Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver
@ 2020-10-13 14:45 Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 1/5] dt-bindings: vendor: add vendor prefix for LiteX Mateusz Holenko
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

This patchset introduces support for LiteX SoC Controller
and LiteUART - serial device from LiteX SoC builder
(https://github.com/enjoy-digital/litex).

In the following patchset I will add
a new mor1kx-based (OpenRISC) platform that
uses this device.

Later I plan to extend this platform by
adding support for more devices from LiteX suite.

Changes in v12:
    - fixed descriptions in yaml files
    - simplified probe implementations
    - introduced litex_{read,write}{8,16,32,64}() fast accessors
    - added formal documentation of litex_get_reg()/litex_set_reg()
    - fixed possible memory leaks
    - removed spin locks from CSR accessors

Changes in v11:
    - added Reviewed-by tag
    - reformatted some comments
    - switched to WARN instead of BUG on CSR validation fail

Changes in v10:
    - added casting to avoid sparse warnings in the SoC Controller's driver

Changes in v9:
    - fixed the `reg` node notation in the DT example
    - added exporting of the `litex_set_reg`/`litex_get_reg` symbols

Changes in v8:
    - fixed help messages in LiteUART's KConfig
    - removed dependency between LiteUART and LiteX SoC drivers
    - removed `litex_check_accessors()` helper function
    - added crashing (BUG) on the failed LiteX CSR access test

Changes in v7:
    - added missing include directive in UART's driver

Changes in v6:
    - changed accessors in SoC Controller's driver
    - reworked UART driver

Changes in v5:
    - added Reviewed-by tag
    - removed custom accessors from SoC Controller's driver
    - fixed error checking in SoC Controller's driver

Changes in v4:
    - fixed copyright headers
    - fixed SoC Controller's yaml 
    - simplified SoC Controller's driver

Changes in v3:
    - added Acked-by and Reviewed-by tags
    - introduced LiteX SoC Controller driver
    - removed endianness detection (handled now by LiteX SoC Controller driver)
    - modified litex.h header
    - DTS aliases for LiteUART made optional
    - renamed SERIAL_LITEUART_NR_PORTS to SERIAL_LITEUART_MAX_PORTS
    - changed PORT_LITEUART from 122 to 123

Changes in v2:
    - binding description rewritten to a yaml schema file
    - added litex.h header with common register access functions

Filip Kokosinski (3):
  dt-bindings: vendor: add vendor prefix for LiteX
  dt-bindings: serial: document LiteUART bindings
  drivers/tty/serial: add LiteUART driver

Pawel Czarnecki (2):
  dt-bindings: soc: document LiteX SoC Controller bindings
  drivers/soc/litex: add LiteX SoC Controller driver

 .../bindings/serial/litex,liteuart.yaml       |  38 ++
 .../soc/litex/litex,soc-controller.yaml       |  39 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   9 +
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/litex/Kconfig                     |  19 +
 drivers/soc/litex/Makefile                    |   3 +
 drivers/soc/litex/litex_soc_ctrl.c            | 176 ++++++++
 drivers/tty/serial/Kconfig                    |  32 ++
 drivers/tty/serial/Makefile                   |   1 +
 drivers/tty/serial/liteuart.c                 | 404 ++++++++++++++++++
 include/linux/litex.h                         | 103 +++++
 13 files changed, 831 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/litex,liteuart.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
 create mode 100644 drivers/soc/litex/Kconfig
 create mode 100644 drivers/soc/litex/Makefile
 create mode 100644 drivers/soc/litex/litex_soc_ctrl.c
 create mode 100644 drivers/tty/serial/liteuart.c
 create mode 100644 include/linux/litex.h

-- 
2.25.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v12 1/5] dt-bindings: vendor: add vendor prefix for LiteX
  2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
@ 2020-10-13 14:45 ` Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 2/5] dt-bindings: soc: document LiteX SoC Controller bindings Mateusz Holenko
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

From: Filip Kokosinski <fkokosinski@antmicro.com>

Add vendor prefix for LiteX SoC builder.

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
---

Notes:
    No changes in v12.

    No changes in v11.

    No changes in v10.

    No changes in v9.

    No changes in v8.

    No changes in v7.

    No changes in v6.

    No changes in v5.

    No changes in v4.

    Changes in v3:
    - added Acked-by tag
    
    No changes in v2.

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d3891386d671..9aae6c56d7a3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -571,6 +571,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^litex,.*":
+    description: LiteX SoC builder
   "^lltc,.*":
     description: Linear Technology Corporation
   "^logicpd,.*":
-- 
2.25.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v12 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
  2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 1/5] dt-bindings: vendor: add vendor prefix for LiteX Mateusz Holenko
@ 2020-10-13 14:45 ` Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 3/5] drivers/soc/litex: add LiteX SoC Controller driver Mateusz Holenko
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

From: Pawel Czarnecki <pczarnecki@internships.antmicro.com>

Add documentation for LiteX SoC Controller bindings.

Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    Changes in v12:
    - fixed the description and the example in the yaml file

    No changes in v11.

    No changes in v10.

    Changes in v9:
        - fixed the `reg` node notation in the DT example

    No changes in v8.

    No changes in v7.

    Changes in v6:
        - fixed license header

    Changes in v5:
        - added reviewed-by tag
    
    Changes in v4:
        - changes compatible to "litex,soc-controller"
        - fixed yaml's header
        - removed unnecessary sections from yaml
        - fixed indentation in yaml
    
    This commit has been introduced in v3 of the patchset.

 .../soc/litex/litex,soc-controller.yaml       | 39 +++++++++++++++++++
 MAINTAINERS                                   |  6 +++
 2 files changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml

diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
new file mode 100644
index 000000000000..53121c1fbe4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2020 Antmicro <www.antmicro.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: LiteX SoC Controller driver
+
+description: |
+  This is the SoC Controller driver for the LiteX SoC Builder.
+  Its purpose is to verify LiteX CSR (Control&Status Register) access
+  operations and provide functions for other drivers to read/write CSRs
+  and to check if those accessors are ready to be used.
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+properties:
+  compatible:
+    const: litex,soc-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    soc_ctrl0: soc-controller@f0000000 {
+        compatible = "litex,soc-controller";
+        reg = <0xf0000000 0xc>;
+        status = "okay";
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7b58ca29cc80..39be98db7418 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9835,6 +9835,12 @@ L:	kunit-dev@googlegroups.com
 S:	Maintained
 F:	lib/list-test.c
 
+LITEX PLATFORM
+M:	Karol Gugala <kgugala@antmicro.com>
+M:	Mateusz Holenko <mholenko@antmicro.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/*/litex,*.yaml
+
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
 M:	Jiri Kosina <jikos@kernel.org>
-- 
2.25.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v12 3/5] drivers/soc/litex: add LiteX SoC Controller driver
  2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 1/5] dt-bindings: vendor: add vendor prefix for LiteX Mateusz Holenko
  2020-10-13 14:45 ` [PATCH v12 2/5] dt-bindings: soc: document LiteX SoC Controller bindings Mateusz Holenko
@ 2020-10-13 14:45 ` Mateusz Holenko
  2020-10-13 14:46 ` [PATCH v12 4/5] dt-bindings: serial: document LiteUART bindings Mateusz Holenko
  2020-10-13 14:46 ` [PATCH v12 5/5] drivers/tty/serial: add LiteUART driver Mateusz Holenko
  4 siblings, 0 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

From: Pawel Czarnecki <pczarnecki@internships.antmicro.com>

This commit adds driver for the FPGA-based LiteX SoC
Controller from LiteX SoC builder.

Co-developed-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
---

Notes:
    Changes in v12:
    - removed unnecssary WARN on a failed validation (panic is enough)
    - simplified probe implementation
    - introduced litex_{read,write}{8,16,32,64}() fast accessors
    - added formal documentation of litex_get_reg()/litex_set_reg()
    - added LITEX config symbol
    - removed unnecessary header include
    - removed spin locks from CSR accessors

    Changes in v11:
    - removed an unnecessary comment left over from previous version
    - changed a multi-line comment to comply with the formatting rules
    - use WARN instad of BUG on a failed CSR validation

    Changes in v10:
    - added casting to avoid sparse warnings in the SoC Controller's driver
    
    Changes in v9:
    - added exporting of the `litex_set_reg`/`litex_get_reg` symbols

    Changes in v8:
    - removed `litex_check_accessors()` helper function
    - added crashing (BUG) on the failed LiteX CSR access test

    No changes in v7.

    Changes in v6:
    - added dependency on OF || COMPILE_TEST
    - used le32_to_cpu(readl(addr)) instead of __raw_readl
      and writel(cpu_to_le32(value), addr) instead of __raw_writel
      to take advantage of memory barriers provided by readl/writel

    Changes in v5:
    - removed helper accessors and used __raw_readl/__raw_writel instead
    - fixed checking for errors in litex_soc_ctrl_probe

    Changes in v4:
    - fixed indent in Kconfig's help section
    - fixed copyright header
    - changed compatible to "litex,soc-controller"
    - simplified litex_soc_ctrl_probe
    - removed unnecessary litex_soc_ctrl_remove
   
    This commit has been introduced in v3 of the patchset.
    
    It includes a simplified version of common 'litex.h'
    header introduced in v2 of the patchset.

