mfd: mc13xxx: add I2C support, V2

mfd: mc13xxx: add I2C support, V2

[Marc Reilly]

Hi,                                                                                                                            

This series (based on Samuel's mfd-2.6/for-next) adds I2C support for the
mc13xxx family PMICs. Thanks to Oscar for adding dt support for the I2C driver.                       

V2 lets both I2C and SPI support be enabled at the same time and limits the 
scope of common definitions by using a private include header rather than global
one.
The only issue from V1 [0] not addressed is the use of regmap - mainly, I don't
have the time. I accept that this is a lame excuse but hope that use of regmap 
can come later if it is required.

Cheers,
Marc                        

[0] http://www.spinics.net/lists/linux-i2c/msg06992.html


------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

[PATCH v2 1/3] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.

[Marc Reilly]

This patch abstracts the bus specific operations from the driver core.
Read and write handlers are introduced and generic initialization is
consolidated into mc13xxx_comon_init. The irq member is removed because
it is unused.

Signed-off-by: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org>
---
 drivers/mfd/mc13xxx-core.c |  162 ++++++++++++++++++++++++++------------------
 1 files changed, 97 insertions(+), 65 deletions(-)

diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7122386..19d94a1 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -22,12 +22,24 @@
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 
+enum mc13xxx_id {
+	MC13XXX_ID_MC13783,
+	MC13XXX_ID_MC13892,
+	MC13XXX_ID_INVALID,
+};
+
 struct mc13xxx {
 	struct spi_device *spidev;
+
+	struct device *dev;
+	enum mc13xxx_id ictype;
+
 	struct mutex lock;
-	int irq;
 	int flags;
 
+	int (*read_dev)(struct mc13xxx *, unsigned int, u32 *);
+	int (*write_dev)(struct mc13xxx *, unsigned int, u32);
+
 	irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
 	void *irqdata[MC13XXX_NUM_IRQ];
 
@@ -144,36 +156,32 @@ struct mc13xxx {
 void mc13xxx_lock(struct mc13xxx *mc13xxx)
 {
 	if (!mutex_trylock(&mc13xxx->lock)) {
-		dev_dbg(&mc13xxx->spidev->dev, "wait for %s from %pf\n",
+		dev_dbg(mc13xxx->dev, "wait for %s from %pf\n",
 				__func__, __builtin_return_address(0));
 
 		mutex_lock(&mc13xxx->lock);
 	}
-	dev_dbg(&mc13xxx->spidev->dev, "%s from %pf\n",
+	dev_dbg(mc13xxx->dev, "%s from %pf\n",
 			__func__, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(mc13xxx_lock);
 
 void mc13xxx_unlock(struct mc13xxx *mc13xxx)
 {
-	dev_dbg(&mc13xxx->spidev->dev, "%s from %pf\n",
+	dev_dbg(mc13xxx->dev, "%s from %pf\n",
 			__func__, __builtin_return_address(0));
 	mutex_unlock(&mc13xxx->lock);
 }
 EXPORT_SYMBOL(mc13xxx_unlock);
 
 #define MC13XXX_REGOFFSET_SHIFT 25
-int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
+static int mc13xxx_spi_reg_read(struct mc13xxx *mc13xxx,
+				unsigned int offset, u32 *val)
 {
 	struct spi_transfer t;
 	struct spi_message m;
 	int ret;
 
-	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
-
-	if (offset > MC13XXX_NUMREGS)
-		return -EINVAL;
-
 	*val = offset << MC13XXX_REGOFFSET_SHIFT;
 
 	memset(&t, 0, sizeof(t));
@@ -195,26 +203,17 @@ int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
 
 	*val &= 0xffffff;
 
-	dev_vdbg(&mc13xxx->spidev->dev, "[0x%02x] -> 0x%06x\n", offset, *val);
-
 	return 0;
 }
-EXPORT_SYMBOL(mc13xxx_reg_read);
 
-int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
+static int mc13xxx_spi_reg_write(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 val)
 {
 	u32 buf;
 	struct spi_transfer t;
 	struct spi_message m;
 	int ret;
 
