* [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor
@ 2016-12-09 5:35 Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
0 siblings, 2 replies; 6+ messages in thread
From: Joel Holdsworth @ 2016-12-09 5:35 UTC (permalink / raw)
To: atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w,
robh-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-spi-u79uwXL29TY76Z2rM5mHXA, marex-ynQEQJNshbs
Cc: Joel Holdsworth
Lattice Semiconductor Corporation is a manufacturer of integrated
circuits and IP products, including low-power FPGAs, video connectivity
devices and millimeter wave wireless products.
Website: http://latticesemi.com
Signed-off-by: Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Acked-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Acked-by: Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 64fdc8c..7a87932 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -158,6 +158,7 @@ kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
+lattice Lattice Semiconductor
lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
2016-12-09 5:35 [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor Joel Holdsworth
@ 2016-12-09 5:35 ` Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
1 sibling, 0 replies; 6+ messages in thread
From: Joel Holdsworth @ 2016-12-09 5:35 UTC (permalink / raw)
To: atull, moritz.fischer, robh, devicetree, linux-kernel, linux-spi, marex
Cc: Joel Holdsworth
This adds documentation of the device tree bindings of the Lattice iCE40
FPGA driver for the FPGA manager framework.
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Marek Vasut <marex@denx.de>
---
.../bindings/fpga/lattice-ice40-fpga-mgr.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
new file mode 100644
index 0000000..7e7a78b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
@@ -0,0 +1,21 @@
+Lattice iCE40 FPGA Manager
+
+Required properties:
+- compatible: Should contain "lattice,ice40-fpga-mgr"
+- reg: SPI chip select
+- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000)
+- cdone-gpios: GPIO input connected to CDONE pin
+- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note
+ that unless the GPIO is held low during startup, the
+ FPGA will enter Master SPI mode and drive SCK with a
+ clock signal potentially jamming other devices on the
+ bus until the firmware is loaded.
+
+Example:
+ ice40: ice40@0 {
+ compatible = "lattice,ice40-fpga-mgr";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
2016-12-09 5:35 [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager Joel Holdsworth
@ 2016-12-09 5:35 ` Joel Holdsworth
[not found] ` <1481261749-15301-3-git-send-email-joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
1 sibling, 1 reply; 6+ messages in thread
From: Joel Holdsworth @ 2016-12-09 5:35 UTC (permalink / raw)
To: atull, moritz.fischer, robh, devicetree, linux-kernel, linux-spi, marex
Cc: Joel Holdsworth
The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
and very regular structure, designed for low-cost, high-volume consumer
and system applications.
This patch adds support to the FPGA manager for configuring the SRAM of
iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
UltraPlus devices, through slave SPI.
The iCE40 family is notable because it is the first FPGA family to have
complete reverse engineered bit-stream documentation for the iCE40LP and
iCE40HX devices. Furthermore, there is now a Free Software Verilog
synthesis tool-chain: the "IceStorm" tool-chain.
This project is the work of Clifford Wolf, who is the maintainer of
Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
contributions from "Cotton Seed", the main author of "arachne-pnr"; a
place-and-route tool for iCE40 FPGAs.
Having a Free Software synthesis tool-chain offers interesting
opportunities for embedded devices that are able reconfigure themselves
with open firmware that is generated on the device itself. For example
a mobile device might have an application processor with an iCE40 FPGA
attached, which implements slave devices, or through which the processor
communicates with other devices through the FPGA fabric.
A kernel driver for the iCE40 is useful, because in some cases, the FPGA
may need to be configured before other devices can be accessed.
An example of such a device is the icoBoard; a RaspberryPI HAT which
features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
Digilent-compatible PMOD modules. A PMOD module may contain a device
with which the kernel communicates, via the FPGA.
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
---
drivers/fpga/Kconfig | 6 ++
drivers/fpga/Makefile | 1 +
drivers/fpga/ice40-spi.c | 213 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 220 insertions(+)
create mode 100644 drivers/fpga/ice40-spi.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index ce861a2..967cda4 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -20,6 +20,12 @@ config FPGA_REGION
FPGA Regions allow loading FPGA images under control of
the Device Tree.
