[PATCH AUTOSEL 5.4 01/43] ARC: HSDK: wireup perf irq

[PATCH AUTOSEL 5.4 01/43] ARC: HSDK: wireup perf irq

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ]

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/hsdk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 9acbeba832c0b..5d64a5a940ee6 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -88,6 +88,8 @@ idu_intc: idu-interrupt-controller {
 
 	arcpct: pct {
 		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
 	};
 
 	/* TIMER0 with interrupt for clockevent */
-- 
2.25.1


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.4 19/43] irqchip/eznps: Fix build error for !ARC700 builds

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-eznps/include/plat/ctop.h | 1 -
 include/soc/nps/common.h                | 6 ++++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
index a4a61531c7fb9..77712c5ffe848 100644
--- a/arch/arc/plat-eznps/include/plat/ctop.h
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -33,7 +33,6 @@
 #define CTOP_AUX_DPC				(CTOP_AUX_BASE + 0x02C)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 
diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
index 9b1d43d671a3f..8c18dc6d3fde5 100644
--- a/include/soc/nps/common.h
+++ b/include/soc/nps/common.h
@@ -45,6 +45,12 @@
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM	0x00010422
 
+#ifndef AUX_IENABLE
+#define AUX_IENABLE				0x40c
+#endif
+
+#define CTOP_AUX_IACK				(0xFFFFF800 + 0x088)
+
 #ifndef __ASSEMBLY__
 
 /* In order to increase compilation test coverage */
-- 
2.25.1


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.4 34/43] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id

[Sasha Levin]

From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>

[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/hsdk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 5d64a5a940ee6..dcaa44e408ace 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -210,7 +210,7 @@ gmac: ethernet@8000 {
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
@@ -228,7 +228,7 @@ mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 					reg = <0>;
 				};
 			};
-- 
2.25.1


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc