[PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

The clkoutN names of clocks must be unique because they represent
unique inputs of clock multiplexer.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index 73b56fc5bf58..d8e03716f5d2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -53,8 +53,10 @@ properties:
       List of clock names for particular CLKOUT mux inputs
     minItems: 1
     maxItems: 32
-    items:
-      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+    allOf:
+      - items:
+          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+      - uniqueItems: true
 
   clocks:
     minItems: 1
-- 
2.17.1

[PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

The clkoutN names of clocks must be unique because they represent
unique inputs of clock multiplexer.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index 73b56fc5bf58..d8e03716f5d2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -53,8 +53,10 @@ properties:
       List of clock names for particular CLKOUT mux inputs
     minItems: 1
     maxItems: 32
-    items:
-      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+    allOf:
+      - items:
+          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+      - uniqueItems: true
 
   clocks:
     minItems: 1
-- 
2.17.1

[PATCH 2/3] dt-bindings: gpu: samsung-rotator: Fix indentation

[Krzysztof Kozlowski]

Array elements under 'items' should be indented.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 45ce562435fa..f4dfa6fc724c 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -27,7 +27,7 @@ properties:
 
   clock-names:
     items:
-    - const: rotator
+      - const: rotator
 
 required:
   - compatible
-- 
2.17.1

[PATCH 2/3] dt-bindings: gpu: samsung-rotator: Fix indentation

[Krzysztof Kozlowski]

Array elements under 'items' should be indented.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 45ce562435fa..f4dfa6fc724c 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -27,7 +27,7 @@ properties:
 
   clock-names:
     items:
-    - const: rotator
+      - const: rotator
 
 required:
   - compatible
-- 
2.17.1

[PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema

[Krzysztof Kozlowski]

Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../bindings/mfd/samsung,exynos5433-lpass.txt |   2 +-
 .../bindings/serial/samsung_uart.txt          |  58 -------
 .../bindings/serial/samsung_uart.yaml         | 148 ++++++++++++++++++
 3 files changed, 149 insertions(+), 59 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml

diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
index d759da606f75..30ea27c3936d 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
@@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
 UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
 
 Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.txt
+  ../serial/samsung_uart.yaml
   ../sound/samsung-i2s.txt
   ../dma/arm-pl330.txt
 
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
deleted file mode 100644
index e85f37ec33f0..000000000000
--- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's UART Controller
-
-The Samsung's UART controller is used for interfacing SoC with serial
-communicaion devices.
-
-Required properties:
-- compatible: should be one of following:
-  - "samsung,exynos4210-uart" -  Exynos4210 SoC,
-  - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
-  - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
-  - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
-  - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
-  - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
-
-- reg: base physical address of the controller and length of memory mapped
-  region.
-
-- interrupts: a single interrupt signal to SoC interrupt controller,
-  according to interrupt bindings documentation [1].
-
-- clock-names: input names of clocks used by the controller:
-  - "uart" - controller bus clock,
-  - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
-    according to SoC User's Manual (only N = 0 is allowedfor SoCs without
-    internal baud clock mux).
-- clocks: phandles and specifiers for all clocks specified in "clock-names"
-  property, in the same order, according to clock bindings documentation [2].
-
-[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-- samsung,uart-fifosize: The fifo size supported by the UART channel
-
-Note: Each Samsung UART should have an alias correctly numbered in the
-"aliases" node, according to serialN format, where N is the port number
-(non-negative decimal integer) as specified by User's Manual of respective
-SoC.
-
-Example:
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-Example:
-	uart1: serial@7f005400 {
-		compatible = "samsung,s3c6400-uart";
-		reg = <0x7f005400 0x100>;
-		interrupt-parent = <&vic1>;
-		interrupts = <6>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-				<&clocks SCLK_UART>;
-		samsung,uart-fifosize = <16>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
new file mode 100644
index 000000000000..276bea1c231a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC UART Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+  Each Samsung UART should have an alias correctly numbered in the "aliases"
+  node, according to serialN format, where N is the port number (non-negative
+  decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,s3c2410-uart
+          - samsung,s3c2412-uart
+          - samsung,s3c2440-uart
+          - samsung,s3c6400-uart
+          - samsung,s5pv210-uart
+          - samsung,exynos4210-uart
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    description: |
+      List of clock names:
+        - "uart" - controller bus clock,
+        - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).
+      N = 0 is allowed for SoCs without internal baud clock mux.
+    minItems: 2
+    maxItems: 5
+    allOf:
+      - uniqueItems: true
+      - oneOf:
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  samsung,uart-fifosize:
+    description: The fifo size supported by the UART channel
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [16, 64, 256]
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-uart
+              - samsung,s5pv210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          maxItems: 3
+          allOf:
+            - uniqueItems: true
+            - oneOf:
+                - items:
+                    - const: uart
+                    - pattern: '^clk_uart_baud[0-1]$'
+                - items:
+                    - const: uart
+                    - pattern: '^clk_uart_baud[0-1]$'
+                    - pattern: '^clk_uart_baud[0-1]$'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+          allOf:
+            - uniqueItems: true
+            - items:
+                - const: uart
+                - const: clk_uart_baud0
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+    aliases {
+        serial0 = &uart0;
+    };
+
+    uart0: serial@7f005000 {
+        compatible = "samsung,s3c6400-uart";
+        reg = <0x7f005000 0x100>;
+        interrupt-parent = <&vic1>;
+        interrupts = <5>;
+        clock-names = "uart", "clk_uart_baud2",
+                      "clk_uart_baud3";
+        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+                 <&clocks SCLK_UART>;
+        samsung,uart-fifosize = <16>;
+    };
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema

[Krzysztof Kozlowski]

Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../bindings/mfd/samsung,exynos5433-lpass.txt |   2 +-
 .../bindings/serial/samsung_uart.txt          |  58 -------
 .../bindings/serial/samsung_uart.yaml         | 148 ++++++++++++++++++
 3 files changed, 149 insertions(+), 59 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml

diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
index d759da606f75..30ea27c3936d 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
@@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
 UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
 
 Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.txt
+  ../serial/samsung_uart.yaml
   ../sound/samsung-i2s.txt
   ../dma/arm-pl330.txt
 
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
deleted file mode 100644
index e85f37ec33f0..000000000000
--- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's UART Controller
-
-The Samsung's UART controller is used for interfacing SoC with serial
-communicaion devices.
-
-Required properties:
-- compatible: should be one of following:
-  - "samsung,exynos4210-uart" -  Exynos4210 SoC,
-  - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
-  - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
-  - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
-  - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
-  - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
-
-- reg: base physical address of the controller and length of memory mapped
-  region.
-
-- interrupts: a single interrupt signal to SoC interrupt controller,
-  according to interrupt bindings documentation [1].
-
-- clock-names: input names of clocks used by the controller:
-  - "uart" - controller bus clock,
-  - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
-    according to SoC User's Manual (only N = 0 is allowedfor SoCs without
-    internal baud clock mux).
-- clocks: phandles and specifiers for all clocks specified in "clock-names"
-  property, in the same order, according to clock bindings documentation [2].
-
-[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-- samsung,uart-fifosize: The fifo size supported by the UART channel
-
-Note: Each Samsung UART should have an alias correctly numbered in the
-"aliases" node, according to serialN format, where N is the port number
-(non-negative decimal integer) as specified by User's Manual of respective
-SoC.
-
-Example:
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-Example:
-	uart1: serial@7f005400 {
-		compatible = "samsung,s3c6400-uart";
-		reg = <0x7f005400 0x100>;
-		interrupt-parent = <&vic1>;
-		interrupts = <6>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-				<&clocks SCLK_UART>;
-		samsung,uart-fifosize = <16>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
new file mode 100644
index 000000000000..276bea1c231a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC UART Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+  Each Samsung UART should have an alias correctly numbered in the "aliases"
+  node, according to serialN format, where N is the port number (non-negative
+  decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,s3c2410-uart
+          - samsung,s3c2412-uart
+          - samsung,s3c2440-uart
+          - samsung,s3c6400-uart
+          - samsung,s5pv210-uart
+          - samsung,exynos4210-uart
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    description: |
+      List of clock names:
+        - "uart" - controller bus clock,
+        - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).
+      N = 0 is allowed for SoCs without internal baud clock mux.
+    minItems: 2
+    maxItems: 5
+    allOf:
+      - uniqueItems: true
+      - oneOf:
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+          - items:
+              - const: uart
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+              - pattern: '^clk_uart_baud[0-3]$'
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  samsung,uart-fifosize:
+    description: The fifo size supported by the UART channel
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [16, 64, 256]
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-uart
+              - samsung,s5pv210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          maxItems: 3
+          allOf:
+            - uniqueItems: true
+            - oneOf:
+                - items:
+                    - const: uart
+                    - pattern: '^clk_uart_baud[0-1]$'
+                - items:
+                    - const: uart
+                    - pattern: '^clk_uart_baud[0-1]$'
+                    - pattern: '^clk_uart_baud[0-1]$'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+          allOf:
+            - uniqueItems: true
+            - items:
+                - const: uart
+                - const: clk_uart_baud0
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+    aliases {
+        serial0 = &uart0;
+    };
+
+    uart0: serial@7f005000 {
+        compatible = "samsung,s3c6400-uart";
+        reg = <0x7f005000 0x100>;
+        interrupt-parent = <&vic1>;
+        interrupts = <5>;
+        clock-names = "uart", "clk_uart_baud2",
+                      "clk_uart_baud3";
+        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+                 <&clocks SCLK_UART>;
+        samsung,uart-fifosize = <16>;
+    };
-- 
2.17.1