+config FPGA_MGR_ICE40_SPI
+ tristate "Lattice iCE40 SPI"
+ depends on OF && SPI
+ help
+ FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
+
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA || COMPILE_TEST
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8df07bc..cc0d364 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
new file mode 100644
index 0000000..3c99859
--- /dev/null
+++ b/drivers/fpga/ice40-spi.c
@@ -0,0 +1,213 @@
+/*
+ * FPGA Manager Driver for Lattice iCE40.
+ *
+ * Copyright (c) 2016 Joel Holdsworth
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This driver adds support to the FPGA manager for configuring the SRAM of
+ * Lattice iCE40 FPGAs through slave SPI.
+ */
+
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+
+#define ICE40_SPI_FPGAMGR_RESET_DELAY 1 /* us (>200ns) */
+#define ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY 1200 /* us */
+
+#define ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8)
+
+struct ice40_fpga_priv {
+ struct spi_device *dev;
+ struct gpio_desc *reset;
+ struct gpio_desc *cdone;
+};
+
+static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+
+ return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
+ FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+ struct spi_device *dev = priv->dev;
+ struct spi_message message;
+ struct spi_transfer assert_cs_then_reset_delay = {
+ .cs_change = 1,
+ .delay_usecs = ICE40_SPI_FPGAMGR_RESET_DELAY
+ };
+ struct spi_transfer housekeeping_delay_then_release_cs = {
+ .delay_usecs = ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY
+ };
+ int ret;
+
+ if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ dev_err(&dev->dev,
+ "Partial reconfiguration is not supported\n");
+ return -ENOTSUPP;
+ }
+
+ /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
+ spi_bus_lock(dev->master);
+
+ gpiod_set_value(priv->reset, 1);
+
+ spi_message_init(&message);
+ spi_message_add_tail(&assert_cs_then_reset_delay, &message);
+ ret = spi_sync_locked(dev, &message);
+
+ /* Come out of reset */
+ gpiod_set_value(priv->reset, 0);
+
+ /* Abort if the chip-select failed */
+ if (ret)
+ goto fail;
+
+ /* Check CDONE is de-asserted i.e. the FPGA is reset */
+ if (gpiod_get_value(priv->cdone)) {
+ dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
+ ret = -EIO;
+ goto fail;
+ }
+
+ /* Wait for the housekeeping to complete, and release SS_B */
+ spi_message_init(&message);
+ spi_message_add_tail(&housekeeping_delay_then_release_cs, &message);
+ ret = spi_sync_locked(dev, &message);
+
+fail:
+ spi_bus_unlock(dev->master);
+
+ return ret;
+}
+
+static int ice40_fpga_ops_write(struct fpga_manager *mgr,
+ const char *buf, size_t count)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+
+ return spi_write(priv->dev, buf, count);
+}
+
+static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+ struct spi_device *dev = priv->dev;
+ const u8 padding[ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES] = {0};
+
+ /* Check CDONE is asserted */
+ if (!gpiod_get_value(priv->cdone)) {
+ dev_err(&dev->dev,
+ "CDONE was not asserted after firmware transfer\n");
+ return -EIO;
+ }
+
+ /* Send of zero-padding to activate the firmware */
+ return spi_write(dev, padding, sizeof(padding));
+}
+
+static const struct fpga_manager_ops ice40_fpga_ops = {
+ .state = ice40_fpga_ops_state,
+ .write_init = ice40_fpga_ops_write_init,
+ .write = ice40_fpga_ops_write,
+ .write_complete = ice40_fpga_ops_write_complete,
+};
+
+static int ice40_fpga_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = spi->dev.of_node;
+ struct ice40_fpga_priv *priv;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "No Device Tree entry\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = spi;
+
+ /* Check board setup data. */
+ if (spi->max_speed_hz > 25000000) {
+ dev_err(dev, "Speed is too high\n");
+ return -EINVAL;
+ }
+
+ if (spi->max_speed_hz < 1000000) {
+ dev_err(dev, "Speed is too low\n");
+ return -EINVAL;
+ }
+
+ if (spi->mode & SPI_CPHA) {
+ dev_err(dev, "Bad mode\n");
+ return -EINVAL;
+ }
+
+ /* Set up the GPIOs */
+ priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
+ if (IS_ERR(priv->cdone)) {
+ dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
+ PTR_ERR(priv->cdone));
+ return -EINVAL;
+ }
+
+ priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset)) {
+ dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
+ PTR_ERR(priv->reset));
+ return -EINVAL;
+ }
+
+ /* Register with the FPGA manager */
+ ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
+ &ice40_fpga_ops, priv);
+ if (ret) {
+ dev_err(dev, "Unable to register FPGA manager");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ice40_fpga_remove(struct spi_device *spi)
+{
+ fpga_mgr_unregister(&spi->dev);
+ return 0;
+}
+
+static const struct of_device_id ice40_fpga_of_match[] = {
+ { .compatible = "lattice,ice40-fpga-mgr", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
+
+static struct spi_driver ice40_fpga_driver = {
+ .probe = ice40_fpga_probe,
+ .remove = ice40_fpga_remove,
+ .driver = {
+ .name = "ice40spi",
+ .of_match_table = of_match_ptr(ice40_fpga_of_match),
+ },
+};
+
+module_spi_driver(ice40_fpga_driver);
+
+MODULE_AUTHOR("Joel Holdsworth <joel@airwebreathe.org.uk>");
+MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
[not found] ` <1481261749-15301-3-git-send-email-joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
@ 2016-12-09 13:05 ` Marek Vasut
2016-12-09 15:50 ` Moritz Fischer
1 sibling, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2016-12-09 13:05 UTC (permalink / raw)
To: Joel Holdsworth, atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w,
robh-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-spi-u79uwXL29TY76Z2rM5mHXA
On 12/09/2016 06:35 AM, Joel Holdsworth wrote:
> The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
> and very regular structure, designed for low-cost, high-volume consumer
> and system applications.
>
> This patch adds support to the FPGA manager for configuring the SRAM of
> iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
> UltraPlus devices, through slave SPI.
>
> The iCE40 family is notable because it is the first FPGA family to have
> complete reverse engineered bit-stream documentation for the iCE40LP and
> iCE40HX devices. Furthermore, there is now a Free Software Verilog
> synthesis tool-chain: the "IceStorm" tool-chain.
>
> This project is the work of Clifford Wolf, who is the maintainer of
> Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
> contributions from "Cotton Seed", the main author of "arachne-pnr"; a
> place-and-route tool for iCE40 FPGAs.
>
> Having a Free Software synthesis tool-chain offers interesting
> opportunities for embedded devices that are able reconfigure themselves
> with open firmware that is generated on the device itself. For example
> a mobile device might have an application processor with an iCE40 FPGA
> attached, which implements slave devices, or through which the processor
> communicates with other devices through the FPGA fabric.
>
> A kernel driver for the iCE40 is useful, because in some cases, the FPGA
> may need to be configured before other devices can be accessed.
>
> An example of such a device is the icoBoard; a RaspberryPI HAT which
> features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
> Digilent-compatible PMOD modules. A PMOD module may contain a device
> with which the kernel communicates, via the FPGA.
>
> Signed-off-by: Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
--
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
[not found] ` <1481261749-15301-3-git-send-email-joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
2016-12-09 13:05 ` Marek Vasut
@ 2016-12-09 15:50 ` Moritz Fischer
[not found] ` <CAAtXAHcV+AG4en2U=KB0DeLa6RauC9ndojT=ffj+8hWtzS1o4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
1 sibling, 1 reply; 6+ messages in thread
From: Moritz Fischer @ 2016-12-09 15:50 UTC (permalink / raw)
To: Joel Holdsworth
Cc: Alan Tull, Rob Herring, Devicetree List,
Linux Kernel Mailing List, linux-spi-u79uwXL29TY76Z2rM5mHXA,
Marek Vašut
Joel,
A couple of minor nits below (none of them are real blockers), other
than that looks good.