-	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
-
-	dev_vdbg(&mc13xxx->spidev->dev, "[0x%02x] <- 0x%06x\n", offset, val);
-
-	if (offset > MC13XXX_NUMREGS || val > 0xffffff)
-		return -EINVAL;
-
 	buf = 1 << 31 | offset << MC13XXX_REGOFFSET_SHIFT | val;
 
 	memset(&t, 0, sizeof(t));
@@ -235,6 +234,34 @@ int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
 
 	return 0;
 }
+
+int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
+{
+	int ret;
+
+	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
+
+	if (offset > MC13XXX_NUMREGS)
+		return -EINVAL;
+
+	ret = mc13xxx->read_dev(mc13xxx, offset, val);
+	dev_vdbg(mc13xxx->dev, "[0x%02x] -> 0x%06x\n", offset, *val);
+
+	return ret;
+}
+EXPORT_SYMBOL(mc13xxx_reg_read);
+
+int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
+{
+	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
+
+	dev_vdbg(mc13xxx->dev, "[0x%02x] <- 0x%06x\n", offset, val);
+
+	if (offset > MC13XXX_NUMREGS || val > 0xffffff)
+		return -EINVAL;
+
+	return mc13xxx->write_dev(mc13xxx, offset, val);
+}
 EXPORT_SYMBOL(mc13xxx_reg_write);
 
 int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset,
@@ -439,7 +466,7 @@ static int mc13xxx_irq_handle(struct mc13xxx *mc13xxx,
 			if (handled == IRQ_HANDLED)
 				num_handled++;
 		} else {
-			dev_err(&mc13xxx->spidev->dev,
+			dev_err(mc13xxx->dev,
 					"BUG: irq %u but no handler\n",
 					baseirq + irq);
 
@@ -475,25 +502,23 @@ static irqreturn_t mc13xxx_irq_thread(int irq, void *data)
 	return IRQ_RETVAL(handled);
 }
 
-enum mc13xxx_id {
-	MC13XXX_ID_MC13783,
-	MC13XXX_ID_MC13892,
-	MC13XXX_ID_INVALID,
-};
-
 static const char *mc13xxx_chipname[] = {
 	[MC13XXX_ID_MC13783] = "mc13783",
 	[MC13XXX_ID_MC13892] = "mc13892",
 };
 
 #define maskval(reg, mask)	(((reg) & (mask)) >> __ffs(mask))
-static int mc13xxx_identify(struct mc13xxx *mc13xxx, enum mc13xxx_id *id)
+static int mc13xxx_identify(struct mc13xxx *mc13xxx)
 {
 	u32 icid;
 	u32 revision;
-	const char *name;
 	int ret;
 
+	/*
+	 * Get the generation ID from register 46, as apparently some older
+	 * IC revisions only have this info at this location. Newer ICs seem to
+	 * have both.
+	 */
 	ret = mc13xxx_reg_read(mc13xxx, 46, &icid);
 	if (ret)
 		return ret;
@@ -502,26 +527,23 @@ static int mc13xxx_identify(struct mc13xxx *mc13xxx, enum mc13xxx_id *id)
 
 	switch (icid) {
 	case 2:
-		*id = MC13XXX_ID_MC13783;
-		name = "mc13783";
+		mc13xxx->ictype = MC13XXX_ID_MC13783;
 		break;
 	case 7:
-		*id = MC13XXX_ID_MC13892;
-		name = "mc13892";
+		mc13xxx->ictype = MC13XXX_ID_MC13892;
 		break;
 	default:
-		*id = MC13XXX_ID_INVALID;
+		mc13xxx->ictype = MC13XXX_ID_INVALID;
 		break;
 	}
 
-	if (*id == MC13XXX_ID_MC13783 || *id == MC13XXX_ID_MC13892) {
+	if (mc13xxx->ictype == MC13XXX_ID_MC13783 ||
+			mc13xxx->ictype == MC13XXX_ID_MC13892) {
 		ret = mc13xxx_reg_read(mc13xxx, MC13XXX_REVISION, &revision);
-		if (ret)
-			return ret;
 
-		dev_info(&mc13xxx->spidev->dev, "%s: rev: %d.%d, "
+		dev_info(mc13xxx->dev, "%s: rev: %d.%d, "
 				"fin: %d, fab: %d, icid: %d/%d\n",
-				mc13xxx_chipname[*id],
+				mc13xxx_chipname[mc13xxx->ictype],
 				maskval(revision, MC13XXX_REVISION_REVFULL),
 				maskval(revision, MC13XXX_REVISION_REVMETAL),
 				maskval(revision, MC13XXX_REVISION_FIN),
@@ -530,26 +552,12 @@ static int mc13xxx_identify(struct mc13xxx *mc13xxx, enum mc13xxx_id *id)
 				maskval(revision, MC13XXX_REVISION_ICIDCODE));
 	}
 