 MAINTAINERS                        |   2 +
 drivers/soc/Kconfig                |   1 +
 drivers/soc/Makefile               |   1 +
 drivers/soc/litex/Kconfig          |  19 ++++
 drivers/soc/litex/Makefile         |   3 +
 drivers/soc/litex/litex_soc_ctrl.c | 178 +++++++++++++++++++++++++++++
 include/linux/litex.h              | 103 ++++++++++++++++
 7 files changed, 307 insertions(+)
 create mode 100644 drivers/soc/litex/Kconfig
 create mode 100644 drivers/soc/litex/Makefile
 create mode 100644 drivers/soc/litex/litex_soc_ctrl.c
 create mode 100644 include/linux/litex.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 39be98db7418..4d70a1b22a87 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9840,6 +9840,8 @@ M:	Karol Gugala <kgugala@antmicro.com>
 M:	Mateusz Holenko <mholenko@antmicro.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/litex,*.yaml
+F:	drivers/soc/litex/litex_soc_ctrl.c
+F:	include/linux/litex.h
 
 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 425ab6f7e375..d097d070f579 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -9,6 +9,7 @@ source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/fsl/Kconfig"
 source "drivers/soc/imx/Kconfig"
 source "drivers/soc/ixp4xx/Kconfig"
+source "drivers/soc/litex/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/renesas/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 36452bed86ef..0b16108823ef 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_GEMINI)	+= gemini/
 obj-y				+= imx/
 obj-$(CONFIG_ARCH_IXP4XX)	+= ixp4xx/
 obj-$(CONFIG_SOC_XWAY)		+= lantiq/
+obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
 obj-y				+= mediatek/
 obj-y				+= amlogic/
 obj-y				+= qcom/
diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
new file mode 100644
index 000000000000..c974ec3846bc
--- /dev/null
+++ b/drivers/soc/litex/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License_Identifier: GPL-2.0
+
+menu "Enable LiteX SoC Builder specific drivers"
+
+config LITEX
+	bool
+
+config LITEX_SOC_CONTROLLER
+	tristate "Enable LiteX SoC Controller driver"
+	depends on OF || COMPILE_TEST
+	select LITEX
+	help
+	  This option enables the SoC Controller Driver which verifies
+	  LiteX CSR access and provides common litex_get_reg/litex_set_reg
+	  accessors.
+	  All drivers that use functions from litex.h must depend on
+	  LITEX.
+
+endmenu
diff --git a/drivers/soc/litex/Makefile b/drivers/soc/litex/Makefile
new file mode 100644
index 000000000000..98ff7325b1c0
--- /dev/null
+++ b/drivers/soc/litex/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License_Identifier: GPL-2.0
+
+obj-$(CONFIG_LITEX_SOC_CONTROLLER)	+= litex_soc_ctrl.o
diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
new file mode 100644
index 000000000000..08330c9872b0
--- /dev/null
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteX SoC Controller Driver
+ *
+ * Copyright (C) 2020 Antmicro <www.antmicro.com>
+ *
+ */
+
+#include <linux/litex.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+/*
+ * LiteX SoC Generator, depending on the configuration, can split a single
+ * logical CSR (Control&Status Register) into a series of consecutive physical
+ * registers.
+ *
+ * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
+ * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
+ * 32-bit physical registers, each one containing one byte of meaningful data.
+ *
+ * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
+ *
+ * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
+ * of writing to/reading from the LiteX CSR in a single place that can be
+ * then reused by all LiteX drivers.
+ */
+
+/**
+ * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ * @val: Value to be written to the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function splits a single possibly multi-byte write into a series of
+ * single-byte writes with a proper offset.
+ */
+void litex_set_reg(void __iomem *reg, unsigned long reg_size,
+		    unsigned long val)
+{
+	unsigned long shifted_data, shift, i;
+
+	for (i = 0; i < reg_size; ++i) {
+		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+		shifted_data = val >> shift;
+
+		WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
+	}
+}
+EXPORT_SYMBOL_GPL(litex_set_reg);
+
+/**
+ * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ *
+ * Return: Value read from the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function generates a series of single-byte reads with a proper offset
+ * and joins their results into a single multi-byte value.
+ */
+unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_size)
+{
+	unsigned long shifted_data, shift, i;
+	unsigned long result = 0;
+
+	for (i = 0; i < reg_size; ++i) {
+		shifted_data = READ_LITEX_SUBREGISTER(reg, i);
+
+		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+		result |= (shifted_data << shift);
+	}
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(litex_get_reg);
+
+#define SCRATCH_REG_OFF         0x04
+#define SCRATCH_REG_VALUE       0x12345678
+#define SCRATCH_TEST_VALUE      0xdeadbeef
+
+/*
+ * Check LiteX CSR read/write access
+ *
+ * This function reads and writes a scratch register in order to verify if CSR
+ * access works.
+ *
+ * In case any problems are detected, the driver should panic.
+ *
+ * Access to the LiteX CSR is, by design, done in CPU native endianness.
+ * The driver should not dynamically configure access functions when
+ * the endianness mismatch is detected. Such situation indicates problems in
+ * the soft SoC design and should be solved at the LiteX generator level,
+ * not in the software.
+ */
+static int litex_check_csr_access(void __iomem *reg_addr)
+{
+	unsigned long reg;
+