On Thu, Dec 8, 2016 at 9:35 PM, Joel Holdsworth
<joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org> wrote:
> The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
> and very regular structure, designed for low-cost, high-volume consumer
> and system applications.
<snip>
> This patch adds support to the FPGA manager for configuring the SRAM of
> iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
> UltraPlus devices, through slave SPI.
</snip>
I think just this paragraph would be enough.
>
> The iCE40 family is notable because it is the first FPGA family to have
> complete reverse engineered bit-stream documentation for the iCE40LP and
> iCE40HX devices. Furthermore, there is now a Free Software Verilog
> synthesis tool-chain: the "IceStorm" tool-chain.
>
> This project is the work of Clifford Wolf, who is the maintainer of
> Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
> contributions from "Cotton Seed", the main author of "arachne-pnr"; a
> place-and-route tool for iCE40 FPGAs.
>
> Having a Free Software synthesis tool-chain offers interesting
> opportunities for embedded devices that are able reconfigure themselves
> with open firmware that is generated on the device itself. For example
> a mobile device might have an application processor with an iCE40 FPGA
> attached, which implements slave devices, or through which the processor
> communicates with other devices through the FPGA fabric.
>
> A kernel driver for the iCE40 is useful, because in some cases, the FPGA
> may need to be configured before other devices can be accessed.
>
> An example of such a device is the icoBoard; a RaspberryPI HAT which
> features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
> Digilent-compatible PMOD modules. A PMOD module may contain a device
> with which the kernel communicates, via the FPGA.
>
> Signed-off-by: Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
Modulo nits:
Reviewed-by: Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
> ---
> drivers/fpga/Kconfig | 6 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/ice40-spi.c | 213 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 220 insertions(+)
> create mode 100644 drivers/fpga/ice40-spi.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index ce861a2..967cda4 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -20,6 +20,12 @@ config FPGA_REGION
> FPGA Regions allow loading FPGA images under control of
> the Device Tree.
>
> +config FPGA_MGR_ICE40_SPI
> + tristate "Lattice iCE40 SPI"
> + depends on OF && SPI
> + help
> + FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
> +
> config FPGA_MGR_SOCFPGA
> tristate "Altera SOCFPGA FPGA Manager"
> depends on ARCH_SOCFPGA || COMPILE_TEST
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8df07bc..cc0d364 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_FPGA) += fpga-mgr.o
>
> # FPGA Manager Drivers
> +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
> obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
> obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
> obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
> new file mode 100644
> index 0000000..3c99859
> --- /dev/null
> +++ b/drivers/fpga/ice40-spi.c
> @@ -0,0 +1,213 @@
> +/*
> + * FPGA Manager Driver for Lattice iCE40.
> + *
> + * Copyright (c) 2016 Joel Holdsworth
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This driver adds support to the FPGA manager for configuring the SRAM of
> + * Lattice iCE40 FPGAs through slave SPI.
