/firmware.txt | 14 +-
Documentation/arm/kernel_mode_neon.txt | 3 +
Documentation/arm/kernel_user_helpers.txt | 79 +-
Documentation/arm/keystone/Overview.txt | 47 +-
Documentation/arm/keystone/knav-qmss.txt | 6 +-
Documentation/arm/mem_alignment | 11 +-
Documentation/arm/memory.txt | 9 +-
Documentation/arm/nwfpe/NOTES | 3 +
Documentation/arm/nwfpe/README | 10 +-
Documentation/arm/nwfpe/README.FPE | 24 +-
Documentation/arm/nwfpe/TODO | 47 +-
Documentation/arm/pxa/mfp.txt | 106 +-
Documentation/arm/sti/overview.txt | 21 +-
Documentation/arm/sti/stih407-overview.txt | 9 +-
Documentation/arm/sti/stih415-overview.txt | 8 +-
Documentation/arm/sti/stih416-overview.txt | 5 +-
Documentation/arm/sti/stih418-overview.txt | 9 +-
.../arm/stm32/stm32f429-overview.rst | 5 +-
.../arm/stm32/stm32f746-overview.rst | 5 +-
.../arm/stm32/stm32f769-overview.rst | 5 +-
.../arm/stm32/stm32h743-overview.rst | 5 +-
.../arm/stm32/stm32mp157-overview.rst | 1 +
Documentation/arm/sunxi/README | 98 +-
Documentation/arm/sunxi/clocks.txt | 7 +-
Documentation/arm/swp_emulation | 24 +-
Documentation/arm/tcm.txt | 54 +-
Documentation/arm/uefi.txt | 39 +-
Documentation/arm/vlocks.txt | 9 +-
Documentation/arm64/acpi_object_usage.txt | 288 +-
Documentation/arm64/arm-acpi.txt | 153 +-
Documentation/arm64/booting.txt | 91 +-
Documentation/arm64/cpu-feature-registers.txt | 190 +-
Documentation/arm64/elf_hwcaps.txt | 50 +-
Documentation/arm64/hugetlbpage.txt | 7 +-
Documentation/arm64/legacy_instructions.txt | 43 +-
Documentation/arm64/memory.txt | 91 +-
.../arm64/pointer-authentication.txt | 2 +
Documentation/arm64/silicon-errata.txt | 63 +-
Documentation/arm64/sve.txt | 10 +-
Documentation/arm64/tagged-pointers.txt | 6 +-
Documentation/auxdisplay/lcd-panel-cgram.txt | 7 +-
Documentation/backlight/lp855x-driver.txt | 65 +-
Documentation/bt8xxgpio.txt | 1 -
Documentation/bus-devices/ti-gpmc.txt | 157 +-
Documentation/bus-virt-phys-mapping.txt | 50 +-
Documentation/cdrom/Makefile | 21 -
Documentation/cdrom/cdrom-standard.tex | 1026 -------
Documentation/cdrom/cdrom-standard.txt | 1063 +++++++
Documentation/cdrom/ide-cd | 178 +-
Documentation/cdrom/packet-writing.txt | 27 +-
Documentation/cgroup-v1/blkio-controller.txt | 103 +-
Documentation/cgroup-v1/cgroups.txt | 180 +-
Documentation/cgroup-v1/cpuacct.txt | 15 +-
Documentation/cgroup-v1/cpusets.txt | 203 +-
Documentation/cgroup-v1/devices.txt | 40 +-
Documentation/cgroup-v1/freezer-subsystem.txt | 14 +-
Documentation/cgroup-v1/hugetlb.txt | 31 +-
Documentation/cgroup-v1/memcg_test.txt | 259 +-
Documentation/cgroup-v1/memory.txt | 449 +--
Documentation/cgroup-v1/net_cls.txt | 37 +-
Documentation/cgroup-v1/net_prio.txt | 24 +-
Documentation/cgroup-v1/pids.txt | 78 +-
Documentation/cgroup-v1/rdma.txt | 66 +-
Documentation/cma/debugfs.txt | 6 +-
Documentation/connector/connector.txt | 128 +-
Documentation/console/console.txt | 61 +-
Documentation/cpu-freq/amd-powernow.txt | 11 +-
Documentation/cpu-freq/core.txt | 66 +-
Documentation/cpu-freq/cpu-drivers.txt | 217 +-
Documentation/cpu-freq/cpufreq-nforce2.txt | 12 +-
Documentation/cpu-freq/cpufreq-stats.txt | 141 +-
Documentation/cpu-freq/pcc-cpufreq.txt | 102 +-
.../device-mapper/cache-policies.txt | 24 +-
Documentation/device-mapper/cache.txt | 206 +-
Documentation/device-mapper/delay.txt | 29 +-
Documentation/device-mapper/dm-crypt.txt | 57 +-
Documentation/device-mapper/dm-flakey.txt | 45 +-
Documentation/device-mapper/dm-init.txt | 75 +-
Documentation/device-mapper/dm-integrity.txt | 55 +-
Documentation/device-mapper/dm-io.txt | 14 +-
Documentation/device-mapper/dm-log.txt | 5 +-
.../device-mapper/dm-queue-length.txt | 25 +-
Documentation/device-mapper/dm-raid.txt | 225 +-
.../device-mapper/dm-service-time.txt | 68 +-
Documentation/device-mapper/dm-uevent.txt | 143 +-
Documentation/device-mapper/dm-zoned.txt | 10 +-
Documentation/device-mapper/era.txt | 36 +-
Documentation/device-mapper/kcopyd.txt | 10 +-
Documentation/device-mapper/linear.txt | 100 +-