+	reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+	if (reg != SCRATCH_REG_VALUE) {
+		panic("Scratch register read error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+			SCRATCH_REG_VALUE, reg);
+		return -EINVAL;
+	}
+
+	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_TEST_VALUE);
+	reg = litex_read32(reg_addr + SCRATCH_REG_OFF);
+
+	if (reg != SCRATCH_TEST_VALUE) {
+		panic("Scratch register write error - the system is probably broken! Expected: 0x%x but got: 0x%lx",
+			SCRATCH_TEST_VALUE, reg);
+		return -EINVAL;
+	}
+
+	/* restore original value of the SCRATCH register */
+	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE);
+
+	pr_info("LiteX SoC Controller driver initialized");
+
+	return 0;
+}
+
+struct litex_soc_ctrl_device {
+	void __iomem *base;
+};
+
+static const struct of_device_id litex_soc_ctrl_of_match[] = {
+	{.compatible = "litex,soc-controller"},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, litex_soc_ctrl_of_match);
+
+static int litex_soc_ctrl_probe(struct platform_device *pdev)
+{
+	struct litex_soc_ctrl_device *soc_ctrl_dev;
+
+	soc_ctrl_dev = devm_kzalloc(&pdev->dev, sizeof(*soc_ctrl_dev), GFP_KERNEL);
+	if (!soc_ctrl_dev)
+		return -ENOMEM;
+
+	soc_ctrl_dev->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(soc_ctrl_dev->base))
+		return PTR_ERR(soc_ctrl_dev->base);
+
+	return litex_check_csr_access(soc_ctrl_dev->base);
+}
+
+static struct platform_driver litex_soc_ctrl_driver = {
+	.driver = {
+		.name = "litex-soc-controller",
+		.of_match_table = of_match_ptr(litex_soc_ctrl_of_match)
+	},
+	.probe = litex_soc_ctrl_probe,
+};
+
+module_platform_driver(litex_soc_ctrl_driver);
+MODULE_DESCRIPTION("LiteX SoC Controller driver");
+MODULE_AUTHOR("Antmicro <www.antmicro.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/litex.h b/include/linux/litex.h
new file mode 100644
index 000000000000..72061018c172
--- /dev/null
+++ b/include/linux/litex.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common LiteX header providing
+ * helper functions for accessing CSRs.
+ *
+ * Implementation of the functions is provided by
+ * the LiteX SoC Controller driver.
+ *
+ * Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
+ */
+
+#ifndef _LINUX_LITEX_H
+#define _LINUX_LITEX_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/compiler_types.h>
+
+/*
+ * The parameters below are true for LiteX SoCs configured for 8-bit CSR Bus,
+ * 32-bit aligned.
+ *
+ * Supporting other configurations will require extending the logic in this
+ * header and in the LiteX SoC controller driver.
+ */
+#define LITEX_REG_SIZE	  0x4
+#define LITEX_SUBREG_SIZE	0x1
+#define LITEX_SUBREG_SIZE_BIT	 (LITEX_SUBREG_SIZE * 8)
+
+#define WRITE_LITEX_SUBREGISTER(val, base_offset, subreg_id) \
+	writel((u32 __force)cpu_to_le32(val), base_offset + (LITEX_REG_SIZE * subreg_id))
+
+#define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
+	le32_to_cpu((__le32 __force)readl(base_offset + (LITEX_REG_SIZE * subreg_id)))
+
+void litex_set_reg(void __iomem *reg, unsigned long reg_sz, unsigned long val);
+
+unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_sz);
+
+static inline void litex_write8(void __iomem *reg, u8 val)
+{
+	WRITE_LITEX_SUBREGISTER(val, reg, 0);
+}
+
+static inline void litex_write16(void __iomem *reg, u16 val)
+{
+	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 0);
+	WRITE_LITEX_SUBREGISTER(val, reg, 1);
+}
+
+static inline void litex_write32(void __iomem *reg, u32 val)
+{
+	WRITE_LITEX_SUBREGISTER(val >> 24, reg, 0);
+	WRITE_LITEX_SUBREGISTER(val >> 16, reg, 1);
+	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 2);
+	WRITE_LITEX_SUBREGISTER(val, reg, 3);
+}
+
+static inline void litex_write64(void __iomem *reg, u64 val)
+{
+	WRITE_LITEX_SUBREGISTER(val >> 56, reg, 0);
+	WRITE_LITEX_SUBREGISTER(val >> 48, reg, 1);
+	WRITE_LITEX_SUBREGISTER(val >> 40, reg, 2);
+	WRITE_LITEX_SUBREGISTER(val >> 32, reg, 3);
+	WRITE_LITEX_SUBREGISTER(val >> 24, reg, 4);
+	WRITE_LITEX_SUBREGISTER(val >> 16, reg, 5);
+	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 6);
+	WRITE_LITEX_SUBREGISTER(val, reg, 7);
+}
+
+static inline u8 litex_read8(void __iomem *reg)
+{
+	return READ_LITEX_SUBREGISTER(reg, 0);
+}
+
+static inline u16 litex_read16(void __iomem *reg)
+{
+	return (READ_LITEX_SUBREGISTER(reg, 0) << 8)
+		| (READ_LITEX_SUBREGISTER(reg, 1));
+}
+
+static inline u32 litex_read32(void __iomem *reg)
+{
+	return (READ_LITEX_SUBREGISTER(reg, 0) << 24)
+		| (READ_LITEX_SUBREGISTER(reg, 1) << 16)
+		| (READ_LITEX_SUBREGISTER(reg, 2) << 8)
+		| (READ_LITEX_SUBREGISTER(reg, 3));
+}
+
+static inline u64 litex_read64(void __iomem *reg)
+{
+	return ((u64)READ_LITEX_SUBREGISTER(reg, 0) << 56)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 1) << 48)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 2) << 40)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 3) << 32)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 4) << 24)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 5) << 16)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 6) << 8)
+		| ((u64)READ_LITEX_SUBREGISTER(reg, 7));
+}
+
+#endif /* _LINUX_LITEX_H */
-- 
2.25.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v12 4/5] dt-bindings: serial: document LiteUART bindings
  2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
                   ` (2 preceding siblings ...)
  2020-10-13 14:45 ` [PATCH v12 3/5] drivers/soc/litex: add LiteX SoC Controller driver Mateusz Holenko
@ 2020-10-13 14:46 ` Mateusz Holenko
  2020-10-13 14:46 ` [PATCH v12 5/5] drivers/tty/serial: add LiteUART driver Mateusz Holenko
  4 siblings, 0 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:46 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