> + */
> +
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/spi/spi.h>
> +
> +#define ICE40_SPI_FPGAMGR_RESET_DELAY 1 /* us (>200ns) */
> +#define ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY 1200 /* us */
> +
> +#define ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8)
> +
> +struct ice40_fpga_priv {
> + struct spi_device *dev;
> + struct gpio_desc *reset;
> + struct gpio_desc *cdone;
> +};
> +
> +static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> +
> + return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
> + FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + const char *buf, size_t count)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> + struct spi_message message;
> + struct spi_transfer assert_cs_then_reset_delay = {
> + .cs_change = 1,
> + .delay_usecs = ICE40_SPI_FPGAMGR_RESET_DELAY
> + };
> + struct spi_transfer housekeeping_delay_then_release_cs = {
> + .delay_usecs = ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY
> + };
> + int ret;
> +
> + if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> + dev_err(&dev->dev,
> + "Partial reconfiguration is not supported\n");
> + return -ENOTSUPP;
> + }
> +
> + /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
> + spi_bus_lock(dev->master);
> +
> + gpiod_set_value(priv->reset, 1);
> +
> + spi_message_init(&message);
> + spi_message_add_tail(&assert_cs_then_reset_delay, &message);
> + ret = spi_sync_locked(dev, &message);
> +
> + /* Come out of reset */
> + gpiod_set_value(priv->reset, 0);
> +
> + /* Abort if the chip-select failed */
> + if (ret)
> + goto fail;
> +
> + /* Check CDONE is de-asserted i.e. the FPGA is reset */
> + if (gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
> + ret = -EIO;
> + goto fail;
> + }
> +
> + /* Wait for the housekeeping to complete, and release SS_B */
> + spi_message_init(&message);
> + spi_message_add_tail(&housekeeping_delay_then_release_cs, &message);
> + ret = spi_sync_locked(dev, &message);
> +
> +fail:
> + spi_bus_unlock(dev->master);
> +
> + return ret;
> +}
> +
> +static int ice40_fpga_ops_write(struct fpga_manager *mgr,
> + const char *buf, size_t count)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> +
> + return spi_write(priv->dev, buf, count);
> +}
> +
> +static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr,
> + struct fpga_image_info *info)
> +{
> + struct ice40_fpga_priv *priv = mgr->priv;
> + struct spi_device *dev = priv->dev;
> + const u8 padding[ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES] = {0};
> +
> + /* Check CDONE is asserted */
> + if (!gpiod_get_value(priv->cdone)) {
> + dev_err(&dev->dev,
> + "CDONE was not asserted after firmware transfer\n");
> + return -EIO;
> + }
> +
> + /* Send of zero-padding to activate the firmware */
> + return spi_write(dev, padding, sizeof(padding));
> +}
> +
> +static const struct fpga_manager_ops ice40_fpga_ops = {
> + .state = ice40_fpga_ops_state,
> + .write_init = ice40_fpga_ops_write_init,
> + .write = ice40_fpga_ops_write,
> + .write_complete = ice40_fpga_ops_write_complete,
> +};
> +
> +static int ice40_fpga_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct device_node *np = spi->dev.of_node;
> + struct ice40_fpga_priv *priv;
> + int ret;
> +
> + if (!np) {
> + dev_err(dev, "No Device Tree entry\n");
> + return -EINVAL;
> + }
> +
> + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = spi;
> +
> + /* Check board setup data. */
> + if (spi->max_speed_hz > 25000000) {
> + dev_err(dev, "Speed is too high\n");
Speed is too high, maximum speed is X. Maybe make it a ICE40_SPI_MAX_SPEED
> + return -EINVAL;
> + }
> +
> + if (spi->max_speed_hz < 1000000) {
> + dev_err(dev, "Speed is too low\n");
Speed is too low, minimum speed is X. Maybe make it a ICE40_SPI_MIN_SPEED
> + return -EINVAL;
> + }
> +
> + if (spi->mode & SPI_CPHA) {
> + dev_err(dev, "Bad mode\n");
'Bad mode, SPI_CPHA not supported' mabye.
> + return -EINVAL;
> + }
> +
> + /* Set up the GPIOs */
> + priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
> + if (IS_ERR(priv->cdone)) {
> + dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
> + PTR_ERR(priv->cdone));
> + return -EINVAL;
> + }
> +
> + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset)) {
> + dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
> + PTR_ERR(priv->reset));
> + return -EINVAL;
> + }
> +
> + /* Register with the FPGA manager */
> + ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
> + &ice40_fpga_ops, priv);
> + if (ret) {
> + dev_err(dev, "Unable to register FPGA manager");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ice40_fpga_remove(struct spi_device *spi)
> +{
> + fpga_mgr_unregister(&spi->dev);
> + return 0;
> +}
> +
> +static const struct of_device_id ice40_fpga_of_match[] = {
> + { .compatible = "lattice,ice40-fpga-mgr", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
> +
> +static struct spi_driver ice40_fpga_driver = {
> + .probe = ice40_fpga_probe,
> + .remove = ice40_fpga_remove,
> + .driver = {
> + .name = "ice40spi",
> + .of_match_table = of_match_ptr(ice40_fpga_of_match),
> + },
> +};
> +
> +module_spi_driver(ice40_fpga_driver);
> +
> +MODULE_AUTHOR("Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>");
> +MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
Thanks,
Moritz
PS: can you also Cc linux-fpga mailing list in the future?
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
[not found] ` <CAAtXAHcV+AG4en2U=KB0DeLa6RauC9ndojT=ffj+8hWtzS1o4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2016-12-14 15:40 ` Alan Tull
0 siblings, 0 replies; 6+ messages in thread
From: Alan Tull @ 2016-12-14 15:40 UTC (permalink / raw)
To: Moritz Fischer
Cc: Joel Holdsworth, Alan Tull, Rob Herring, Devicetree List,
Linux Kernel Mailing List, linux-spi-u79uwXL29TY76Z2rM5mHXA,
Marek Vašut
On Fri, 9 Dec 2016, Moritz Fischer wrote:
> Joel,
>
> A couple of minor nits below (none of them are real blockers), other
> than that looks good.
>
> On Thu, Dec 8, 2016 at 9:35 PM, Joel Holdsworth
> <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org> wrote:
> > The Lattice iCE40 is a family of FPGAs with a minimalistic architecture
> > and very regular structure, designed for low-cost, high-volume consumer
> > and system applications.
>
> <snip>
>
> > This patch adds support to the FPGA manager for configuring the SRAM of
> > iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
> > UltraPlus devices, through slave SPI.
>
> </snip>
>
> I think just this paragraph would be enough.
With these changes,
Acked-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Thanks,
Alan
> >
> > The iCE40 family is notable because it is the first FPGA family to have
> > complete reverse engineered bit-stream documentation for the iCE40LP and
> > iCE40HX devices. Furthermore, there is now a Free Software Verilog
> > synthesis tool-chain: the "IceStorm" tool-chain.
> >
> > This project is the work of Clifford Wolf, who is the maintainer of
> > Yosys Verilog RTL synthesis framework, and Mathias Lasser, with notable
> > contributions from "Cotton Seed", the main author of "arachne-pnr"; a
> > place-and-route tool for iCE40 FPGAs.
> >
> > Having a Free Software synthesis tool-chain offers interesting
> > opportunities for embedded devices that are able reconfigure themselves
> > with open firmware that is generated on the device itself. For example
> > a mobile device might have an application processor with an iCE40 FPGA
> > attached, which implements slave devices, or through which the processor
> > communicates with other devices through the FPGA fabric.
> >
> > A kernel driver for the iCE40 is useful, because in some cases, the FPGA
> > may need to be configured before other devices can be accessed.
> >
> > An example of such a device is the icoBoard; a RaspberryPI HAT which
> > features an iCE40HX8K with a 1 or 8 MBit SRAM and ports for
> > Digilent-compatible PMOD modules. A PMOD module may contain a device
> > with which the kernel communicates, via the FPGA.
> >
> > Signed-off-by: Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
> Modulo nits:
>
> Reviewed-by: Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
>
> > ---
> > drivers/fpga/Kconfig | 6 ++
> > drivers/fpga/Makefile | 1 +
> > drivers/fpga/ice40-spi.c | 213 +++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 220 insertions(+)
> > create mode 100644 drivers/fpga/ice40-spi.c
> >
> > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> > index ce861a2..967cda4 100644
> > --- a/drivers/fpga/Kconfig
> > +++ b/drivers/fpga/Kconfig
> > @@ -20,6 +20,12 @@ config FPGA_REGION
> > FPGA Regions allow loading FPGA images under control of
> > the Device Tree.