Documentation/device-mapper/log-writes.txt | 91 +-
.../device-mapper/persistent-data.txt | 4 +
Documentation/device-mapper/snapshot.txt | 116 +-
Documentation/device-mapper/statistics.txt | 62 +-
Documentation/device-mapper/striped.txt | 68 +-
Documentation/device-mapper/switch.txt | 47 +-
.../device-mapper/thin-provisioning.txt | 68 +-
Documentation/device-mapper/unstriped.txt | 111 +-
Documentation/device-mapper/verity.txt | 20 +-
Documentation/device-mapper/writecache.txt | 13 +-
Documentation/device-mapper/zero.txt | 14 +-
Documentation/driver-model/binding.txt | 20 +-
Documentation/driver-model/bus.txt | 69 +-
Documentation/driver-model/class.txt | 74 +-
.../driver-model/design-patterns.txt | 106 +-
Documentation/driver-model/device.txt | 57 +-
Documentation/driver-model/devres.txt | 50 +-
Documentation/driver-model/driver.txt | 112 +-
Documentation/driver-model/overview.txt | 37 +-
Documentation/driver-model/platform.txt | 30 +-
Documentation/driver-model/porting.txt | 333 +--
Documentation/early-userspace/README | 3 +
.../early-userspace/buffer-format.txt | 19 +-
.../fault-injection/fault-injection.txt | 265 +-
.../fault-injection/notifier-error-inject.txt | 18 +-
.../fault-injection/nvme-fault-injection.txt | 174 +-
.../fault-injection/provoke-crashes.txt | 40 +-
Documentation/fb/api.txt | 29 +-
Documentation/fb/arkfb.txt | 8 +-
Documentation/fb/aty128fb.txt | 31 +-
Documentation/fb/cirrusfb.txt | 47 +-
Documentation/fb/cmap_xfbdev.txt | 57 +-
Documentation/fb/deferred_io.txt | 28 +-
Documentation/fb/efifb.txt | 18 +-
Documentation/fb/ep93xx-fb.txt | 25 +-
Documentation/fb/fbcon.txt | 177 +-
Documentation/fb/framebuffer.txt | 79 +-
Documentation/fb/gxfb.txt | 22 +-
Documentation/fb/intel810.txt | 77 +-
Documentation/fb/intelfb.txt | 62 +-
Documentation/fb/internals.txt | 24 +-
Documentation/fb/lxfb.txt | 23 +-
Documentation/fb/matroxfb.txt | 526 ++--
Documentation/fb/metronomefb.txt | 8 +-
Documentation/fb/modedb.txt | 44 +-
Documentation/fb/pvr2fb.txt | 55 +-
Documentation/fb/pxafb.txt | 81 +-
Documentation/fb/s3fb.txt | 8 +-
Documentation/fb/sa1100fb.txt | 23 +-
Documentation/fb/sh7760fb.txt | 153 +-
Documentation/fb/sisfb.txt | 40 +-
Documentation/fb/sm501.txt | 7 +-
Documentation/fb/sm712fb.txt | 18 +-
Documentation/fb/sstfb.txt | 231 +-
Documentation/fb/tgafb.txt | 30 +-
Documentation/fb/tridentfb.txt | 34 +-
Documentation/fb/udlfb.txt | 55 +-
Documentation/fb/uvesafb.txt | 128 +-
Documentation/fb/vesafb.txt | 121 +-
Documentation/fb/viafb.txt | 393 +--
Documentation/fb/vt8623fb.txt | 10 +-
Documentation/fpga/dfl.txt | 58 +-
Documentation/gpio/sysfs.txt | 39 +-
Documentation/highuid.txt | 2 +-
Documentation/ide/ide-tape.txt | 23 +-
Documentation/ide/ide.txt | 147 +-
Documentation/ide/warm-plug-howto.txt | 10 +-
Documentation/index.rst | 1 +
Documentation/infiniband/core_locking.txt | 64 +-
Documentation/infiniband/ipoib.txt | 24 +-
Documentation/infiniband/opa_vnic.txt | 108 +-
Documentation/infiniband/sysfs.txt | 4 +-
Documentation/infiniband/tag_matching.txt | 5 +
Documentation/infiniband/user_mad.txt | 33 +-
Documentation/infiniband/user_verbs.txt | 12 +-
Documentation/kbuild/headers_install.txt | 5 +-
Documentation/kbuild/kbuild.txt | 119 +-
Documentation/kbuild/kconfig-language.txt | 232 +-
.../kbuild/kconfig-macro-language.txt | 37 +-
Documentation/kbuild/kconfig.txt | 136 +-
Documentation/kbuild/makefiles.txt | 518 ++--
Documentation/kbuild/modules.txt | 166 +-
Documentation/kdump/kdump.txt | 131 +-
Documentation/kdump/vmcoreinfo.txt | 59 +-
Documentation/kobject.txt | 2 +-
Documentation/ldm.txt | 3 +-
Documentation/livepatch/callbacks.txt | 12 +-
.../livepatch/cumulative-patches.txt | 14 +-
Documentation/livepatch/livepatch.txt | 56 +-
Documentation/livepatch/module-elf-format.txt | 211 +-
Documentation/livepatch/shadow-vars.txt | 65 +-
Documentation/locking/lockdep-design.txt | 41 +-
Documentation/locking/lockstat.txt | 219 +-
Documentation/locking/locktorture.txt | 105 +-