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> The clkoutN names of clocks must be unique because they represent
> unique inputs of clock multiplexer.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> index 73b56fc5bf58..d8e03716f5d2 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -53,8 +53,10 @@ properties:
>        List of clock names for particular CLKOUT mux inputs
>      minItems: 1
>      maxItems: 32
> -    items:
> -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> +    allOf:
> +      - items:
> +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> +      - uniqueItems: true

You shouldn't need the 'allOf', just add uniqueItems at the same level as items.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> The clkoutN names of clocks must be unique because they represent
> unique inputs of clock multiplexer.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> index 73b56fc5bf58..d8e03716f5d2 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -53,8 +53,10 @@ properties:
>        List of clock names for particular CLKOUT mux inputs
>      minItems: 1
>      maxItems: 32
> -    items:
> -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> +    allOf:
> +      - items:
> +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> +      - uniqueItems: true

You shouldn't need the 'allOf', just add uniqueItems at the same level as items.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > The clkoutN names of clocks must be unique because they represent
> > unique inputs of clock multiplexer.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > index 73b56fc5bf58..d8e03716f5d2 100644
> > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > @@ -53,8 +53,10 @@ properties:
> >        List of clock names for particular CLKOUT mux inputs
> >      minItems: 1
> >      maxItems: 32
> > -    items:
> > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > +    allOf:
> > +      - items:
> > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > +      - uniqueItems: true
> 
> You shouldn't need the 'allOf', just add uniqueItems at the same level as items.

If you mean something like:
  56     uniqueItems: true
  57     items:
  58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'

Then the dt_binding_check fails:

dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']

Best regards,
Krzysztof


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > The clkoutN names of clocks must be unique because they represent
> > unique inputs of clock multiplexer.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > index 73b56fc5bf58..d8e03716f5d2 100644
> > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > @@ -53,8 +53,10 @@ properties:
> >        List of clock names for particular CLKOUT mux inputs
> >      minItems: 1
> >      maxItems: 32
> > -    items:
> > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > +    allOf:
> > +      - items:
> > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > +      - uniqueItems: true
> 
> You shouldn't need the 'allOf', just add uniqueItems at the same level as items.

If you mean something like:
  56     uniqueItems: true
  57     items:
  58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'

Then the dt_binding_check fails:

dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']

Best regards,
Krzysztof

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > >
> > > The clkoutN names of clocks must be unique because they represent
> > > unique inputs of clock multiplexer.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > ---
> > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > @@ -53,8 +53,10 @@ properties:
> > >        List of clock names for particular CLKOUT mux inputs
> > >      minItems: 1
> > >      maxItems: 32
> > > -    items:
> > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > +    allOf:
> > > +      - items:
> > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > +      - uniqueItems: true
> >
> > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
>
> If you mean something like:
>   56     uniqueItems: true
>   57     items:
>   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
>
> Then the dt_binding_check fails:
>
> dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']

I can add it.

The other option is to fix this in the clock schema. I'm not sure if
there's a need for duplicate clock-names. Seems unlikely. I'll test
that.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > >
> > > The clkoutN names of clocks must be unique because they represent
> > > unique inputs of clock multiplexer.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > ---
> > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > @@ -53,8 +53,10 @@ properties:
> > >        List of clock names for particular CLKOUT mux inputs
> > >      minItems: 1
> > >      maxItems: 32
> > > -    items:
> > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > +    allOf:
> > > +      - items:
> > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > +      - uniqueItems: true
> >
> > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
>
> If you mean something like:
>   56     uniqueItems: true
>   57     items:
>   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
>
> Then the dt_binding_check fails:
>
> dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']

I can add it.

The other option is to fix this in the clock schema. I'm not sure if
there's a need for duplicate clock-names. Seems unlikely. I'll test
that.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > >
> > > > The clkoutN names of clocks must be unique because they represent
> > > > unique inputs of clock multiplexer.
> > > >
> > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > ---
> > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > @@ -53,8 +53,10 @@ properties:
> > > >        List of clock names for particular CLKOUT mux inputs
> > > >      minItems: 1
> > > >      maxItems: 32
> > > > -    items:
> > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > +    allOf:
> > > > +      - items:
> > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > +      - uniqueItems: true
> > >
> > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> >
> > If you mean something like:
> >   56     uniqueItems: true
> >   57     items:
> >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> >
> > Then the dt_binding_check fails:
> >
> > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
>
> I can add it.
>
> The other option is to fix this in the clock schema. I'm not sure if
> there's a need for duplicate clock-names. Seems unlikely. I'll test
> that.

Actually, clock-names is already set to be unique. Did you see otherwise?

Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > >
> > > > The clkoutN names of clocks must be unique because they represent
> > > > unique inputs of clock multiplexer.
> > > >
> > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > ---
> > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > @@ -53,8 +53,10 @@ properties:
> > > >        List of clock names for particular CLKOUT mux inputs
> > > >      minItems: 1
> > > >      maxItems: 32
> > > > -    items:
> > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > +    allOf:
> > > > +      - items:
> > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > +      - uniqueItems: true
> > >
> > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> >
> > If you mean something like:
> >   56     uniqueItems: true
> >   57     items:
> >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> >
> > Then the dt_binding_check fails:
> >
> > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
>
> I can add it.
>
> The other option is to fix this in the clock schema. I'm not sure if
> there's a need for duplicate clock-names. Seems unlikely. I'll test
> that.

Actually, clock-names is already set to be unique. Did you see otherwise?

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 09:17:16AM -0500, Rob Herring wrote:
> On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > >
> > > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > >
> > > > > The clkoutN names of clocks must be unique because they represent
> > > > > unique inputs of clock multiplexer.
> > > > >
> > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > ---
> > > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > @@ -53,8 +53,10 @@ properties:
> > > > >        List of clock names for particular CLKOUT mux inputs
> > > > >      minItems: 1
> > > > >      maxItems: 32
> > > > > -    items:
> > > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > +    allOf:
> > > > > +      - items:
> > > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > +      - uniqueItems: true
> > > >
> > > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> > >
> > > If you mean something like:
> > >   56     uniqueItems: true
> > >   57     items:
> > >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > >
> > > Then the dt_binding_check fails:
> > >
> > > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
> >
> > I can add it.
> >
> > The other option is to fix this in the clock schema. I'm not sure if
> > there's a need for duplicate clock-names. Seems unlikely. I'll test
> > that.
> 
> Actually, clock-names is already set to be unique. Did you see otherwise?

Yeah, I duplicated on purpose "clkout1" and it was not reported as an
error. That's why I added "uniqueItems".

Best regards,
Krzysztof

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 09:17:16AM -0500, Rob Herring wrote:
> On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > >
> > > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > >
> > > > > The clkoutN names of clocks must be unique because they represent
> > > > > unique inputs of clock multiplexer.
> > > > >
> > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > ---
> > > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > @@ -53,8 +53,10 @@ properties:
> > > > >        List of clock names for particular CLKOUT mux inputs
> > > > >      minItems: 1
> > > > >      maxItems: 32
> > > > > -    items:
> > > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > +    allOf:
> > > > > +      - items:
> > > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > +      - uniqueItems: true
> > > >
> > > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> > >
> > > If you mean something like:
> > >   56     uniqueItems: true
> > >   57     items:
> > >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > >
> > > Then the dt_binding_check fails:
> > >
> > > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
> >
> > I can add it.
> >
> > The other option is to fix this in the clock schema. I'm not sure if
> > there's a need for duplicate clock-names. Seems unlikely. I'll test
> > that.
> 
> Actually, clock-names is already set to be unique. Did you see otherwise?

Yeah, I duplicated on purpose "clkout1" and it was not reported as an
error. That's why I added "uniqueItems".

Best regards,
Krzysztof

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 9:29 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Oct 08, 2019 at 09:17:16AM -0500, Rob Herring wrote:
> > On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
> > >
> > > On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > >
> > > > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > > >
> > > > > > The clkoutN names of clocks must be unique because they represent
> > > > > > unique inputs of clock multiplexer.
> > > > > >
> > > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > > ---
> > > > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > @@ -53,8 +53,10 @@ properties:
> > > > > >        List of clock names for particular CLKOUT mux inputs
> > > > > >      minItems: 1
> > > > > >      maxItems: 32
> > > > > > -    items:
> > > > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > > +    allOf:
> > > > > > +      - items:
> > > > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > > +      - uniqueItems: true
> > > > >
> > > > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> > > >
> > > > If you mean something like:
> > > >   56     uniqueItems: true
> > > >   57     items:
> > > >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > >
> > > > Then the dt_binding_check fails:
> > > >
> > > > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > > > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
> > >
> > > I can add it.
> > >
> > > The other option is to fix this in the clock schema. I'm not sure if
> > > there's a need for duplicate clock-names. Seems unlikely. I'll test
> > > that.
> >
> > Actually, clock-names is already set to be unique. Did you see otherwise?
>
> Yeah, I duplicated on purpose "clkout1" and it was not reported as an
> error. That's why I added "uniqueItems".

Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Rob Herring]

On Tue, Oct 8, 2019 at 9:29 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Oct 08, 2019 at 09:17:16AM -0500, Rob Herring wrote:
> > On Tue, Oct 8, 2019 at 9:05 AM Rob Herring <robh+dt@kernel.org> wrote:
> > >
> > > On Tue, Oct 8, 2019 at 7:50 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > >
> > > > On Tue, Oct 08, 2019 at 07:38:14AM -0500, Rob Herring wrote:
> > > > > On Fri, Oct 4, 2019 at 10:14 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > > >
> > > > > > The clkoutN names of clocks must be unique because they represent
> > > > > > unique inputs of clock multiplexer.
> > > > > >
> > > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > > > > ---
> > > > > >  Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 6 ++++--
> > > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > index 73b56fc5bf58..d8e03716f5d2 100644
> > > > > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > > > > > @@ -53,8 +53,10 @@ properties:
> > > > > >        List of clock names for particular CLKOUT mux inputs
> > > > > >      minItems: 1
> > > > > >      maxItems: 32
> > > > > > -    items:
> > > > > > -      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > > +    allOf:
> > > > > > +      - items:
> > > > > > +          pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > > > > +      - uniqueItems: true
> > > > >
> > > > > You shouldn't need the 'allOf', just add uniqueItems at the same level as items.
> > > >
> > > > If you mean something like:
> > > >   56     uniqueItems: true
> > > >   57     items:
> > > >   58       pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> > > >
> > > > Then the dt_binding_check fails:
> > > >
> > > > dev/linux/Documentation/devicetree/bindings/arm/samsung/pmu.yaml: properties:clock-names:
> > > > 'uniqueItems' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties']
> > >
> > > I can add it.
> > >
> > > The other option is to fix this in the clock schema. I'm not sure if
> > > there's a need for duplicate clock-names. Seems unlikely. I'll test
> > > that.
> >
> > Actually, clock-names is already set to be unique. Did you see otherwise?
>
> Yeah, I duplicated on purpose "clkout1" and it was not reported as an
> error. That's why I added "uniqueItems".

Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.

Rob

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 09:38:15AM -0500, Rob Herring wrote:
> Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.

Ah, yes, now I see proper errors. Thanks for pointing this.

I'll send next version of this patch only (if others are ok).

Best regards,
Krzysztof

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 09:38:15AM -0500, Rob Herring wrote:
> Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.

Ah, yes, now I see proper errors. Thanks for pointing this.

I'll send next version of this patch only (if others are ok).

Best regards,
Krzysztof

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 05:04:56PM +0200, Krzysztof Kozlowski wrote:
> On Tue, Oct 08, 2019 at 09:38:15AM -0500, Rob Herring wrote:
> > Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.
> 
> Ah, yes, now I see proper errors. Thanks for pointing this.
> 
> I'll send next version of this patch only (if others are ok).
> 

Of course, there will be no v2, this patch can be just skipped.

Best regards,
Krzysztof

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] dt-bindings: arm: samsung: Force clkoutN names to be unique in PMU

[Krzysztof Kozlowski]

On Tue, Oct 08, 2019 at 05:04:56PM +0200, Krzysztof Kozlowski wrote:
> On Tue, Oct 08, 2019 at 09:38:15AM -0500, Rob Herring wrote:
> > Are you running using DT_SCHEMA_FILES? If so, you won't get the core schema.
> 
> Ah, yes, now I see proper errors. Thanks for pointing this.
> 
> I'll send next version of this patch only (if others are ok).
> 

Of course, there will be no v2, this patch can be just skipped.

Best regards,
Krzysztof

Re: [PATCH 2/3] dt-bindings: gpu: samsung-rotator: Fix indentation

[Rob Herring]

On Fri,  4 Oct 2019 17:14:13 +0200, Krzysztof Kozlowski wrote:
> Array elements under 'items' should be indented.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied, thanks.

Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/3] dt-bindings: gpu: samsung-rotator: Fix indentation

[Rob Herring]

On Fri,  4 Oct 2019 17:14:13 +0200, Krzysztof Kozlowski wrote:
> Array elements under 'items' should be indented.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied, thanks.

Rob

Re: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema

[Rob Herring]