> >
> > +config FPGA_MGR_ICE40_SPI
> > + tristate "Lattice iCE40 SPI"
> > + depends on OF && SPI
> > + help
> > + FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
> > +
> > config FPGA_MGR_SOCFPGA
> > tristate "Altera SOCFPGA FPGA Manager"
> > depends on ARCH_SOCFPGA || COMPILE_TEST
> > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> > index 8df07bc..cc0d364 100644
> > --- a/drivers/fpga/Makefile
> > +++ b/drivers/fpga/Makefile
> > @@ -6,6 +6,7 @@
> > obj-$(CONFIG_FPGA) += fpga-mgr.o
> >
> > # FPGA Manager Drivers
> > +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
> > obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
> > obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
> > obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> > diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
> > new file mode 100644
> > index 0000000..3c99859
> > --- /dev/null
> > +++ b/drivers/fpga/ice40-spi.c
> > @@ -0,0 +1,213 @@
> > +/*
> > + * FPGA Manager Driver for Lattice iCE40.
> > + *
> > + * Copyright (c) 2016 Joel Holdsworth
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; version 2 of the License.
> > + *
> > + * This driver adds support to the FPGA manager for configuring the SRAM of
> > + * Lattice iCE40 FPGAs through slave SPI.
> > + */
> > +
> > +#include <linux/fpga/fpga-mgr.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#define ICE40_SPI_FPGAMGR_RESET_DELAY 1 /* us (>200ns) */
> > +#define ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY 1200 /* us */
> > +
> > +#define ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8)
> > +
> > +struct ice40_fpga_priv {
> > + struct spi_device *dev;
> > + struct gpio_desc *reset;
> > + struct gpio_desc *cdone;
> > +};
> > +
> > +static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
> > +{
> > + struct ice40_fpga_priv *priv = mgr->priv;
> > +
> > + return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
> > + FPGA_MGR_STATE_UNKNOWN;
> > +}
> > +
> > +static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
> > + struct fpga_image_info *info,
> > + const char *buf, size_t count)
> > +{
> > + struct ice40_fpga_priv *priv = mgr->priv;
> > + struct spi_device *dev = priv->dev;
> > + struct spi_message message;
> > + struct spi_transfer assert_cs_then_reset_delay = {
> > + .cs_change = 1,
> > + .delay_usecs = ICE40_SPI_FPGAMGR_RESET_DELAY
> > + };
> > + struct spi_transfer housekeeping_delay_then_release_cs = {
> > + .delay_usecs = ICE40_SPI_FPGAMGR_HOUSEKEEPING_DELAY
> > + };
> > + int ret;
> > +
> > + if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
> > + dev_err(&dev->dev,
> > + "Partial reconfiguration is not supported\n");
> > + return -ENOTSUPP;
> > + }
> > +
> > + /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
> > + spi_bus_lock(dev->master);
> > +
> > + gpiod_set_value(priv->reset, 1);
> > +
> > + spi_message_init(&message);
> > + spi_message_add_tail(&assert_cs_then_reset_delay, &message);
> > + ret = spi_sync_locked(dev, &message);
> > +
> > + /* Come out of reset */
> > + gpiod_set_value(priv->reset, 0);
> > +
> > + /* Abort if the chip-select failed */
> > + if (ret)
> > + goto fail;
> > +
> > + /* Check CDONE is de-asserted i.e. the FPGA is reset */
> > + if (gpiod_get_value(priv->cdone)) {
> > + dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
> > + ret = -EIO;
> > + goto fail;
> > + }
> > +
> > + /* Wait for the housekeeping to complete, and release SS_B */
> > + spi_message_init(&message);
> > + spi_message_add_tail(&housekeeping_delay_then_release_cs, &message);
> > + ret = spi_sync_locked(dev, &message);
> > +
> > +fail:
> > + spi_bus_unlock(dev->master);
> > +
> > + return ret;
> > +}
> > +
> > +static int ice40_fpga_ops_write(struct fpga_manager *mgr,
> > + const char *buf, size_t count)
> > +{
> > + struct ice40_fpga_priv *priv = mgr->priv;
> > +
> > + return spi_write(priv->dev, buf, count);
> > +}
> > +
> > +static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr,