Documentation/locking/mutex-design.txt | 26 +-
Documentation/locking/rt-mutex-design.txt | 135 +-
Documentation/locking/rt-mutex.txt | 30 +-
Documentation/locking/spinlocks.txt | 32 +-
Documentation/locking/ww-mutex-design.txt | 82 +-
Documentation/m68k/kernel-options.txt | 319 +-
Documentation/memory-barriers.txt | 2 +-
Documentation/memory-devices/ti-emif.txt | 25 +-
Documentation/mic/mic_overview.txt | 6 +-
Documentation/mic/scif_overview.txt | 58 +-
Documentation/netlabel/cipso_ipv4.txt | 19 +-
Documentation/netlabel/introduction.txt | 16 +-
Documentation/netlabel/lsm_interface.txt | 16 +-
Documentation/numastat.txt | 1 -
Documentation/nvmem/nvmem.txt | 110 +-
Documentation/pcmcia/devicetable.txt | 4 +
Documentation/pcmcia/driver-changes.txt | 35 +-
Documentation/pcmcia/driver.txt | 18 +-
Documentation/pcmcia/locking.txt | 39 +-
Documentation/phy/samsung-usb2.txt | 60 +-
Documentation/pnp.txt | 11 +-
Documentation/power/apm-acpi.txt | 10 +-
Documentation/power/basic-pm-debugging.txt | 77 +-
Documentation/power/charger-manager.txt | 101 +-
Documentation/power/drivers-testing.txt | 5 +
Documentation/power/energy-model.txt | 101 +-
Documentation/power/freezing-of-tasks.txt | 91 +-
Documentation/power/interface.txt | 20 +-
Documentation/power/opp.txt | 175 +-
Documentation/power/pci.txt | 77 +-
Documentation/power/pm_qos_interface.txt | 127 +-
Documentation/power/power_supply_class.txt | 269 +-
Documentation/power/powercap/powercap.txt | 297 +-
Documentation/power/regulator/consumer.txt | 141 +-
Documentation/power/regulator/design.txt | 9 +-
Documentation/power/regulator/machine.txt | 47 +-
Documentation/power/regulator/overview.txt | 51 +-
Documentation/power/regulator/regulator.txt | 18 +-
Documentation/power/runtime_pm.txt | 234 +-
Documentation/power/s2ram.txt | 20 +-
.../power/suspend-and-cpuhotplug.txt | 42 +-
.../power/suspend-and-interrupts.txt | 2 +
Documentation/power/swsusp-and-swap-files.txt | 15 +-
Documentation/power/swsusp-dmcrypt.txt | 118 +-
Documentation/power/swsusp.txt | 639 ++--
Documentation/power/tricks.txt | 6 +-
Documentation/power/userland-swsusp.txt | 53 +-
Documentation/power/video.txt | 156 +-
Documentation/powerpc/DAWR-POWER9.txt | 10 +-
Documentation/powerpc/bootwrapper.txt | 28 +-
Documentation/powerpc/cpu_families.txt | 23 +-
Documentation/powerpc/cpu_features.txt | 6 +-
Documentation/powerpc/cxl.txt | 46 +-
Documentation/powerpc/cxlflash.txt | 8 +-
Documentation/powerpc/dscr.txt | 18 +-
.../powerpc/eeh-pci-error-recovery.txt | 108 +-
.../powerpc/firmware-assisted-dump.txt | 117 +-
Documentation/powerpc/hvcs.txt | 108 +-
Documentation/powerpc/isa-versions.rst | 13 +-
Documentation/powerpc/mpc52xx.txt | 12 +-
.../powerpc/pci_iov_resource_on_powernv.txt | 15 +-
Documentation/powerpc/pmu-ebb.txt | 1 +
Documentation/powerpc/ptrace.txt | 169 +-
Documentation/powerpc/qe_firmware.txt | 37 +-
Documentation/powerpc/syscall64-abi.txt | 29 +-
.../powerpc/transactional_memory.txt | 45 +-
Documentation/pps/pps.txt | 67 +-
Documentation/preempt-locking.txt | 2 +-
Documentation/pti/pti_intel_mid.txt | 135 +-
Documentation/ptp/ptp.txt | 26 +-
Documentation/rbtree.txt | 52 +-
Documentation/riscv/pmu.txt | 98 +-
Documentation/rtc.txt | 6 +-
Documentation/s390/3270.txt | 85 +-
Documentation/s390/CommonIO | 47 +-
Documentation/s390/DASD | 33 +-
Documentation/s390/Debugging390.txt | 2599 ++++++++++-------
Documentation/s390/cds.txt | 354 ++-
Documentation/s390/driver-model.txt | 179 +-
Documentation/s390/monreader.txt | 85 +-
Documentation/s390/qeth.txt | 36 +-
Documentation/s390/s390dbf.txt | 639 ++--
Documentation/s390/vfio-ap.txt | 487 +--
Documentation/s390/vfio-ccw.txt | 88 +-
Documentation/s390/zfcpdump.txt | 2 +
Documentation/scheduler/completion.txt | 38 +-
Documentation/scheduler/sched-arch.txt | 18 +-
Documentation/scheduler/sched-bwc.txt | 28 +-
Documentation/scheduler/sched-deadline.txt | 293 +-
Documentation/scheduler/sched-design-CFS.txt | 15 +-
Documentation/scheduler/sched-domains.txt | 8 +-
