[PATCH AUTOSEL 4.14 14/59] tty: serial: jsm: hold port lock when reporting modem line changes

[PATCH AUTOSEL 4.14 14/59] tty: serial: jsm: hold port lock when reporting modem line changes

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ]

uart_handle_dcd_change() requires a port lock to be held and will emit a
warning when lockdep is enabled.

Held corresponding lock to fix the following warnings.

[  132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120
[  132.530482] Modules linked in:
[  132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31
[  132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120
[  132.557100] Call Trace:
[  132.557562]  ? __free_pages+0x83/0xb0
[  132.558213]  neo_parse_modem+0x156/0x220
[  132.558897]  neo_param+0x399/0x840
[  132.559495]  jsm_tty_open+0x12f/0x2d0
[  132.560131]  uart_startup.part.18+0x153/0x340
[  132.560888]  ? lock_is_held_type+0xe9/0x140
[  132.561660]  uart_port_activate+0x7f/0xe0
[  132.562351]  ? uart_startup.part.18+0x340/0x340
[  132.563003]  tty_port_open+0x8d/0xf0
[  132.563523]  ? uart_set_options+0x1e0/0x1e0
[  132.564125]  uart_open+0x24/0x40
[  132.564604]  tty_open+0x15c/0x630

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/jsm/jsm_neo.c | 2 ++
 drivers/tty/serial/jsm/jsm_tty.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index c6fdd6369534..96e01bf4599c 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -827,7 +827,9 @@ static void neo_parse_isr(struct jsm_board *brd, u32 port)
 		/* Parse any modem signal changes */
 		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 			"MOD_STAT: sending to parse_modem_sigs\n");
+		spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
 		neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+		spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
 	}
 }
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index ec7d8383900f..7c790ff6b511 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -195,6 +195,7 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
 
 static int jsm_tty_open(struct uart_port *port)
 {
+	unsigned long lock_flags;
 	struct jsm_board *brd;
 	struct jsm_channel *channel =
 		container_of(port, struct jsm_channel, uart_port);
@@ -248,6 +249,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
+	spin_lock_irqsave(&port->lock, lock_flags);
 	termios = &port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
@@ -267,6 +269,7 @@ static int jsm_tty_open(struct uart_port *port)
 	jsm_carrier(channel);
 
 	channel->ch_open_count++;
+	spin_unlock_irqrestore(&port->lock, lock_flags);
 
 	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
-- 
2.30.2

[PATCH AUTOSEL 4.14 23/59] serial: 8250: Define RX trigger levels for OxSemi 950 devices

[Sasha Levin]

From: "Maciej W. Rozycki" <macro@orcam.me.uk>

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ]

Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120.  This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.

For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable.  Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.

Lower the default receive interrupt trigger level to 32 then, and make
it configurable.  Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].

References:

[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
    Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
    Levels", p. 22

[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_port.c | 3 ++-
 include/uapi/linux/serial_reg.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 20f58e9da2fb..7ac6bb38948f 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -136,7 +136,8 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16C950/954",
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+		.rxtrig_bytes	= {16, 32, 112, 120},
 		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 619fe6111dc9..a31ae32161f3 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -62,6 +62,7 @@
  * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
  * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
  * TI16C752:	 8  16  56  60		 8  16  32  56
+ * OX16C950:	16  32 112 120		16  32  64 112	PORT_16C950
  * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
  */
 #define UART_FCR_R_TRIG_00	0x00
-- 
2.30.2

[PATCH AUTOSEL 4.14 26/59] serial: 8250_pci: make setup_port() parameters explicitly unsigned

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ]

The bar and offset parameters to setup_port() are used in pointer math,
and while it would be very difficult to get them to wrap as a negative
number, just be "safe" and make them unsigned so that static checkers do
not trip over them unintentionally.

Cc: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jordy Zomer <jordy@pwning.systems>
Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 071ee37399b7..72015cc7b33f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -73,7 +73,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 
 static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
-	   int bar, int offset, int regshift)
+	   u8 bar, unsigned int offset, int regshift)
 {
 	struct pci_dev *dev = priv->dev;
 
-- 
2.30.2