Linux-sh Archive on lore.kernel.org
 help / color / Atom feed
From: Yusuke Goda <goda.yusuke@renesas.com>
To: linux-sh@vger.kernel.org
Subject: Re: USB boot problems submission
Date: Tue, 26 Jan 2010 09:24:21 +0000
Message-ID: <4B5EB4C5.7090301@renesas.com> (raw)
In-Reply-To: <4B5D3019.9080900@renesas.com>


[-- Attachment #1: Type: text/plain, Size: 713 bytes --]


Paul Mundt wrote:
> On Tue, Jan 26, 2010 at 05:33:18PM +0900, Yusuke Goda wrote:
>> Hi Paul-san
>>
>>> You should rebuild your kernel with verbose BUG reporting and all of the
>>> kallsyms bits turned on, which will give you a meaningful oops. That
>> I attach log(CONFIG_KALLSYMS=y).
>>
>>> should at least give us an idea of where things are going wrong,
>>> otherwise we go back to bisecting.
>> This problem seems to occur with the following commit.
>>  commit 2277ab4a1df50e05bc732fe9488d4e902bb8399a
>>   sh: Migrate from PG_mapped to PG_dcache_dirty.
>>
>> Sorry, I cannot identify it to number of lines.
> 
> Thanks. Can you try this again with the dwarf unwinder enabled?
OK. I attach it.

cheers,
Goda

[-- Attachment #2: ecovec-usbboot-dwarf_unwinder.log --]
[-- Type: text/plain, Size: 8580 bytes --]