Documentation/scheduler/sched-energy.txt | 47 +-
Documentation/scheduler/sched-nice-design.txt | 6 +-
Documentation/scheduler/sched-rt-group.txt | 28 +-
Documentation/scheduler/sched-stats.txt | 35 +-
Documentation/security/tpm/xen-tpmfront.txt | 101 +-
Documentation/serial/README.cycladesZ | 5 +-
Documentation/serial/driver | 113 +-
Documentation/serial/moxa-smartio | 750 ++---
Documentation/serial/n_gsm.txt | 81 +-
Documentation/serial/rocket.txt | 144 +-
Documentation/serial/serial-iso7816.txt | 21 +-
Documentation/serial/serial-rs485.txt | 22 +-
Documentation/serial/tty.txt | 111 +-
Documentation/target/tcm_mod_builder.txt | 200 +-
Documentation/target/tcmu-design.txt | 268 +-
Documentation/timers/NO_HZ.txt | 40 +-
Documentation/timers/highres.txt | 11 +-
Documentation/timers/hpet.txt | 4 +-
Documentation/timers/hrtimers.txt | 6 +-
Documentation/timers/timekeeping.txt | 3 +-
Documentation/timers/timers-howto.txt | 15 +-
Documentation/trace/ftrace.rst | 1 +
Documentation/trace/histogram.rst | 86 +-
Documentation/usb/WUSB-Design-overview.txt | 56 +-
Documentation/usb/acm.txt | 156 +-
Documentation/usb/authorization.txt | 75 +-
Documentation/usb/chipidea.txt | 101 +-
Documentation/usb/dwc3.txt | 12 +-
Documentation/usb/ehci.txt | 42 +-
Documentation/usb/functionfs.txt | 17 +-
Documentation/usb/gadget-testing.txt | 609 ++--
Documentation/usb/gadget_configfs.txt | 302 +-
Documentation/usb/gadget_hid.txt | 175 +-
Documentation/usb/gadget_multi.txt | 43 +-
Documentation/usb/gadget_printer.txt | 155 +-
Documentation/usb/gadget_serial.txt | 73 +-
Documentation/usb/iuu_phoenix.txt | 34 +-
Documentation/usb/mass-storage.txt | 19 +-
Documentation/usb/misc_usbsevseg.txt | 9 +-
Documentation/usb/mtouchusb.txt | 42 +-
Documentation/usb/ohci.txt | 5 +-
Documentation/usb/rio.txt | 83 +-
Documentation/usb/usb-help.txt | 21 +-
Documentation/usb/usb-serial.txt | 203 +-
Documentation/usb/usbip_protocol.txt | 552 ++--
Documentation/usb/usbmon.txt | 100 +-
.../convert_drivers_to_kernel_api.txt | 109 +-
Documentation/watchdog/hpwdt.txt | 23 +-
Documentation/watchdog/mlx-wdt.txt | 24 +-
Documentation/watchdog/pcwd-watchdog.txt | 13 +-
Documentation/watchdog/watchdog-api.txt | 76 +-
.../watchdog/watchdog-kernel-api.txt | 89 +-
.../watchdog/watchdog-parameters.txt | 672 +++--
Documentation/watchdog/watchdog-pm.txt | 3 +
Documentation/watchdog/wdt.txt | 31 +-
Documentation/x86/amd-memory-encryption.txt | 10 +-
Documentation/x86/boot.txt | 578 ++--
Documentation/x86/earlyprintk.txt | 69 +-
Documentation/x86/entry_64.txt | 11 +-
Documentation/x86/exception-tables.txt | 245 +-
Documentation/x86/i386/IO-APIC.txt | 23 +-
Documentation/x86/intel_mpx.txt | 55 +-
Documentation/x86/microcode.txt | 51 +-
Documentation/x86/mtrr.txt | 442 +--
Documentation/x86/orc-unwinder.txt | 1 +
Documentation/x86/pat.txt | 217 +-
Documentation/x86/protection-keys.txt | 33 +-
Documentation/x86/pti.txt | 8 +-
Documentation/x86/resctrl_ui.txt | 621 ++--
Documentation/x86/tlb.txt | 12 +-
Documentation/x86/topology.txt | 26 +-
Documentation/x86/usb-legacy-support.txt | 33 +-
Documentation/x86/x86_64/5level-paging.txt | 14 +-
Documentation/x86/x86_64/boot-options.txt | 98 +-
Documentation/x86/x86_64/mm.txt | 212 +-
Documentation/x86/x86_64/uefi.txt | 21 +-
Documentation/x86/zero-page.txt | 67 +-
Documentation/xilinx/eemi.txt | 8 +-
Documentation/zorro.txt | 5 +-
MAINTAINERS | 2 +-
arch/arm64/kernel/kexec_image.c | 2 +-
arch/s390/include/asm/debug.h | 231 ++
drivers/cdrom/cdrom.c | 2 +-
include/linux/connector.h | 63 +-
433 files changed, 21459 insertions(+), 16370 deletions(-)
rename Documentation/{extcon/intel-int3496.txt => acpi/drivers/extcon-intel-int3496.txt} (66%)
delete mode 100644 Documentation/arm/SA1100/empeg
delete mode 100644 Documentation/cdrom/Makefile
delete mode 100644 Documentation/cdrom/cdrom-standard.tex
create mode 100644 Documentation/cdrom/cdrom-standard.txt
--
2.20.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 23/57] docs: netlabel: convert it to ReST