-	if (*id != MC13XXX_ID_INVALID) {
-		const struct spi_device_id *devid =
-			spi_get_device_id(mc13xxx->spidev);
-		if (!devid || devid->driver_data != *id)
-			dev_warn(&mc13xxx->spidev->dev, "device id doesn't "
-					"match auto detection!\n");
-	}
-
-	return 0;
+	return (mc13xxx->ictype == MC13XXX_ID_INVALID) ? -ENODEV : 0;
 }
 
 static const char *mc13xxx_get_chipname(struct mc13xxx *mc13xxx)
 {
-	const struct spi_device_id *devid =
-		spi_get_device_id(mc13xxx->spidev);
-
-	if (!devid)
-		return NULL;
-
-	return mc13xxx_chipname[devid->driver_data];
+	return mc13xxx_chipname[mc13xxx->ictype];
 }
 
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
@@ -589,7 +597,7 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 	};
 	init_completion(&adcdone_data.done);
 
-	dev_dbg(&mc13xxx->spidev->dev, "%s\n", __func__);
+	dev_dbg(mc13xxx->dev, "%s\n", __func__);
 
 	mc13xxx_lock(mc13xxx);
 
@@ -631,7 +639,7 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		return -EINVAL;
 	}
 
-	dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
+	dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__);
 	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
 			mc13xxx_handler_adcdone, __func__, &adcdone_data);
 	mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_ADCDONE);
@@ -689,7 +697,7 @@ static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx,
 	if (!cell.name)
 		return -ENOMEM;
 
-	return mfd_add_devices(&mc13xxx->spidev->dev, -1, &cell, 1, NULL, 0);
+	return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0);
 }
 
 static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
@@ -700,7 +708,7 @@ static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
 #ifdef CONFIG_OF
 static int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
 {
-	struct device_node *np = mc13xxx->spidev->dev.of_node;
+	struct device_node *np = mc13xxx->dev.of_node;
 
 	if (!np)
 		return -ENODEV;
@@ -746,13 +754,15 @@ static const struct of_device_id mc13xxx_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
 
+static int mc13xxx_common_init(struct mc13xxx *mc13xxx,
+		struct mc13xxx_platform_data *pdata, int irq);
+
 static int mc13xxx_probe(struct spi_device *spi)
 {
 	const struct of_device_id *of_id;
 	struct spi_driver *sdrv = to_spi_driver(spi->dev.driver);
 	struct mc13xxx *mc13xxx;
 	struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
-	enum mc13xxx_id id;
 	int ret;
 
 	of_id = of_match_device(mc13xxx_dt_ids, &spi->dev);
@@ -768,13 +778,36 @@ static int mc13xxx_probe(struct spi_device *spi)
 	spi->bits_per_word = 32;
 	spi_setup(spi);
 
+	mc13xxx->dev = &spi->dev;
 	mc13xxx->spidev = spi;
+	mc13xxx->read_dev = mc13xxx_spi_reg_read;
+	mc13xxx->write_dev = mc13xxx_spi_reg_write;
+
+	ret = mc13xxx_common_init(mc13xxx, pdata, spi->irq);
+
+	if (ret) {
+		dev_set_drvdata(&spi->dev, NULL);
+	} else {
+		const struct spi_device_id *devid =
+			spi_get_device_id(mc13xxx->spidev);
+		if (!devid || devid->driver_data != mc13xxx->ictype)
+			dev_warn(mc13xxx->dev,
+				"device id doesn't match auto detection!\n");
+	}
+
+	return ret;
+}
+
+static int mc13xxx_common_init(struct mc13xxx *mc13xxx,
+		struct mc13xxx_platform_data *pdata, int irq)
+{
+	int ret;
 
 	mutex_init(&mc13xxx->lock);
 	mc13xxx_lock(mc13xxx);
 
-	ret = mc13xxx_identify(mc13xxx, &id);
-	if (ret || id == MC13XXX_ID_INVALID)
+	ret = mc13xxx_identify(mc13xxx);
+	if (ret)
 		goto err_revision;
 
 	/* mask all irqs */
@@ -786,14 +819,13 @@ static int mc13xxx_probe(struct spi_device *spi)
 	if (ret)
 		goto err_mask;
 
-	ret = request_threaded_irq(spi->irq, NULL, mc13xxx_irq_thread,
+	ret = request_threaded_irq(irq, NULL, mc13xxx_irq_thread,
 			IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx);
 
 	if (ret) {
 err_mask:
 err_revision:
 		mc13xxx_unlock(mc13xxx);
-		dev_set_drvdata(&spi->dev, NULL);
 		kfree(mc13xxx);
 		return ret;
 	}
-- 
1.7.3.4


------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

[PATCH v2 2/3] mfd: mc13xxx-core: Move spi specific code into separate module.