On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
> using json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  .../bindings/mfd/samsung,exynos5433-lpass.txt |   2 +-
>  .../bindings/serial/samsung_uart.txt          |  58 -------
>  .../bindings/serial/samsung_uart.yaml         | 148 ++++++++++++++++++
>  3 files changed, 149 insertions(+), 59 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> index d759da606f75..30ea27c3936d 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
>  UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
>  
>  Bindings of the sub-nodes are described in:
> -  ../serial/samsung_uart.txt
> +  ../serial/samsung_uart.yaml
>    ../sound/samsung-i2s.txt
>    ../dma/arm-pl330.txt
>  
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
> deleted file mode 100644
> index e85f37ec33f0..000000000000
> --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Samsung's UART Controller
> -
> -The Samsung's UART controller is used for interfacing SoC with serial
> -communicaion devices.
> -
> -Required properties:
> -- compatible: should be one of following:
> -  - "samsung,exynos4210-uart" -  Exynos4210 SoC,
> -  - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
> -  - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
> -  - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
> -  - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
> -  - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
> -
> -- reg: base physical address of the controller and length of memory mapped
> -  region.
> -
> -- interrupts: a single interrupt signal to SoC interrupt controller,
> -  according to interrupt bindings documentation [1].
> -
> -- clock-names: input names of clocks used by the controller:
> -  - "uart" - controller bus clock,
> -  - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
> -    according to SoC User's Manual (only N = 0 is allowedfor SoCs without
> -    internal baud clock mux).
> -- clocks: phandles and specifiers for all clocks specified in "clock-names"
> -  property, in the same order, according to clock bindings documentation [2].
> -
> -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Optional properties:
> -- samsung,uart-fifosize: The fifo size supported by the UART channel
> -
> -Note: Each Samsung UART should have an alias correctly numbered in the
> -"aliases" node, according to serialN format, where N is the port number
> -(non-negative decimal integer) as specified by User's Manual of respective
> -SoC.
> -
> -Example:
> -	aliases {
> -		serial0 = &uart0;
> -		serial1 = &uart1;
> -		serial2 = &uart2;
> -	};
> -
> -Example:
> -	uart1: serial@7f005400 {
> -		compatible = "samsung,s3c6400-uart";
> -		reg = <0x7f005400 0x100>;
> -		interrupt-parent = <&vic1>;
> -		interrupts = <6>;
> -		clock-names = "uart", "clk_uart_baud2",
> -				"clk_uart_baud3";
> -		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
> -				<&clocks SCLK_UART>;
> -		samsung,uart-fifosize = <16>;
> -	};
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> new file mode 100644
> index 000000000000..276bea1c231a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C, S5P and Exynos SoC UART Controller
> +
> +maintainers:
> +  - Krzysztof Kozlowski <krzk@kernel.org>
> +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> +
> +description: |+
> +  Each Samsung UART should have an alias correctly numbered in the "aliases"
> +  node, according to serialN format, where N is the port number (non-negative
> +  decimal integer) as specified by User's Manual of respective SoC.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - samsung,s3c2410-uart
> +          - samsung,s3c2412-uart
> +          - samsung,s3c2440-uart
> +          - samsung,s3c6400-uart
> +          - samsung,s5pv210-uart
> +          - samsung,exynos4210-uart
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 5
> +
> +  clock-names:
> +    description: |
> +      List of clock names:
> +        - "uart" - controller bus clock,
> +        - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).

Kind of redundant to list this here.

> +      N = 0 is allowed for SoCs without internal baud clock mux.

You can add a description with the item:

items:
  - pattern: '^clk_uart_baud[0-3]$'
    description: N = 0 is allowed for SoCs without internal baud clock mux.

Or leave it here is fine too.

> +    minItems: 2
> +    maxItems: 5
> +    allOf:
> +      - uniqueItems: true

You can drop this.

> +      - oneOf:
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'

You only need the last case. With 'minItems: 2', the additional items 
here will just be ignored.

> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2

What is each item?

> +
> +  samsung,uart-fifosize:
> +    description: The fifo size supported by the UART channel
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [16, 64, 256]
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - reg
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,s3c2410-uart
> +              - samsung,s5pv210-uart
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 3
> +        clock-names:
> +          minItems: 2
> +          maxItems: 3
> +          allOf:
> +            - uniqueItems: true
> +            - oneOf:
> +                - items:
> +                    - const: uart
> +                    - pattern: '^clk_uart_baud[0-1]$'
> +                - items:
> +                    - const: uart
> +                    - pattern: '^clk_uart_baud[0-1]$'
> +                    - pattern: '^clk_uart_baud[0-1]$'

Similar simplification can be done here.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,exynos4210-uart
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +        clock-names:
> +          minItems: 2
> +          maxItems: 2
> +          allOf:
> +            - uniqueItems: true
> +            - items:
> +                - const: uart
> +                - const: clk_uart_baud0
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
> +
> +    aliases {
> +        serial0 = &uart0;
> +    };

Drop this. It will cause a warning if we enforce 'aliases' to be at the 
root node.

> +
> +    uart0: serial@7f005000 {
> +        compatible = "samsung,s3c6400-uart";
> +        reg = <0x7f005000 0x100>;
> +        interrupt-parent = <&vic1>;
> +        interrupts = <5>;
> +        clock-names = "uart", "clk_uart_baud2",
> +                      "clk_uart_baud3";
> +        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
> +                 <&clocks SCLK_UART>;
> +        samsung,uart-fifosize = <16>;
> +    };
> -- 
> 2.17.1
> 

Re: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema

[Rob Herring]