2019-04-16 2:55 [PATCH 00/57] Convert files to ReST Mauro Carvalho Chehab
@ 2019-04-16 2:55 ` Mauro Carvalho Chehab
2019-04-17 14:36 ` Paul Moore
2019-04-18 12:42 ` Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files " Mauro Carvalho Chehab
1 sibling, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-16 2:55 UTC (permalink / raw)
To: Linux Doc Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
Jonathan Corbet, Paul Moore, netdev, linux-security-module
Convert netlabel documentation to ReST.
This was trivial: just add proper title markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
Documentation/netlabel/cipso_ipv4.txt | 19 +++++++++++++------
Documentation/netlabel/introduction.txt | 16 +++++++++++-----
Documentation/netlabel/lsm_interface.txt | 16 +++++++++++-----
3 files changed, 35 insertions(+), 16 deletions(-)
diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt
index a6075481fd60..cbd3f3231221 100644
--- a/Documentation/netlabel/cipso_ipv4.txt
+++ b/Documentation/netlabel/cipso_ipv4.txt
@@ -1,10 +1,13 @@
+===================================
NetLabel CIPSO/IPv4 Protocol Engine
-==============================================================================
+===================================
+
Paul Moore, paul.moore@hp.com
May 17, 2006
- * Overview
+Overview
+========
The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial
IP Security Option (CIPSO) draft from July 16, 1992. A copy of this
@@ -13,7 +16,8 @@ draft can be found in this directory
it to an RFC standard it has become a de-facto standard for labeled
networking and is used in many trusted operating systems.
- * Outbound Packet Processing
+Outbound Packet Processing
+==========================
The CIPSO/IPv4 protocol engine applies the CIPSO IP option to packets by
adding the CIPSO label to the socket. This causes all packets leaving the
@@ -24,7 +28,8 @@ label by using the NetLabel security module API; if the NetLabel "domain" is
configured to use CIPSO for packet labeling then a CIPSO IP option will be
generated and attached to the socket.
- * Inbound Packet Processing
+Inbound Packet Processing
+=========================
The CIPSO/IPv4 protocol engine validates every CIPSO IP option it finds at the
IP layer without any special handling required by the LSM. However, in order
@@ -33,7 +38,8 @@ NetLabel security module API to extract the security attributes of the packet.
This is typically done at the socket layer using the 'socket_sock_rcv_skb()'
LSM hook.
- * Label Translation
+Label Translation
+=================
The CIPSO/IPv4 protocol engine contains a mechanism to translate CIPSO security
attributes such as sensitivity level and category to values which are
@@ -42,7 +48,8 @@ Domain Of Interpretation (DOI) definition and are configured through the
NetLabel user space communication layer. Each DOI definition can have a
different security attribute mapping table.
- * Label Translation Cache
+Label Translation Cache
+=======================
The NetLabel system provides a framework for caching security attribute
mappings from the network labels to the corresponding LSM identifiers. The
diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt
index 3caf77bcff0f..9333bbb0adc1 100644
--- a/Documentation/netlabel/introduction.txt
+++ b/Documentation/netlabel/introduction.txt
@@ -1,10 +1,13 @@
+=====================
NetLabel Introduction
-==============================================================================
+=====================
+
Paul Moore, paul.moore@hp.com
August 2, 2006
- * Overview
+Overview
+========
NetLabel is a mechanism which can be used by kernel security modules to attach
security attributes to outgoing network packets generated from user space
@@ -12,7 +15,8 @@ applications and read security attributes from incoming network packets. It
is composed of three main components, the protocol engines, the communication
layer, and the kernel security module API.