[Marc Reilly]

All spi specific code is moved into a new module. The mc13xxx
struct moves to a new local include file by necessity.

A new config choice selects the SPI bus type support and by default is
value of SPI_MASTER to remain compatible with existing configs.

Signed-off-by: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org>
---
 drivers/mfd/Kconfig        |   15 +++-
 drivers/mfd/Makefile       |    1 +
 drivers/mfd/mc13xxx-core.c |  189 +-------------------------------------------
 drivers/mfd/mc13xxx-spi.c  |  187 +++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/mc13xxx.h      |   42 ++++++++++
 5 files changed, 245 insertions(+), 189 deletions(-)
 create mode 100644 drivers/mfd/mc13xxx-spi.c
 create mode 100644 drivers/mfd/mc13xxx.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index cd13e9f..501fee5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -577,12 +577,21 @@ config MFD_MC13XXX
 	select MFD_CORE
 	select MFD_MC13783
 	help
-	  Support for the Freescale (Atlas) PMIC and audio CODECs
-	  MC13783 and MC13892.
-	  This driver provides common support for accessing  the device,
+	  Enable support for the Freescale MC13783 and MC13892 PMICs.
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+if MFD_MC13XXX
+
+config MFD_MC13XXX_SPI
+	tristate "MC13xxx SPI interface" if SPI_MASTER
+	default SPI_MASTER
+	help
+	  Select this if your MC13xxx is connected via an SPI bus.
+
+endif
+
 config ABX500_CORE
 	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 	default y if ARCH_U300 || ARCH_U8500
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b953bab..2dc66ed 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_TWL6030_PWM)	+= twl6030-pwm.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040-core.o twl6040-irq.o
 
 obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
+obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 19d94a1..4dca8bb 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -15,36 +15,13 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/interrupt.h>
-#include <linux/spi/spi.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/mc13xxx.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 
-enum mc13xxx_id {
-	MC13XXX_ID_MC13783,
-	MC13XXX_ID_MC13892,
-	MC13XXX_ID_INVALID,
-};
-
-struct mc13xxx {
-	struct spi_device *spidev;
-
-	struct device *dev;
-	enum mc13xxx_id ictype;
-
-	struct mutex lock;
-	int flags;
-
-	int (*read_dev)(struct mc13xxx *, unsigned int, u32 *);
-	int (*write_dev)(struct mc13xxx *, unsigned int, u32);
-
-	irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
-	void *irqdata[MC13XXX_NUM_IRQ];
-
-	int adcflags;
-};
+#include "mc13xxx.h"
 
 #define MC13XXX_IRQSTAT0	0
 #define MC13XXX_IRQSTAT0_ADCDONEI	(1 << 0)
@@ -174,67 +151,6 @@ void mc13xxx_unlock(struct mc13xxx *mc13xxx)
 }
 EXPORT_SYMBOL(mc13xxx_unlock);
 
-#define MC13XXX_REGOFFSET_SHIFT 25
-static int mc13xxx_spi_reg_read(struct mc13xxx *mc13xxx,
-				unsigned int offset, u32 *val)
-{
-	struct spi_transfer t;
-	struct spi_message m;
-	int ret;
-
-	*val = offset << MC13XXX_REGOFFSET_SHIFT;
-
-	memset(&t, 0, sizeof(t));
-
-	t.tx_buf = val;
-	t.rx_buf = val;
-	t.len = sizeof(u32);
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t, &m);
-
-	ret = spi_sync(mc13xxx->spidev, &m);
-
-	/* error in message.status implies error return from spi_sync */
-	BUG_ON(!ret && m.status);
-
-	if (ret)
-		return ret;
-
-	*val &= 0xffffff;
-
-	return 0;
-}
-
-static int mc13xxx_spi_reg_write(struct mc13xxx *mc13xxx, unsigned int offset,
-		u32 val)
-{
-	u32 buf;
-	struct spi_transfer t;
-	struct spi_message m;
-	int ret;
-
-	buf = 1 << 31 | offset << MC13XXX_REGOFFSET_SHIFT | val;
-
-	memset(&t, 0, sizeof(t));
-
-	t.tx_buf = &buf;
-	t.rx_buf = &buf;
-	t.len = sizeof(u32);
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t, &m);
-
-	ret = spi_sync(mc13xxx->spidev, &m);
-
-	BUG_ON(!ret && m.status);
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
 {
 	int ret;
@@ -734,71 +650,7 @@ static inline int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
 }
 #endif
 