From: Filip Kokosinski <fkokosinski@antmicro.com>

Add documentation for LiteUART devicetree bindings.

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    Changes in v12:
    - fixed the description in the yaml file

    No changes in v11.

    No changes in v10.

    No changes in v9.

    No changes in v8.

    No changes in v7.

    Changes in v6:
    - fixed license header

    No changes in v5.

    No changes in v4.

    Changes in v3:
    - added Reviewed-by tag
    - patch number changed from 3 to 4
    - removed changes in MAINTAINERS file (moved to patch #2)
    
    Changes in v2:
    - binding description rewritten to a yaml schema file
    - added interrupt line
    - fixed unit address
    - patch number changed from 2 to 3

 .../bindings/serial/litex,liteuart.yaml       | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/litex,liteuart.yaml

diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
new file mode 100644
index 000000000000..69acb222bb57
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/litex,liteuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteUART serial controller
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+description: |
+  LiteUART serial controller is a part of the LiteX FPGA SoC builder. It supports
+  multiple CPU architectures, currently including e.g. OpenRISC and RISC-V.
+
+properties:
+  compatible:
+    const: litex,liteuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    uart0: serial@e0001800 {
+      compatible = "litex,liteuart";
+      reg = <0xe0001800 0x100>;
+      interrupts = <2>;
+    };
-- 
2.25.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v12 5/5] drivers/tty/serial: add LiteUART driver
  2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
                   ` (3 preceding siblings ...)
  2020-10-13 14:46 ` [PATCH v12 4/5] dt-bindings: serial: document LiteUART bindings Mateusz Holenko
@ 2020-10-13 14:46 ` Mateusz Holenko
  4 siblings, 0 replies; 6+ messages in thread
From: Mateusz Holenko @ 2020-10-13 14:46 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Greg Kroah-Hartman, Jiri Slaby,
	devicetree, linux-serial
  Cc: Stafford Horne, Karol Gugala, Mateusz Holenko,
	Mauro Carvalho Chehab, David S. Miller, Paul E. McKenney,
	Filip Kokosinski, Pawel Czarnecki, Joel Stanley,
	Jonathan Cameron, Maxime Ripard, Shawn Guo, Heiko Stuebner,
	Sam Ravnborg, Icenowy Zheng, Laurent Pinchart, linux-kernel,
	Gabriel L. Somlo

From: Filip Kokosinski <fkokosinski@antmicro.com>

This commit adds driver for the FPGA-based LiteUART serial controller
from LiteX SoC builder.

The current implementation supports LiteUART configured
for 32 bit data width and 8 bit CSR bus width.

It does not support IRQ.

