Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Paul Burton <paulburton@kernel.org>,
	Ralf Baechle <ralf@linux-mips.org>, Arnd Bergmann <arnd@arndb.de>,
	Long Cheng <long.cheng@mediatek.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	<linux-mips@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Lukas Wunner <lukas@wunner.de>, Stefan Roese <sr@denx.de>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Allison Randal <allison@lohutok.net>,
	Yegor Yefremov <yegorslists@googlemail.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Dmitry Safonov <0x7f454c46@gmail.com>,
	<linux-serial@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 2/4] serial: 8250: Add 8250 port clock update method
Date: Thu, 7 May 2020 02:31:33 +0300
Message-ID: <20200506233136.11842-3-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200506233136.11842-1-Sergey.Semin@baikalelectronics.ru>

Some platforms can be designed in a way so the UART port reference clock
might be asynchronously changed at some point. In Baikal-T1 SoC this may
happen due to the reference clock being shared between two UART ports, on
the Allwinner SoC the reference clock is derived from the CPU clock, so
any CPU frequency change should get to be known/reflected by/in the UART
controller as well. But it's not enough to just update the
uart_port->uartclk field of the corresponding UART port, the 8250
controller reference clock divisor should be altered so to preserve
current baud rate setting. All of these things is done in a coherent
way by calling the serial8250_update_uartclk() method provided in this
patch. Though note that it isn't supposed to be called from within the
UART port callbacks because the locks using to the protect the UART port
data are already taken in there.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Long Cheng <long.cheng@mediatek.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
---
 drivers/tty/serial/8250/8250_port.c | 38 +++++++++++++++++++++++++++++
 include/linux/serial_8250.h         |  2 ++
 2 files changed, 40 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 4d83c85a7389..484ff9df1432 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2628,6 +2628,44 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 				  (port->uartclk + tolerance) / 16);
 }
 
+/*
+ * Note in order to avoid the tty port mutex deadlock don't use the next method
+ * within the uart port callbacks. Primarily it's supposed to be utilized to
+ * handle a sudden reference clock rate change.
+ */
+void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+	unsigned int baud, quot, frac = 0;
+	struct ktermios *termios;
+	unsigned long flags;
+
+	mutex_lock(&port->state->port.mutex);
+
+	if (port->uartclk == uartclk)
+		goto out_lock;
+
+	port->uartclk = uartclk;
+	termios = &port->state->port.tty->termios;
+
+	baud = serial8250_get_baud_rate(port, termios, NULL);
+	quot = serial8250_get_divisor(port, baud, &frac);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	serial8250_set_divisor(port, baud, quot, frac);
+	serial_port_out(port, UART_LCR, up->lcr);
+	serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+out_lock:
+	mutex_unlock(&port->state->port.mutex);
+}
+EXPORT_SYMBOL(serial8250_update_uartclk);
+
 void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			  struct ktermios *old)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 6545f8cfc8fa..2b70f736b091 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -155,6 +155,8 @@ extern int early_serial_setup(struct uart_port *port);
 
 extern int early_serial8250_setup(struct earlycon_device *device,
 					 const char *options);
+extern void serial8250_update_uartclk(struct uart_port *port,
+				      unsigned int uartclk);
 extern void serial8250_do_set_termios(struct uart_port *port,
 		struct ktermios *termios, struct ktermios *old);
 extern void serial8250_do_set_ldisc(struct uart_port *port,
-- 
2.25.1


  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200306130231.05BBC8030795@mail.baikalelectronics.ru>
     [not found] ` <20200306134049.86F8180307C2@mail.baikalelectronics.ru>
     [not found]   ` <20200310001444.B0F50803087C@mail.baikalelectronics.ru>
2020-03-10 14:17     ` [PATCH] serial: 8250_dw: Fix common clocks usage race condition Andy Shevchenko
     [not found]     ` <20200310141715.7063280307CA@mail.baikalelectronics.ru>
2020-03-12 18:47       ` Sergey Semin
2020-03-18 15:19         ` Andy Shevchenko
2020-03-23  2:46 ` [PATCH v2] " Sergey.Semin
2020-03-23  9:20   ` Andy Shevchenko
2020-03-23 11:11     ` Sergey Semin
2020-03-23 11:52       ` Andy Shevchenko
2020-03-23 17:07         ` Sergey Semin
2020-03-23 10:01   ` Maxime Ripard
2020-03-23 13:50     ` Sergey Semin
2020-03-24  9:41       ` Maxime Ripard
2020-03-24 10:12       ` Andy Shevchenko
2020-03-25 17:11         ` Sergey Semin
2020-03-26  1:44           ` Stephen Boyd
2020-03-27  9:12             ` Sergey Semin
2020-05-06 23:31   ` [PATCH v3 0/4] serial: 8250_dw: Fix ref clock usage Serge Semin
2020-05-06 23:31     ` [PATCH v3 1/4] serial: 8250: Fix max baud limit in generic 8250 port Serge Semin
2020-05-15 13:48       ` Andy Shevchenko
2020-05-06 23:31     ` Serge Semin [this message]
2020-05-15 12:45       ` [PATCH v3 2/4] serial: 8250: Add 8250 port clock update method Greg Kroah-Hartman
2020-05-15 14:32         ` Serge Semin
2020-05-06 23:31     ` [PATCH v3 3/4] serial: 8250_dw: Simplify the ref clock rate setting procedure Serge Semin
2020-05-15 14:05       ` Andy Shevchenko
2020-05-15 14:50         ` Serge Semin
2020-05-15 15:05           ` Andy Shevchenko
2020-05-06 23:31     ` [PATCH v3 4/4] serial: 8250_dw: Fix common clocks usage race condition Serge Semin
2020-05-15 14:10       ` Andy Shevchenko
2020-05-15 15:19         ` Serge Semin
2020-05-07 18:29     ` [PATCH v3 0/4] serial: 8250_dw: Fix ref clock usage Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200506233136.11842-3-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=0x7f454c46@gmail.com \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=allison@lohutok.net \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=fancer.lancer@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=long.cheng@mediatek.com \
    --cc=lukas@wunner.de \
    --cc=mika.westerberg@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=sr@denx.de \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=vigneshr@ti.com \
    --cc=will@kernel.org \
    --cc=yegorslists@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git