-static const struct spi_device_id mc13xxx_device_id[] = {
-	{
-		.name = "mc13783",
-		.driver_data = MC13XXX_ID_MC13783,
-	}, {
-		.name = "mc13892",
-		.driver_data = MC13XXX_ID_MC13892,
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(spi, mc13xxx_device_id);
-
-static const struct of_device_id mc13xxx_dt_ids[] = {
-	{ .compatible = "fsl,mc13783", .data = (void *) MC13XXX_ID_MC13783, },
-	{ .compatible = "fsl,mc13892", .data = (void *) MC13XXX_ID_MC13892, },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
-
-static int mc13xxx_common_init(struct mc13xxx *mc13xxx,
-		struct mc13xxx_platform_data *pdata, int irq);
-
-static int mc13xxx_probe(struct spi_device *spi)
-{
-	const struct of_device_id *of_id;
-	struct spi_driver *sdrv = to_spi_driver(spi->dev.driver);
-	struct mc13xxx *mc13xxx;
-	struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
-	int ret;
-
-	of_id = of_match_device(mc13xxx_dt_ids, &spi->dev);
-	if (of_id)
-		sdrv->id_table = &mc13xxx_device_id[(enum mc13xxx_id) of_id->data];
-
-	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
-	if (!mc13xxx)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, mc13xxx);
-	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
-	spi->bits_per_word = 32;
-	spi_setup(spi);
-
-	mc13xxx->dev = &spi->dev;
-	mc13xxx->spidev = spi;
-	mc13xxx->read_dev = mc13xxx_spi_reg_read;
-	mc13xxx->write_dev = mc13xxx_spi_reg_write;
-
-	ret = mc13xxx_common_init(mc13xxx, pdata, spi->irq);
-
-	if (ret) {
-		dev_set_drvdata(&spi->dev, NULL);
-	} else {
-		const struct spi_device_id *devid =
-			spi_get_device_id(mc13xxx->spidev);
-		if (!devid || devid->driver_data != mc13xxx->ictype)
-			dev_warn(mc13xxx->dev,
-				"device id doesn't match auto detection!\n");
-	}
-
-	return ret;
-}
-
-static int mc13xxx_common_init(struct mc13xxx *mc13xxx,
+int mc13xxx_common_init(struct mc13xxx *mc13xxx,
 		struct mc13xxx_platform_data *pdata, int irq)
 {
 	int ret;
@@ -862,42 +714,7 @@ err_revision:
 
 	return 0;
 }
-
-static int __devexit mc13xxx_remove(struct spi_device *spi)
-{
-	struct mc13xxx *mc13xxx = dev_get_drvdata(&spi->dev);
-
-	free_irq(mc13xxx->spidev->irq, mc13xxx);
-
-	mfd_remove_devices(&spi->dev);
-
-	kfree(mc13xxx);
-
-	return 0;
-}
-
-static struct spi_driver mc13xxx_driver = {
-	.id_table = mc13xxx_device_id,
-	.driver = {
-		.name = "mc13xxx",
-		.owner = THIS_MODULE,
-		.of_match_table = mc13xxx_dt_ids,
-	},
-	.probe = mc13xxx_probe,
-	.remove = __devexit_p(mc13xxx_remove),
-};
-
-static int __init mc13xxx_init(void)
-{
-	return spi_register_driver(&mc13xxx_driver);
-}
-subsys_initcall(mc13xxx_init);
-
-static void __exit mc13xxx_exit(void)
-{
-	spi_unregister_driver(&mc13xxx_driver);
-}
-module_exit(mc13xxx_exit);
+EXPORT_SYMBOL_GPL(mc13xxx_common_init);
 