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

Notes:
    Changes in v12:
    - added xa_erase call in remove function
    - used devm_kzalloc instead of kzalloc
    - simplified probe implementation
    - switched to non-loop based LiteX CSR accessors
    - switched config dependency from LITEX_SOC_CONTROLLER to LITEX

    Changes in v11:
    - added Reviewed-by tag

    No changes in v10.

    No changes in v9.

    Changes in v8:
    - fixed help messages in LiteUART's KConfig
    - removed dependency between LiteUART and LiteX SoC drivers

    Changed in v7:
    - added missing include directive

    Changes in v6:
    - LiteUART ports now stored in xArray
    - removed PORT_LITEUART
    - fixed formatting
    - removed some unnecessary defines

    No changes in v5.

    Changes in v4:
    - fixed copyright header
    - removed a wrong dependency on UARTLITE from Kconfig
    - added a dependency on LITEX_SOC_CONTROLLER to LITEUART in Kconfig

    Changes in v3:
    - aliases made optional
    - used litex_get_reg/litex_set_reg functions instead of macros
    - SERIAL_LITEUART_NR_PORTS renamed to SERIAL_LITEUART_MAX_PORTS
    - PORT_LITEUART changed from 122 to 123
    - added dependency on LITEX_SOC_CONTROLLER
    - patch number changed from 4 to 5

    No changes in v2.

 MAINTAINERS                   |   1 +
 drivers/tty/serial/Kconfig    |  32 +++
 drivers/tty/serial/Makefile   |   1 +
 drivers/tty/serial/liteuart.c | 404 ++++++++++++++++++++++++++++++++++
 4 files changed, 438 insertions(+)
 create mode 100644 drivers/tty/serial/liteuart.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 8136620d4f35..c0a76996619b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10124,6 +10124,7 @@ M:	Mateusz Holenko <mholenko@antmicro.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/litex,*.yaml
 F:	drivers/soc/litex/litex_soc_ctrl.c
+F:	drivers/tty/serial/liteuart.c
 F:	include/linux/litex.h
 
 LIVE PATCHING
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 9409be982aa6..8bf247e3214a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1580,6 +1580,38 @@ config SERIAL_MILBEAUT_USIO_CONSOLE
 	  receives all kernel messages and warnings and which allows logins in
 	  single user mode).
 