On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
> using json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  .../bindings/mfd/samsung,exynos5433-lpass.txt |   2 +-
>  .../bindings/serial/samsung_uart.txt          |  58 -------
>  .../bindings/serial/samsung_uart.yaml         | 148 ++++++++++++++++++
>  3 files changed, 149 insertions(+), 59 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> index d759da606f75..30ea27c3936d 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
>  UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
>  
>  Bindings of the sub-nodes are described in:
> -  ../serial/samsung_uart.txt
> +  ../serial/samsung_uart.yaml
>    ../sound/samsung-i2s.txt
>    ../dma/arm-pl330.txt
>  
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
> deleted file mode 100644
> index e85f37ec33f0..000000000000
> --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Samsung's UART Controller
> -
> -The Samsung's UART controller is used for interfacing SoC with serial
> -communicaion devices.
> -
> -Required properties:
> -- compatible: should be one of following:
> -  - "samsung,exynos4210-uart" -  Exynos4210 SoC,
> -  - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
> -  - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
> -  - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
> -  - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
> -  - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
> -
> -- reg: base physical address of the controller and length of memory mapped
> -  region.
> -
> -- interrupts: a single interrupt signal to SoC interrupt controller,
> -  according to interrupt bindings documentation [1].
> -
> -- clock-names: input names of clocks used by the controller:
> -  - "uart" - controller bus clock,
> -  - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
> -    according to SoC User's Manual (only N = 0 is allowedfor SoCs without
> -    internal baud clock mux).
> -- clocks: phandles and specifiers for all clocks specified in "clock-names"
> -  property, in the same order, according to clock bindings documentation [2].
> -
> -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Optional properties:
> -- samsung,uart-fifosize: The fifo size supported by the UART channel
> -
> -Note: Each Samsung UART should have an alias correctly numbered in the
> -"aliases" node, according to serialN format, where N is the port number
> -(non-negative decimal integer) as specified by User's Manual of respective
> -SoC.
> -
> -Example:
> -	aliases {
> -		serial0 = &uart0;
> -		serial1 = &uart1;
> -		serial2 = &uart2;
> -	};
> -
> -Example:
> -	uart1: serial@7f005400 {
> -		compatible = "samsung,s3c6400-uart";
> -		reg = <0x7f005400 0x100>;
> -		interrupt-parent = <&vic1>;
> -		interrupts = <6>;
> -		clock-names = "uart", "clk_uart_baud2",
> -				"clk_uart_baud3";
> -		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
> -				<&clocks SCLK_UART>;
> -		samsung,uart-fifosize = <16>;
> -	};
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> new file mode 100644
> index 000000000000..276bea1c231a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C, S5P and Exynos SoC UART Controller
> +
> +maintainers:
> +  - Krzysztof Kozlowski <krzk@kernel.org>
> +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> +
> +description: |+
> +  Each Samsung UART should have an alias correctly numbered in the "aliases"
> +  node, according to serialN format, where N is the port number (non-negative
> +  decimal integer) as specified by User's Manual of respective SoC.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - samsung,s3c2410-uart
> +          - samsung,s3c2412-uart
> +          - samsung,s3c2440-uart
> +          - samsung,s3c6400-uart
> +          - samsung,s5pv210-uart
> +          - samsung,exynos4210-uart
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 5
> +
> +  clock-names:
> +    description: |
> +      List of clock names:
> +        - "uart" - controller bus clock,
> +        - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).

Kind of redundant to list this here.

> +      N = 0 is allowed for SoCs without internal baud clock mux.

You can add a description with the item:

items:
  - pattern: '^clk_uart_baud[0-3]$'
    description: N = 0 is allowed for SoCs without internal baud clock mux.

Or leave it here is fine too.

> +    minItems: 2
> +    maxItems: 5
> +    allOf:
> +      - uniqueItems: true

You can drop this.

> +      - oneOf:
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +          - items:
> +              - const: uart
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'
> +              - pattern: '^clk_uart_baud[0-3]$'

You only need the last case. With 'minItems: 2', the additional items 
here will just be ignored.

> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2

What is each item?

> +
> +  samsung,uart-fifosize:
> +    description: The fifo size supported by the UART channel
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [16, 64, 256]
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - reg
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,s3c2410-uart
> +              - samsung,s5pv210-uart
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 3
> +        clock-names:
> +          minItems: 2
> +          maxItems: 3
> +          allOf:
> +            - uniqueItems: true
> +            - oneOf:
> +                - items:
> +                    - const: uart
> +                    - pattern: '^clk_uart_baud[0-1]$'
> +                - items:
> +                    - const: uart
> +                    - pattern: '^clk_uart_baud[0-1]$'
> +                    - pattern: '^clk_uart_baud[0-1]$'

Similar simplification can be done here.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,exynos4210-uart
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +        clock-names:
> +          minItems: 2
> +          maxItems: 2
> +          allOf:
> +            - uniqueItems: true
> +            - items:
> +                - const: uart
> +                - const: clk_uart_baud0
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
> +
> +    aliases {
> +        serial0 = &uart0;
> +    };

Drop this. It will cause a warning if we enforce 'aliases' to be at the 
root node.