 MODULE_DESCRIPTION("Core driver for Freescale MC13XXX PMIC");
 MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>");
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
new file mode 100644
index 0000000..70d352b
--- /dev/null
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
+ *
+ * loosely based on an earlier driver that has
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/mc13xxx.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+#include "mc13xxx.h"
+
+#define MC13XXX_REGOFFSET_SHIFT 25
+static int mc13xxx_spi_reg_read(struct mc13xxx *mc13xxx,
+				unsigned int offset, u32 *val)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	int ret;
+
+	*val = offset << MC13XXX_REGOFFSET_SHIFT;
+
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = val;
+	t.rx_buf = val;
+	t.len = sizeof(u32);
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+
+	ret = spi_sync(mc13xxx->spidev, &m);
+
+	/* error in message.status implies error return from spi_sync */
+	BUG_ON(!ret && m.status);
+
+	if (ret)
+		return ret;
+
+	*val &= 0xffffff;
+
+	return 0;
+}
+
+static int mc13xxx_spi_reg_write(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 val)
+{
+	u32 buf;
+	struct spi_transfer t;
+	struct spi_message m;
+	int ret;
+
+	buf = 1 << 31 | offset << MC13XXX_REGOFFSET_SHIFT | val;
+
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = &buf;
+	t.rx_buf = &buf;
+	t.len = sizeof(u32);
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+
+	ret = spi_sync(mc13xxx->spidev, &m);
+
+	BUG_ON(!ret && m.status);
+
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct spi_device_id mc13xxx_device_id[] = {
+	{
+		.name = "mc13783",
+		.driver_data = MC13XXX_ID_MC13783,
+	}, {
+		.name = "mc13892",
+		.driver_data = MC13XXX_ID_MC13892,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(spi, mc13xxx_device_id);
+
+static const struct of_device_id mc13xxx_dt_ids[] = {
+	{ .compatible = "fsl,mc13783", .data = (void *) MC13XXX_ID_MC13783, },
+	{ .compatible = "fsl,mc13892", .data = (void *) MC13XXX_ID_MC13892, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
+
+static int mc13xxx_spi_probe(struct spi_device *spi)
+{
+	const struct of_device_id *of_id;
+	struct spi_driver *sdrv = to_spi_driver(spi->dev.driver);
+	struct mc13xxx *mc13xxx;
+	struct mc13xxx_platform_data *pdata = dev_get_platdata(&spi->dev);
+	int ret;
+
+	of_id = of_match_device(mc13xxx_dt_ids, &spi->dev);
+	if (of_id)
+		sdrv->id_table = &mc13xxx_device_id[(enum mc13xxx_id) of_id->data];
+
+	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
+	if (!mc13xxx)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, mc13xxx);
+	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
+	spi->bits_per_word = 32;
+	spi_setup(spi);
+
+	mc13xxx->dev = &spi->dev;
+	mc13xxx->spidev = spi;
+	mc13xxx->read_dev = mc13xxx_spi_reg_read;
+	mc13xxx->write_dev = mc13xxx_spi_reg_write;
+
+	ret = mc13xxx_common_init(mc13xxx, pdata, spi->irq);
+
+	if (ret) {
+		dev_set_drvdata(&spi->dev, NULL);
+	} else {
+		const struct spi_device_id *devid =
+			spi_get_device_id(mc13xxx->spidev);
+		if (!devid || devid->driver_data != mc13xxx->ictype)
+			dev_warn(mc13xxx->dev,
+				"device id doesn't match auto detection!\n");
+	}
+
+	return ret;
+}
+
+static int __devexit mc13xxx_spi_remove(struct spi_device *spi)
+{
+	struct mc13xxx *mc13xxx = dev_get_drvdata(&spi->dev);
+
+	free_irq(mc13xxx->spidev->irq, mc13xxx);
+
+	mfd_remove_devices(&spi->dev);
+
+	kfree(mc13xxx);
+
+	return 0;
+}
+
+static struct spi_driver mc13xxx_spi_driver = {
+	.id_table = mc13xxx_device_id,
+	.driver = {
+		.name = "mc13xxx",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = mc13xxx_spi_probe,
+	.remove = __devexit_p(mc13xxx_spi_remove),
+};
+
+static int __init mc13xxx_spi_init(void)
+{
+	return spi_register_driver(&mc13xxx_spi_driver);
+}
+subsys_initcall(mc13xxx_spi_init);
+
+static void __exit mc13xxx_spi_exit(void)
+{
+	spi_unregister_driver(&mc13xxx_spi_driver);
+}
+module_exit(mc13xxx_spi_exit);
+
+MODULE_DESCRIPTION("SPI driver for Freescale MC13XXX PMIC");
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/mc13xxx.h b/drivers/mfd/mc13xxx.h
new file mode 100644
index 0000000..fbec2d1
--- /dev/null
+++ b/drivers/mfd/mc13xxx.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2012 Creative Product Design
+ * Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#ifndef __DRIVERS_MFD_MC13XXX_H
+#define __DRIVERS_MFD_MC13XXX_H
+
+#include <linux/mutex.h>
+#include <linux/mfd/mc13xxx.h>
+
+enum mc13xxx_id {
+	MC13XXX_ID_MC13783,
+	MC13XXX_ID_MC13892,
+	MC13XXX_ID_INVALID,
+};
+
+struct mc13xxx {
+	struct spi_device *spidev;
+
+	struct device *dev;
+	enum mc13xxx_id ictype;
+
+	struct mutex lock;
+	int flags;
+
+	int (*read_dev)(struct mc13xxx *, unsigned int, u32 *);
+	int (*write_dev)(struct mc13xxx *, unsigned int, u32);
+
+	irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
+	void *irqdata[MC13XXX_NUM_IRQ];
+
+	int adcflags;
+};
+
+int mc13xxx_common_init(struct mc13xxx *mc13xxx,
+		struct mc13xxx_platform_data *pdata, int irq);
+
+#endif /* __DRIVERS_MFD_MC13XXX_H */
-- 
1.7.3.4