+config SERIAL_LITEUART
+	tristate "LiteUART serial port support"
+	depends on HAS_IOMEM
+	depends on OF || COMPILE_TEST
+	depends on LITEX
+	select SERIAL_CORE
+	help
+	  This driver is for the FPGA-based LiteUART serial controller from LiteX
+	  SoC builder.
+
+	  Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
+	  Otherwise, say 'N'.
+
+config SERIAL_LITEUART_MAX_PORTS
+	int "Maximum number of LiteUART ports"
+	depends on SERIAL_LITEUART
+	default "1"
+	help
+	  Set this to the maximum number of serial ports you want the driver
+	  to support.
+
+config SERIAL_LITEUART_CONSOLE
+	bool "LiteUART serial port console support"
+	depends on SERIAL_LITEUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
+	  controller from LiteX SoC builder as the system console
+	  (the system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode).
+	  Otherwise, say 'N'.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index caf167f0c10a..ed4be0ebab8d 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SERIAL_OWL)	+= owl-uart.o
 obj-$(CONFIG_SERIAL_RDA)	+= rda-uart.o
 obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o
 obj-$(CONFIG_SERIAL_SIFIVE)	+= sifive.o
+obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
new file mode 100644
index 000000000000..0bf6bff84fff
--- /dev/null
+++ b/drivers/tty/serial/liteuart.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LiteUART serial controller (LiteX) Driver
+ *
+ * Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
+ */
+
+#include <linux/console.h>
+#include <linux/litex.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/tty_flip.h>
+#include <linux/xarray.h>
+
+/*
+ * CSRs definitions (base address offsets + width)
+ *
+ * The definitions below are true for LiteX SoC configured for 8-bit CSR Bus,
+ * 32-bit aligned.
+ *
+ * Supporting other configurations might require new definitions or a more
+ * generic way of indexing the LiteX CSRs.
+ *
+ * For more details on how CSRs are defined and handled in LiteX, see comments
+ * in the LiteX SoC Driver: drivers/soc/litex/litex_soc_ctrl.c
+ */
+#define OFF_RXTX	0x00
+#define OFF_TXFULL	0x04
+#define OFF_RXEMPTY	0x08
+#define OFF_EV_STATUS	0x0c
+#define OFF_EV_PENDING	0x10
+#define OFF_EV_ENABLE	0x14
+
+/* events */
+#define EV_TX		0x1
+#define EV_RX		0x2
+
+struct liteuart_port {
+	struct uart_port port;
+	struct timer_list timer;
+	u32 id;
+};
+
+#define to_liteuart_port(port)	container_of(port, struct liteuart_port, port)
+
+static DEFINE_XARRAY_FLAGS(liteuart_array, XA_FLAGS_ALLOC);
+
+#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
+static struct console liteuart_console;
+#endif
+
+static struct uart_driver liteuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "liteuart",
+	.dev_name = "ttyLXU",
+	.major = 0,
+	.minor = 0,
+	.nr = CONFIG_SERIAL_LITEUART_MAX_PORTS,
+#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
+	.cons = &liteuart_console,
+#endif
+};
+
+static void liteuart_timer(struct timer_list *t)
+{
+	struct liteuart_port *uart = from_timer(uart, t, timer);
+	struct uart_port *port = &uart->port;
+	unsigned char __iomem *membase = port->membase;
+	unsigned int flg = TTY_NORMAL;
+	int ch;
+	unsigned long status;
+
+	while ((status = !litex_read8(membase + OFF_RXEMPTY)) == 1) {
+		ch = litex_read8(membase + OFF_RXTX);
+		port->icount.rx++;
+
+		/* necessary for RXEMPTY to refresh its value */
+		litex_write8(membase + OFF_EV_PENDING, EV_TX | EV_RX);
+
+		/* no overflow bits in status */
+		if (!(uart_handle_sysrq_char(port, ch)))
+			uart_insert_char(port, status, 0, ch, flg);
+
+		tty_flip_buffer_push(&port->state->port);
+	}
+
+	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+}
+
+static void liteuart_putchar(struct uart_port *port, int ch)
+{
+	while (litex_read8(port->membase + OFF_TXFULL))
+		cpu_relax();
+
+	litex_write8(port->membase + OFF_RXTX, ch);
+}
+
+static unsigned int liteuart_tx_empty(struct uart_port *port)
+{
+	/* not really tx empty, just checking if tx is not full */
+	if (!litex_read8(port->membase + OFF_TXFULL))
+		return TIOCSER_TEMT;
+
+	return 0;
+}
+
+static void liteuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* modem control register is not present in LiteUART */
+}
+
+static unsigned int liteuart_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void liteuart_stop_tx(struct uart_port *port)
+{
+}
+
+static void liteuart_start_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned char ch;
+
+	if (unlikely(port->x_char)) {
+		litex_write8(port->membase + OFF_RXTX, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+	} else if (!uart_circ_empty(xmit)) {
+		while (xmit->head != xmit->tail) {
+			ch = xmit->buf[xmit->tail];
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+			port->icount.tx++;
+			liteuart_putchar(port, ch);
+		}
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void liteuart_stop_rx(struct uart_port *port)
+{
+	struct liteuart_port *uart = to_liteuart_port(port);
+
+	/* just delete timer */
+	del_timer(&uart->timer);
+}
+
+static void liteuart_break_ctl(struct uart_port *port, int break_state)
+{
+	/* LiteUART doesn't support sending break signal */
+}
+
+static int liteuart_startup(struct uart_port *port)
+{
+	struct liteuart_port *uart = to_liteuart_port(port);
+
+	/* disable events */
+	litex_write8(port->membase + OFF_EV_ENABLE, 0);
+
+	/* prepare timer for polling */
+	timer_setup(&uart->timer, liteuart_timer, 0);
+	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+
+	return 0;
+}
+
+static void liteuart_shutdown(struct uart_port *port)
+{
+}
+
+static void liteuart_set_termios(struct uart_port *port, struct ktermios *new,
+				 struct ktermios *old)
+{