- * Protocol Engines
+Protocol Engines
+================
The protocol engines are responsible for both applying and retrieving the
network packet's security attributes. If any translation between the network
@@ -24,7 +28,8 @@ the NetLabel kernel security module API described below.
Detailed information about each NetLabel protocol engine can be found in this
directory.
- * Communication Layer
+Communication Layer
+===================
The communication layer exists to allow NetLabel configuration and monitoring
from user space. The NetLabel communication layer uses a message based
@@ -33,7 +38,8 @@ formatting of these NetLabel messages as well as the Generic NETLINK family
names can be found in the 'net/netlabel/' directory as comments in the
header files as well as in 'include/net/netlabel.h'.
- * Security Module API
+Security Module API
+===================
The purpose of the NetLabel security module API is to provide a protocol
independent interface to the underlying NetLabel protocol engines. In addition
diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt
index 638c74f7de7f..026fc267f798 100644
--- a/Documentation/netlabel/lsm_interface.txt
+++ b/Documentation/netlabel/lsm_interface.txt
@@ -1,10 +1,13 @@
+========================================
NetLabel Linux Security Module Interface
-==============================================================================
+========================================
+
Paul Moore, paul.moore@hp.com
May 17, 2006
- * Overview
+Overview
+========
NetLabel is a mechanism which can set and retrieve security attributes from
network packets. It is intended to be used by LSM developers who want to make
@@ -12,7 +15,8 @@ use of a common code base for several different packet labeling protocols.
The NetLabel security module API is defined in 'include/net/netlabel.h' but a
brief overview is given below.
- * NetLabel Security Attributes
+NetLabel Security Attributes
+============================
Since NetLabel supports multiple different packet labeling protocols and LSMs
it uses the concept of security attributes to refer to the packet's security
@@ -24,7 +28,8 @@ configuration. It is up to the LSM developer to translate the NetLabel
security attributes into whatever security identifiers are in use for their
particular LSM.
- * NetLabel LSM Protocol Operations
+NetLabel LSM Protocol Operations
+================================
These are the functions which allow the LSM developer to manipulate the labels
on outgoing packets as well as read the labels on incoming packets. Functions
@@ -32,7 +37,8 @@ exist to operate both on sockets as well as the sk_buffs directly. These high
level functions are translated into low level protocol operations based on how
the administrator has configured the NetLabel subsystem.
- * NetLabel Label Mapping Cache Operations
+NetLabel Label Mapping Cache Operations
+=======================================
Depending on the exact configuration, translation between the network packet
label and the internal LSM security identifier can be time consuming. The
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 23/57] docs: netlabel: convert it to ReST
2019-04-16 2:55 ` [PATCH 23/57] docs: netlabel: convert it " Mauro Carvalho Chehab
@ 2019-04-17 14:36 ` Paul Moore
0 siblings, 0 replies; 5+ messages in thread
From: Paul Moore @ 2019-04-17 14:36 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
Jonathan Corbet, netdev, linux-security-module
On Mon, Apr 15, 2019 at 10:56 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
>
> Convert netlabel documentation to ReST.
>
> This was trivial: just add proper title markups.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
> Documentation/netlabel/cipso_ipv4.txt | 19 +++++++++++++------
> Documentation/netlabel/introduction.txt | 16 +++++++++++-----
> Documentation/netlabel/lsm_interface.txt | 16 +++++++++++-----
> 3 files changed, 35 insertions(+), 16 deletions(-)
Thanks for doing this. I should probably revisit these docs to make
sure they are still valid/correct; if nothing else that email address
is from two employers ago (my apologies to the current email address
holder).
Acked-by: Paul Moore <paul@paul-moore.com>
> diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt
> index a6075481fd60..cbd3f3231221 100644
> --- a/Documentation/netlabel/cipso_ipv4.txt
> +++ b/Documentation/netlabel/cipso_ipv4.txt
> @@ -1,10 +1,13 @@
> +===================================
> NetLabel CIPSO/IPv4 Protocol Engine
> -==============================================================================
> +===================================
> +
> Paul Moore, paul.moore@hp.com
>
> May 17, 2006
>
> - * Overview
> +Overview
> +========
>
> The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial
> IP Security Option (CIPSO) draft from July 16, 1992. A copy of this
> @@ -13,7 +16,8 @@ draft can be found in this directory
> it to an RFC standard it has become a de-facto standard for labeled
> networking and is used in many trusted operating systems.
>
> - * Outbound Packet Processing
> +Outbound Packet Processing
> +==========================
>
> The CIPSO/IPv4 protocol engine applies the CIPSO IP option to packets by
> adding the CIPSO label to the socket. This causes all packets leaving the
> @@ -24,7 +28,8 @@ label by using the NetLabel security module API; if the NetLabel "domain" is
> configured to use CIPSO for packet labeling then a CIPSO IP option will be
> generated and attached to the socket.