------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

[PATCH v2 3/3] mfd: mc13xxx-core: Add i2c driver

[Marc Reilly]

Adds support for mc13xxx family ICs connected via i2c.

Signed-off-by: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org>
Signed-off-by: Oskar Schirmer <oskar-fYPSZ7JpQqsAvxtiuMwx3w@public.gmane.org>
---
 drivers/mfd/Kconfig       |    8 ++-
 drivers/mfd/Makefile      |    1 +
 drivers/mfd/mc13xxx-i2c.c |  143 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/mc13xxx.h     |    5 +-
 4 files changed, 155 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mfd/mc13xxx-i2c.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 501fee5..3a039ff 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -573,7 +573,7 @@ config MFD_MC13783
 
 config MFD_MC13XXX
 	tristate "Support Freescale MC13783 and MC13892"
-	depends on SPI_MASTER
+	depends on SPI_MASTER || I2C
 	select MFD_CORE
 	select MFD_MC13783
 	help
@@ -590,6 +590,12 @@ config MFD_MC13XXX_SPI
 	help
 	  Select this if your MC13xxx is connected via an SPI bus.
 
+config MFD_MC13XXX_I2C
+	tristate "MC13xxx I2C interface" if I2C
+	default I2C
+	help
+	  Select this if your MC13xxx is connected via an I2C bus.
+
 endif
 
 config ABX500_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2dc66ed..6d4566f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_TWL6040_CORE)	+= twl6040-core.o twl6040-irq.o
 
 obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
 obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
+obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c
new file mode 100644
index 0000000..100c9e6
--- /dev/null
+++ b/drivers/mfd/mc13xxx-i2c.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2009-2010 Creative Product Design
+ * Marc Reilly marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/mc13xxx.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+#include "mc13xxx.h"
+
+static int mc13xxx_i2c_reg_read(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 *val)
+{
+	int ret;
+	unsigned char buf[3] = {0, 0, 0};
+
+	ret = i2c_smbus_read_i2c_block_data(mc13xxx->i2cclient,
+			offset, 3, buf);
+	*val = buf[0] << 16 | buf[1] << 8 | buf[2];
+
+	return ret == 3 ? 0 : ret;
+}
+
+static int mc13xxx_i2c_reg_write(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 val)
+{
+	int ret;
+	unsigned char buf[3];
+
+	buf[0] = (val >> 16) & 0xff;
+	buf[1] = (val >> 8) & 0xff;
+	buf[2] = val & 0xff;
+
+	ret = i2c_smbus_write_i2c_block_data(mc13xxx->i2cclient,
+			offset, 3, buf);
+
+	return ret;
+}
+
+static const struct i2c_device_id mc13xxx_i2c_device_id[] = {
+	{
+		.name = "mc13783",
+		.driver_data = MC13XXX_ID_MC13783
+	}, {
+		.name = "mc13892",
+		.driver_data = MC13XXX_ID_MC13892,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(i2c, mc13xxx_i2c_device_id);
+
+static const struct of_device_id mc13xxx_dt_ids[] = {
+	{ .compatible = "fsl,mc13783", .data = (void *) MC13XXX_ID_MC13783, },
+	{ .compatible = "fsl,mc13892", .data = (void *) MC13XXX_ID_MC13892, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids);
+
+static int mc13xxx_i2c_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct of_device_id *of_id;
+	struct i2c_driver *idrv = to_i2c_driver(client->dev.driver);
+	struct mc13xxx *mc13xxx;
+	struct mc13xxx_platform_data *pdata = dev_get_platdata(&client->dev);
+	int ret;
+
+	of_id = of_match_device(mc13xxx_dt_ids, &client->dev);
+	if (of_id)
+		idrv->id_table =
+			&mc13xxx_i2c_device_id[(enum mc13xxx_id) of_id->data];
+
+	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
+	if (!mc13xxx)
+		return -ENOMEM;
+
+	dev_set_drvdata(&client->dev, mc13xxx);
+	mc13xxx->dev = &client->dev;
+	mc13xxx->i2cclient = client;
+	mc13xxx->read_dev = mc13xxx_i2c_reg_read;
+	mc13xxx->write_dev = mc13xxx_i2c_reg_write;
+
+	ret = mc13xxx_common_init(mc13xxx, pdata, client->irq);
+
+	if (ret == 0 && (id->driver_data != mc13xxx->ictype))
+		dev_warn(mc13xxx->dev,
+				"device id doesn't match auto detection!\n");
+
+	return ret;
+}
+
+static int __devexit mc13xxx_i2c_remove(struct i2c_client *client)
+{
+	struct mc13xxx *mc13xxx = dev_get_drvdata(&client->dev);
+
+	free_irq(client->irq, mc13xxx);
+
+	mfd_remove_devices(&client->dev);
+
+	kfree(mc13xxx);
+
+	return 0;
+}
+
+static struct i2c_driver mc13xxx_i2c_driver = {
+	.id_table = mc13xxx_i2c_device_id,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "mc13xxx",
+		.of_match_table = mc13xxx_dt_ids,
+	},
+	.probe = mc13xxx_i2c_probe,
+	.remove = __devexit_p(mc13xxx_i2c_remove),
+};
+
+static int __init mc13xxx_i2c_init(void)
+{
+	return i2c_add_driver(&mc13xxx_i2c_driver);
+}
+subsys_initcall(mc13xxx_i2c_init);
+
+static void __exit mc13xxx_i2c_exit(void)
+{
+	i2c_del_driver(&mc13xxx_i2c_driver);
+}
+module_exit(mc13xxx_i2c_exit);
+
+MODULE_DESCRIPTION("i2c driver for Freescale MC13XXX PMIC");
+MODULE_AUTHOR("Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/mc13xxx.h b/drivers/mfd/mc13xxx.h
index fbec2d1..13f83ed 100644
--- a/drivers/mfd/mc13xxx.h
+++ b/drivers/mfd/mc13xxx.h
@@ -19,7 +19,10 @@ enum mc13xxx_id {
 };
 
