Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH V2] serial: qcom_geni_serial: To correct QUP Version detection logic
@ 2020-08-11  7:43 Paras Sharma
  2020-08-11  8:23 ` Greg Kroah-Hartman
  2020-08-11 10:50 ` Felipe Balbi
  0 siblings, 2 replies; 4+ messages in thread
From: Paras Sharma @ 2020-08-11  7:43 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Jiri Slaby, linux-arm-msm, linux-serial, linux-kernel, Paras Sharma

The current implementation reduces the sampling rate by half
if qup HW version greater is than 2.5 by checking if the geni
SE major version is greater than 2 and geni SE minor version
is greater than 5.

This implementation fails when the version is 3 or greater.

Hence by adding the another check for geni SE major version,
this problem can be solved.

Signed-off-by: Paras Sharma <parashar@codeaurora.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3aa29d2..a9f92d8 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -995,7 +995,8 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 	sampling_rate = UART_OVERSAMPLING;
 	/* Sampling rate is halved for IP versions >= 2.5 */
 	ver = geni_se_get_qup_hw_version(&port->se);
-	if (GENI_SE_VERSION_MAJOR(ver) >= 2 && GENI_SE_VERSION_MINOR(ver) >= 5)
+	if ((GENI_SE_VERSION_MAJOR(ver) >= 2 && GENI_SE_VERSION_MINOR(ver) >= 5)
+		|| GENI_SE_VERSION_MAJOR(ver) >= 3)
 		sampling_rate /= 2;
 
 	clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-11  7:43 [PATCH V2] serial: qcom_geni_serial: To correct QUP Version detection logic Paras Sharma
2020-08-11  8:23 ` Greg Kroah-Hartman
2020-08-28  8:18   ` Greg Kroah-Hartman
2020-08-11 10:50 ` Felipe Balbi

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git