+	unsigned int baud;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* update baudrate */
+	baud = uart_get_baud_rate(port, new, old, 0, 460800);
+	uart_update_timeout(port, new->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *liteuart_type(struct uart_port *port)
+{
+	return "liteuart";
+}
+
+static void liteuart_release_port(struct uart_port *port)
+{
+}
+
+static int liteuart_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void liteuart_config_port(struct uart_port *port, int flags)
+{
+	/*
+	 * Driver core for serial ports forces a non-zero value for port type.
+	 * Write an arbitrary value here to accommodate the serial core driver,
+	 * as ID part of UAPI is redundant.
+	 */
+	port->type = 1;
+}
+
+static int liteuart_verify_port(struct uart_port *port,
+				struct serial_struct *ser)
+{
+	if (port->type != PORT_UNKNOWN && ser->type != 1)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct uart_ops liteuart_ops = {
+	.tx_empty	= liteuart_tx_empty,
+	.set_mctrl	= liteuart_set_mctrl,
+	.get_mctrl	= liteuart_get_mctrl,
+	.stop_tx	= liteuart_stop_tx,
+	.start_tx	= liteuart_start_tx,
+	.stop_rx	= liteuart_stop_rx,
+	.break_ctl	= liteuart_break_ctl,
+	.startup	= liteuart_startup,
+	.shutdown	= liteuart_shutdown,
+	.set_termios	= liteuart_set_termios,
+	.type		= liteuart_type,
+	.release_port	= liteuart_release_port,
+	.request_port	= liteuart_request_port,
+	.config_port	= liteuart_config_port,
+	.verify_port	= liteuart_verify_port,
+};
+
+static int liteuart_probe(struct platform_device *pdev)
+{
+	struct liteuart_port *uart;
+	struct uart_port *port;
+	struct xa_limit limit;
+	int dev_id, ret;
+
+	/* look for aliases; auto-enumerate for free index if not found */
+	dev_id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (dev_id < 0)
+		limit = XA_LIMIT(0, CONFIG_SERIAL_LITEUART_MAX_PORTS);
+	else
+		limit = XA_LIMIT(dev_id, dev_id);
+
+	uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL);
+	if (!uart)
+		return -ENOMEM;
+
+	ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL);
+	if (ret)
+		return ret;
+
+	uart->id = dev_id;
+	port = &uart->port;
+
+	/* get membase */
+	port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (!port->membase)
+		return -ENXIO;
+
+	/* values not from device tree */
+	port->dev = &pdev->dev;
+	port->iotype = UPIO_MEM;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->ops = &liteuart_ops;
+	port->regshift = 2;
+	port->fifosize = 16;
+	port->iobase = 1;
+	port->type = PORT_UNKNOWN;
+	port->line = dev_id;
+	spin_lock_init(&port->lock);
+
+	return uart_add_one_port(&liteuart_driver, &uart->port);
+}
+
+static int liteuart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = platform_get_drvdata(pdev);
+	struct liteuart_port *uart = to_liteuart_port(port);
+
+	xa_erase(&liteuart_array, uart->id);
+
+	return 0;
+}
+
+static const struct of_device_id liteuart_of_match[] = {
+	{ .compatible = "litex,liteuart" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, liteuart_of_match);
+
+static struct platform_driver liteuart_platform_driver = {
+	.probe = liteuart_probe,
+	.remove = liteuart_remove,
+	.driver = {
+		.name = "liteuart",
+		.of_match_table = liteuart_of_match,
+	},
+};
+
+#ifdef CONFIG_SERIAL_LITEUART_CONSOLE
+
+static void liteuart_console_write(struct console *co, const char *s,
+	unsigned int count)
+{
+	struct liteuart_port *uart;
+	struct uart_port *port;
+	unsigned long flags;
+
+	uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index);
+	port = &uart->port;
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_console_write(port, s, count, liteuart_putchar);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int liteuart_console_setup(struct console *co, char *options)
+{
+	struct liteuart_port *uart;
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index);
+	if (!uart)
+		return -ENODEV;
+
+	port = &uart->port;
+	if (!port->membase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console liteuart_console = {
+	.name = "liteuart",
+	.write = liteuart_console_write,
+	.device = uart_console_device,
+	.setup = liteuart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &liteuart_driver,
+};
+
+static int __init liteuart_console_init(void)
+{
+	register_console(&liteuart_console);
+
+	return 0;
+}
+console_initcall(liteuart_console_init);
+#endif /* CONFIG_SERIAL_LITEUART_CONSOLE */
+
+static int __init liteuart_init(void)
+{
+	int res;
+
+	res = uart_register_driver(&liteuart_driver);
+	if (res)
+		return res;
+
+	res = platform_driver_register(&liteuart_platform_driver);
+	if (res) {
+		uart_unregister_driver(&liteuart_driver);
+		return res;
+	}
+
+	return 0;
+}
+
+static void __exit liteuart_exit(void)
+{
+	platform_driver_unregister(&liteuart_platform_driver);
+	uart_unregister_driver(&liteuart_driver);
+}
+
+module_init(liteuart_init);
+module_exit(liteuart_exit);
+
+MODULE_AUTHOR("Antmicro <www.antmicro.com>");
+MODULE_DESCRIPTION("LiteUART serial driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform: liteuart");
-- 
2.26.2


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13 14:45 [PATCH v12 0/5] LiteX SoC controller and LiteUART serial driver Mateusz Holenko
2020-10-13 14:45 ` [PATCH v12 1/5] dt-bindings: vendor: add vendor prefix for LiteX Mateusz Holenko
2020-10-13 14:45 ` [PATCH v12 2/5] dt-bindings: soc: document LiteX SoC Controller bindings Mateusz Holenko
2020-10-13 14:45 ` [PATCH v12 3/5] drivers/soc/litex: add LiteX SoC Controller driver Mateusz Holenko
2020-10-13 14:46 ` [PATCH v12 4/5] dt-bindings: serial: document LiteUART bindings Mateusz Holenko
2020-10-13 14:46 ` [PATCH v12 5/5] drivers/tty/serial: add LiteUART driver Mateusz Holenko

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git