> > + struct fpga_image_info *info)
> > +{
> > + struct ice40_fpga_priv *priv = mgr->priv;
> > + struct spi_device *dev = priv->dev;
> > + const u8 padding[ICE40_SPI_FPGAMGR_NUM_ACTIVATION_BYTES] = {0};
> > +
> > + /* Check CDONE is asserted */
> > + if (!gpiod_get_value(priv->cdone)) {
> > + dev_err(&dev->dev,
> > + "CDONE was not asserted after firmware transfer\n");
> > + return -EIO;
> > + }
> > +
> > + /* Send of zero-padding to activate the firmware */
> > + return spi_write(dev, padding, sizeof(padding));
> > +}
> > +
> > +static const struct fpga_manager_ops ice40_fpga_ops = {
> > + .state = ice40_fpga_ops_state,
> > + .write_init = ice40_fpga_ops_write_init,
> > + .write = ice40_fpga_ops_write,
> > + .write_complete = ice40_fpga_ops_write_complete,
> > +};
> > +
> > +static int ice40_fpga_probe(struct spi_device *spi)
> > +{
> > + struct device *dev = &spi->dev;
> > + struct device_node *np = spi->dev.of_node;
> > + struct ice40_fpga_priv *priv;
> > + int ret;
> > +
> > + if (!np) {
> > + dev_err(dev, "No Device Tree entry\n");
> > + return -EINVAL;
> > + }
> > +
> > + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->dev = spi;
> > +
> > + /* Check board setup data. */
> > + if (spi->max_speed_hz > 25000000) {
> > + dev_err(dev, "Speed is too high\n");
>
> Speed is too high, maximum speed is X. Maybe make it a ICE40_SPI_MAX_SPEED
> > + return -EINVAL;
> > + }
> > +
> > + if (spi->max_speed_hz < 1000000) {
> > + dev_err(dev, "Speed is too low\n");
>
> Speed is too low, minimum speed is X. Maybe make it a ICE40_SPI_MIN_SPEED
> > + return -EINVAL;
> > + }
> > +
> > + if (spi->mode & SPI_CPHA) {
> > + dev_err(dev, "Bad mode\n");
>
> 'Bad mode, SPI_CPHA not supported' mabye.
> > + return -EINVAL;
> > + }
> > +
> > + /* Set up the GPIOs */
> > + priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
> > + if (IS_ERR(priv->cdone)) {
> > + dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
> > + PTR_ERR(priv->cdone));
> > + return -EINVAL;
> > + }
> > +
> > + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> > + if (IS_ERR(priv->reset)) {
> > + dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
> > + PTR_ERR(priv->reset));
> > + return -EINVAL;
> > + }
> > +
> > + /* Register with the FPGA manager */
> > + ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
> > + &ice40_fpga_ops, priv);
> > + if (ret) {
> > + dev_err(dev, "Unable to register FPGA manager");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int ice40_fpga_remove(struct spi_device *spi)
> > +{
> > + fpga_mgr_unregister(&spi->dev);
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id ice40_fpga_of_match[] = {
> > + { .compatible = "lattice,ice40-fpga-mgr", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
> > +
> > +static struct spi_driver ice40_fpga_driver = {
> > + .probe = ice40_fpga_probe,
> > + .remove = ice40_fpga_remove,
> > + .driver = {
> > + .name = "ice40spi",
> > + .of_match_table = of_match_ptr(ice40_fpga_of_match),
> > + },
> > +};
> > +
> > +module_spi_driver(ice40_fpga_driver);
> > +
> > +MODULE_AUTHOR("Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>");
> > +MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
> >
>
> Thanks,
>
> Moritz
>
> PS: can you also Cc linux-fpga mailing list in the future?
>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-12-14 15:40 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-09 5:35 [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager Joel Holdsworth
2016-12-09 5:35 ` [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs Joel Holdsworth
[not found] ` <1481261749-15301-3-git-send-email-joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
2016-12-09 13:05 ` Marek Vasut
2016-12-09 15:50 ` Moritz Fischer
[not found] ` <CAAtXAHcV+AG4en2U=KB0DeLa6RauC9ndojT=ffj+8hWtzS1o4w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-14 15:40 ` Alan Tull
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).