>
> - * Inbound Packet Processing
> +Inbound Packet Processing
> +=========================
>
> The CIPSO/IPv4 protocol engine validates every CIPSO IP option it finds at the
> IP layer without any special handling required by the LSM. However, in order
> @@ -33,7 +38,8 @@ NetLabel security module API to extract the security attributes of the packet.
> This is typically done at the socket layer using the 'socket_sock_rcv_skb()'
> LSM hook.
>
> - * Label Translation
> +Label Translation
> +=================
>
> The CIPSO/IPv4 protocol engine contains a mechanism to translate CIPSO security
> attributes such as sensitivity level and category to values which are
> @@ -42,7 +48,8 @@ Domain Of Interpretation (DOI) definition and are configured through the
> NetLabel user space communication layer. Each DOI definition can have a
> different security attribute mapping table.
>
> - * Label Translation Cache
> +Label Translation Cache
> +=======================
>
> The NetLabel system provides a framework for caching security attribute
> mappings from the network labels to the corresponding LSM identifiers. The
> diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt
> index 3caf77bcff0f..9333bbb0adc1 100644
> --- a/Documentation/netlabel/introduction.txt
> +++ b/Documentation/netlabel/introduction.txt
> @@ -1,10 +1,13 @@
> +=====================
> NetLabel Introduction
> -==============================================================================
> +=====================
> +
> Paul Moore, paul.moore@hp.com
>
> August 2, 2006
>
> - * Overview
> +Overview
> +========
>
> NetLabel is a mechanism which can be used by kernel security modules to attach
> security attributes to outgoing network packets generated from user space
> @@ -12,7 +15,8 @@ applications and read security attributes from incoming network packets. It
> is composed of three main components, the protocol engines, the communication
> layer, and the kernel security module API.
>
> - * Protocol Engines
> +Protocol Engines
> +================
>
> The protocol engines are responsible for both applying and retrieving the
> network packet's security attributes. If any translation between the network
> @@ -24,7 +28,8 @@ the NetLabel kernel security module API described below.
> Detailed information about each NetLabel protocol engine can be found in this
> directory.
>
> - * Communication Layer
> +Communication Layer
> +===================
>
> The communication layer exists to allow NetLabel configuration and monitoring
> from user space. The NetLabel communication layer uses a message based
> @@ -33,7 +38,8 @@ formatting of these NetLabel messages as well as the Generic NETLINK family
> names can be found in the 'net/netlabel/' directory as comments in the
> header files as well as in 'include/net/netlabel.h'.
>
> - * Security Module API
> +Security Module API
> +===================
>
> The purpose of the NetLabel security module API is to provide a protocol
> independent interface to the underlying NetLabel protocol engines. In addition
> diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt
> index 638c74f7de7f..026fc267f798 100644
> --- a/Documentation/netlabel/lsm_interface.txt
> +++ b/Documentation/netlabel/lsm_interface.txt
> @@ -1,10 +1,13 @@
> +========================================
> NetLabel Linux Security Module Interface
> -==============================================================================
> +========================================
> +
> Paul Moore, paul.moore@hp.com
>
> May 17, 2006
>
> - * Overview
> +Overview
> +========
>
> NetLabel is a mechanism which can set and retrieve security attributes from
> network packets. It is intended to be used by LSM developers who want to make
> @@ -12,7 +15,8 @@ use of a common code base for several different packet labeling protocols.
> The NetLabel security module API is defined in 'include/net/netlabel.h' but a
> brief overview is given below.
>
> - * NetLabel Security Attributes
> +NetLabel Security Attributes
> +============================
>
> Since NetLabel supports multiple different packet labeling protocols and LSMs
> it uses the concept of security attributes to refer to the packet's security
> @@ -24,7 +28,8 @@ configuration. It is up to the LSM developer to translate the NetLabel
> security attributes into whatever security identifiers are in use for their
> particular LSM.
>
> - * NetLabel LSM Protocol Operations
> +NetLabel LSM Protocol Operations
> +================================
>
> These are the functions which allow the LSM developer to manipulate the labels
> on outgoing packets as well as read the labels on incoming packets. Functions
> @@ -32,7 +37,8 @@ exist to operate both on sockets as well as the sk_buffs directly. These high
> level functions are translated into low level protocol operations based on how
> the administrator has configured the NetLabel subsystem.
>
> - * NetLabel Label Mapping Cache Operations
> +NetLabel Label Mapping Cache Operations
> +=======================================
>
> Depending on the exact configuration, translation between the network packet
> label and the internal LSM security identifier can be time consuming. The
> --
> 2.20.1
>
--
paul moore
www.paul-moore.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files to ReST
2019-04-16 2:55 [PATCH 00/57] Convert files to ReST Mauro Carvalho Chehab
2019-04-16 2:55 ` [PATCH 23/57] docs: netlabel: convert it " Mauro Carvalho Chehab
@ 2019-04-18 12:42 ` Mauro Carvalho Chehab
2019-04-19 22:10 ` Jonathan Corbet
1 sibling, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-18 12:42 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
linux-riscv, linux-fbdev, linux-s390, Greg Kroah-Hartman,
linux-watchdog, xdp-newbies, linux-samsung-soc, linux-acpi,
linux-stm32, bpf, linux-ide, linux-pm, dri-devel, linux-scsi,
linux-gpio, linuxppc-dev, x86, dm-devel, target-devel, netdev,
kexec, linux-fpga, linux-rdma, linux-kbuild, Thomas Gleixner,
linux-security-module, linux-usb, linux-arm-kernel
Jon,
Em Mon, 15 Apr 2019 23:55:25 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> escreveu:
> I have a separate patch series with do the actual rename and
> adjustment of references. I opted to submit this first, as it
> sounds easier to merge this way, as each subsystem maintainer
> can apply the conversion directly on their trees (or at docs
> tree), avoiding merge conflects.