> +
> +    uart0: serial@7f005000 {
> +        compatible = "samsung,s3c6400-uart";
> +        reg = <0x7f005000 0x100>;
> +        interrupt-parent = <&vic1>;
> +        interrupts = <5>;
> +        clock-names = "uart", "clk_uart_baud2",
> +                      "clk_uart_baud3";
> +        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
> +                 <&clocks SCLK_UART>;
> +        samsung,uart-fifosize = <16>;
> +    };
> -- 
> 2.17.1
> 

Re: [PATCH 3/3] dt-bindings: serial: Convert Samsung UART bindings to json-schema

[Krzysztof Kozlowski]

On Tue, Oct 15, 2019 at 02:40:06PM -0500, Rob Herring wrote:
> On Fri, Oct 04, 2019 at 05:14:14PM +0200, Krzysztof Kozlowski wrote:
> > Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
> > using json-schema.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> >  .../bindings/mfd/samsung,exynos5433-lpass.txt |   2 +-
> >  .../bindings/serial/samsung_uart.txt          |  58 -------
> >  .../bindings/serial/samsung_uart.yaml         | 148 ++++++++++++++++++
> >  3 files changed, 149 insertions(+), 59 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt
> >  create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > index d759da606f75..30ea27c3936d 100644
> > --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> > @@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
> >  UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
> >  
> >  Bindings of the sub-nodes are described in:
> > -  ../serial/samsung_uart.txt
> > +  ../serial/samsung_uart.yaml
> >    ../sound/samsung-i2s.txt
> >    ../dma/arm-pl330.txt
> >  
> > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
> > deleted file mode 100644
> > index e85f37ec33f0..000000000000
> > --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -* Samsung's UART Controller
> > -
> > -The Samsung's UART controller is used for interfacing SoC with serial
> > -communicaion devices.
> > -
> > -Required properties:
> > -- compatible: should be one of following:
> > -  - "samsung,exynos4210-uart" -  Exynos4210 SoC,
> > -  - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
> > -  - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
> > -  - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
> > -  - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
> > -  - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
> > -
> > -- reg: base physical address of the controller and length of memory mapped
> > -  region.
> > -
> > -- interrupts: a single interrupt signal to SoC interrupt controller,
> > -  according to interrupt bindings documentation [1].
> > -
> > -- clock-names: input names of clocks used by the controller:
> > -  - "uart" - controller bus clock,
> > -  - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
> > -    according to SoC User's Manual (only N = 0 is allowedfor SoCs without
> > -    internal baud clock mux).
> > -- clocks: phandles and specifiers for all clocks specified in "clock-names"
> > -  property, in the same order, according to clock bindings documentation [2].
> > -
> > -[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> > -[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> > -
> > -Optional properties:
> > -- samsung,uart-fifosize: The fifo size supported by the UART channel
> > -
> > -Note: Each Samsung UART should have an alias correctly numbered in the
> > -"aliases" node, according to serialN format, where N is the port number
> > -(non-negative decimal integer) as specified by User's Manual of respective
> > -SoC.
> > -
> > -Example:
> > -	aliases {
> > -		serial0 = &uart0;
> > -		serial1 = &uart1;
> > -		serial2 = &uart2;
> > -	};
> > -
> > -Example:
> > -	uart1: serial@7f005400 {
> > -		compatible = "samsung,s3c6400-uart";
> > -		reg = <0x7f005400 0x100>;
> > -		interrupt-parent = <&vic1>;
> > -		interrupts = <6>;
> > -		clock-names = "uart", "clk_uart_baud2",
> > -				"clk_uart_baud3";
> > -		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
> > -				<&clocks SCLK_UART>;
> > -		samsung,uart-fifosize = <16>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> > new file mode 100644
> > index 000000000000..276bea1c231a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> > @@ -0,0 +1,148 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung S3C, S5P and Exynos SoC UART Controller
> > +
> > +maintainers:
> > +  - Krzysztof Kozlowski <krzk@kernel.org>
> > +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > +
> > +description: |+
> > +  Each Samsung UART should have an alias correctly numbered in the "aliases"
> > +  node, according to serialN format, where N is the port number (non-negative
> > +  decimal integer) as specified by User's Manual of respective SoC.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - samsung,s3c2410-uart
> > +          - samsung,s3c2412-uart
> > +          - samsung,s3c2440-uart
> > +          - samsung,s3c6400-uart
> > +          - samsung,s5pv210-uart
> > +          - samsung,exynos4210-uart
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 2
> > +    maxItems: 5
> > +
> > +  clock-names:
> > +    description: |
> > +      List of clock names:
> > +        - "uart" - controller bus clock,
> > +        - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...).
> 
> Kind of redundant to list this here.
> 
> > +      N = 0 is allowed for SoCs without internal baud clock mux.
> 
> You can add a description with the item:
> 
> items:
>   - pattern: '^clk_uart_baud[0-3]$'
>     description: N = 0 is allowed for SoCs without internal baud clock mux.
> 

This caused error:
properties:clock-names:items:1: Additional properties are not allowed ('description' was unexpected)
../Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/serial/samsung_uart.example.dts' failed

I applied rest of comments. Thanks for review!

Best regards,
Krzysztof