## Starting application at 0x89000000 ...
Linux version 2.6.33-rc4 (root@gohda) (gcc version 4.3.4 (Debian 4.3.4-1) ) #38 PREEMPT Tue Jan 26 09:09:38 UTC 2010
Boot params:
... MOUNT_ROOT_RDONLY - 00000000
... RAMDISK_FLAGS     - 00000000
... ORIG_ROOT_DEV     - 00000000
... LOADER_TYPE       - 00000000
... INITRD_START      - 00000000
... INITRD_SIZE       - 00000000
Booting machvec: R0P7724 (EcoVec)
Node 0: start_pfn = 0x8000, low = 0xf800
Zone PFN ranges:
  Normal   0x00008000 -> 0x0000f800
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00008000 -> 0x0000f800
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30480
Kernel command line: console=tty0, console=ttySC0,115200 root=/dev/sda2 rootdelay=10 mem=120M memchunk.vpu=4m
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=10300b00 CVR=7144040d PRR=00002200
I-cache : n_ways=4 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=4 n_sets=256 way_incr=8192
D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
S-cache : n_ways=4 n_sets=2048 way_incr=65536
S-cache : entry_mask=0x0000ffe0 alias_mask=0x0000f000 n_aliases=16
Memory: 117760k/122880k available (2340k kernel code, 773k data, 104k init)
virtual kernel memory layout:
    fixmap  : 0xdffd6000 - 0xdffff000   ( 164 kB)
    vmalloc : 0xc0000000 - 0xdffd4000   ( 511 MB)
    lowmem  : 0x88000000 - 0x8f800000   ( 120 MB) (cached)
            : 0xa8000000 - 0xc8000000   ( 512 MB) (uncached)
      .init : 0x88396000 - 0x883b0000   ( 104 kB)
      .data : 0x8824a03c - 0x8830b6e0   ( 773 kB)
      .text : 0x88001000 - 0x8824a03c   (2340 kB)
Hierarchical RCU implementation.
NR_IRQS:256 nr_irqs:256
Console: colour dummy device 80x25
console [tty0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop (skipped)... 499.99 BogoMIPS PRESET (lpj=999999)
Mount-cache hash table entries: 512
CPU: SH7724
DWARF unwinder initialised: read 2 CIEs, 12534 FDEs
NET: Registered protocol family 16
vpu: forcing memory chunk size to 0x00400000
sh pinmux: sh7724_pfc handling gpio 0 -> 486
Performance Events: SH-4A support registered
HW Breakpoints: SH-4A UBC support registered
USB1 function is selected
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 230
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 100x30
graphics fb0: registered sh_mobile_lcdc_fb/mainlcd as 800x480 16bpp.
SuperH SCI(F) driver initialized
sh-sci.0: ttySC0 at MMIO 0xffe00000 (irq = 80) is a scif
console [ttySC0] enabled
sh-sci.1: ttySC1 at MMIO 0xffe10000 (irq = 81) is a scif
sh-sci.2: ttySC2 at MMIO 0xffe20000 (irq = 82) is a scif
sh-sci.3: ttySC3 at MMIO 0xa4e30000 (irq = 56) is a scifa
sh-sci.4: ttySC4 at MMIO 0xa4e40000 (irq = 88) is a scifa
sh-sci.5: ttySC5 at MMIO 0xa4e50000 (irq = 109) is a scifa
brd: module loaded
physmap platform flash device: 04000000 at 00000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
RedBoot partition parsing not available
Using physmap partition information
Creating 2 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000500000 : "boot loader"
0x000000500000-0x000004000000 : "free-area"
sh_mii: probed
Base address at 0xa4600000, 00:00:87:6B:BC:B0, IRQ 91.
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
r8a66597_hcd r8a66597_hcd.0: USB Host Controller
r8a66597_hcd r8a66597_hcd.0: new USB bus registered, assigned bus number 1
r8a66597_hcd r8a66597_hcd.0: irq 65, io base 0xa4d80000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: sh_keysc as /class/input/input0
i2c /dev entries driver
Linux video capture interface: v2.00
camera 0-0: Probing 0-0
sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver attached to camera 0
sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver detached from camera 0
camera: probe of 0-0 failed with error -12
camera 1-0: Probing 1-0
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver attached to camera 0
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver detached from camera 0
camera: probe of 1-0 failed with error -12
camera 1-1: Probing 1-1
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver attached to camera 1
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver detached from camera 1
camera: probe of 1-1 failed with error -12
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
heartbeat: version 0.1.2 loaded
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 10sec before mounting root device...
usb 1-1: new high speed USB device using r8a66597_hcd and address 2
scsi0 : usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access     I-O DATA USB Flash Disk   3A   PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 4014080 512-byte logical blocks: (2.05 GB/1.91 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): recovery complete
EXT3-fs (sda2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:2.
Freeing unused kernel memory: 104k freed
Kernel panic - not syncing: Attempted to kill init!
Stack: (0x8f01de1c to 0x8f01e000)
de00:                                                                88246362 
de20: 8f01de2c 881269ec 8827ff30 882463c0 8f01de34 8f01de58 8801ba74 8f01de64 
de40: 8f1f9580 8f01fd60 8f01def0 8f01acc0 8f01acc0 882ea314 8f01acb8 00000000 
de60: 8f01de3c 8f01de64 00000001 0000000b 8f01dfa4 8f01de74 8f01de74 8801c068 
de80: 8f01de9c 8f1f9580 8f01fd60 8f01def0 0000000a 0000000b 8f01fd60 88025c14 
dea0: 8f01deac 0000000a 8f1f964c 8f01dfa4 8f01df70 88005468 8f01ded4 8f01dfa4 
dec0: 29583004 00000001 880080f0 880080f0 29583004 0000000a 00000002 8f01aef0 
dee0: 8f01defc 8d67fd40 8d67fd74 8f01dfa4 0000000b 00000000 00030001 00000004 
df00: 8d676ee4 29746000 29746000 8805d970 00000004 8d676ee4 29746000 29746000 
df20: 8805d970 8f01df28 00002410 00000508 00000000 00000000 00000000 00000000 
df40: 29746000 8d67fd40 08100073 00000002 8f01df54 8802ef46 8f01df74 8f01df80 
df60: 8f01df44 29746000 8f01df6c 880115cc 8f01df8c 295f5000 29583004 00000000 
df80: 295f523c 88008140 8f01dfa4 000001bc 29583004 00000001 880080f0 880080f0 
dfa0: 8f01c000 00000040 00000000 00000020 29582e14 29574c18 29574dd0 00000000 
dfc0: 29574c18 29574c58 295832c8 00000001 00000001 29583004 000001bc 7beb0c7c 
dfe0: 7beb0c7c 295610de 29559810 00008100 2974a450 01f014c6 a13383fe ffffffff 

Call trace:
 [<8800eff6>] 0x8800eff6
 [<8800725e>] 0x8800725e
 [<880032c2>] 0x880032c2
 [<880066a6>] 0x880066a6
 [<88246362>] 0x88246362
 [<882463c0>] 0x882463c0
 [<8801ba74>] 0x8801ba74
 [<8801c068>] 0x8801c068
 [<88025c14>] 0x88025c14
 [<88005468>] 0x88005468
 [<88008140>] 0x88008140
 [<295610de>] 0x295610de


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-25  5:46 Yusuke Goda
2010-01-25 15:20 ` Paul Mundt
2010-01-26  8:33 ` Yusuke Goda
2010-01-26  8:54 ` Paul Mundt
2010-01-26  9:24 ` Yusuke Goda [this message]
2010-01-26  9:26 ` Paul Mundt
2010-01-26  9:42 ` Yusuke Goda
2010-02-02  7:00 ` Paul Mundt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B5EB4C5.7090301@renesas.com \
    --to=goda.yusuke@renesas.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-sh Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-sh/0 linux-sh/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-sh linux-sh/ https://lore.kernel.org/linux-sh \
		linux-sh@vger.kernel.org
	public-inbox-index linux-sh

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-sh


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git