Based on the number of feedbacks we have about this, I'm
considering to submit a second version of my conversion patch
series that would be doing the rename together with each patch,
adding the rst files to an index file.
However, doing that would produce lots of warnings. We have
already lots of those at linux-next:
checking consistency...
docs/Documentation/accelerators/ocxl.rst: WARNING: document isn't included in any toctree
docs/Documentation/admin-guide/mm/numaperf.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/allocators.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/attributes.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/bigalloc.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/bitmaps.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/blockgroup.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/blocks.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/checksums.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/directory.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/eainode.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/group_descr.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/ifork.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/inlinedata.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/inodes.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/journal.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/mmp.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/special_inodes.rst: WARNING: document isn't included in any toctree
docs/Documentation/filesystems/ext4/super.rst: WARNING: document isn't included in any toctree
docs/Documentation/fmc/index.rst: WARNING: document isn't included in any toctree
docs/Documentation/gpu/msm-crash-dump.rst: WARNING: document isn't included in any toctree
docs/Documentation/interconnect/interconnect.rst: WARNING: document isn't included in any toctree
docs/Documentation/laptops/lg-laptop.rst: WARNING: document isn't included in any toctree
docs/Documentation/virtual/kvm/amd-memory-encryption.rst: WARNING: document isn't included in any toctree
docs/Documentation/virtual/kvm/vcpu-requests.rst: WARNING: document isn't included in any toctree
After thinking a little bit and doing some tests, I think a good solution
would be to add ":orphan:" markup to the new .rst files that were not
added yet into the main body (e. g. something like the enclosed example).
That will make Sphinx suppress the:
"WARNING: document isn't included in any toctree"
warning for the new files, while they're not included at the main indexes.
This way, maintainers can do all the hard work of doing/applying the ReST
file conversion/addition patch series on their own trees, and, once
everything gets merged, submit a patch against the latest docs-next
tree, removing the :orphan: tag and add them to the common index.rst
files.
That should largely avoid merging conflicts.
For example, assuming that someone converts the stuff at
Documentation/accounting and rename the text files there to
RST (I'm actually doing that), he could add the enclosed change on
the top of its index file:
diff --git a/Documentation/accounting/index.rst b/Documentation/accounting/index.rst
index e7dda5afa73f..e1f6284b5ff3 100644
--- a/Documentation/accounting/index.rst
+++ b/Documentation/accounting/index.rst
@@ -1,3 +1,5 @@
+:orphan:
+
==========
Accounting
==========
With would make Sphinx to ignore the subdir index file while
reporting errors. It will still build the documentation, allowing
the developer to test the changes.
One of the advantages is that checking the orphaned docs is as
easy as running:
$ git grep -l ":orphan:" Documentation/
...
Documentation/accounting/index.rst
...
Making easy for people to check the orphaned files and send a fixup
patch if something got orphaned after the merge window and send a
fixes patches to be applied upstream.
What do you think?
Regards,
Mauro
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files to ReST
2019-04-18 12:42 ` Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files " Mauro Carvalho Chehab
@ 2019-04-19 22:10 ` Jonathan Corbet
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Corbet @ 2019-04-19 22:10 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
linux-riscv, linux-fbdev, linux-s390, Greg Kroah-Hartman,
linux-watchdog, xdp-newbies, linux-samsung-soc, linux-acpi,
linux-stm32, bpf, linux-ide, linux-pm, dri-devel, linux-scsi,
linux-gpio, linuxppc-dev, x86, dm-devel, target-devel, netdev,
kexec, linux-fpga, linux-rdma, linux-kbuild, Thomas Gleixner,
linux-security-module, linux-usb, linux-arm-kernel
On Thu, 18 Apr 2019 09:42:23 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
> After thinking a little bit and doing some tests, I think a good solution
> would be to add ":orphan:" markup to the new .rst files that were not
> added yet into the main body (e. g. something like the enclosed example).
Interesting...I didn't know about that. Yes, I think it makes sense to
put that in...
jon
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-04-19 22:11 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-16 2:55 [PATCH 00/57] Convert files to ReST Mauro Carvalho Chehab
2019-04-16 2:55 ` [PATCH 23/57] docs: netlabel: convert it " Mauro Carvalho Chehab
2019-04-17 14:36 ` Paul Moore
2019-04-18 12:42 ` Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files " Mauro Carvalho Chehab
2019-04-19 22:10 ` Jonathan Corbet
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).