 struct mc13xxx {
-	struct spi_device *spidev;
+	union {
+		struct spi_device *spidev;
+		struct i2c_client *i2cclient;
+	};
 
 	struct device *dev;
 	enum mc13xxx_id ictype;
-- 
1.7.3.4


------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

Re: [PATCH v2 1/3] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.

[Uwe Kleine-König]

On Sun, Mar 11, 2012 at 12:30:00PM +1100, Marc Reilly wrote:
> This patch abstracts the bus specific operations from the driver core.
> Read and write handlers are introduced and generic initialization is
> consolidated into mc13xxx_comon_init. The irq member is removed because
s/_comon_/_common_/

one minor nitpick below.

> it is unused.
> 
> Signed-off-by: Marc Reilly <marc-DtE7ei5U7Kg0n/F98K4Iww@public.gmane.org>
> ---
>  drivers/mfd/mc13xxx-core.c |  162 ++++++++++++++++++++++++++------------------
>  1 files changed, 97 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
> index 7122386..19d94a1 100644
> --- a/drivers/mfd/mc13xxx-core.c
> +++ b/drivers/mfd/mc13xxx-core.c
> @@ -235,6 +234,34 @@ int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
>  
>  	return 0;
>  }
> +
> +int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val)
> +{
> +	int ret;
> +
> +	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
> +
> +	if (offset > MC13XXX_NUMREGS)
> +		return -EINVAL;
> +
> +	ret = mc13xxx->read_dev(mc13xxx, offset, val);
> +	dev_vdbg(mc13xxx->dev, "[0x%02x] -> 0x%06x\n", offset, *val);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(mc13xxx_reg_read);
> +
> +int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val)
> +{
> +	BUG_ON(!mutex_is_locked(&mc13xxx->lock));
> +
> +	dev_vdbg(mc13xxx->dev, "[0x%02x] <- 0x%06x\n", offset, val);
> +
> +	if (offset > MC13XXX_NUMREGS || val > 0xffffff)
> +		return -EINVAL;
> +
> +	return mc13xxx->write_dev(mc13xxx, offset, val);
> +}
>  EXPORT_SYMBOL(mc13xxx_reg_write);
>  
>  int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset,
> @@ -439,7 +466,7 @@ static int mc13xxx_irq_handle(struct mc13xxx *mc13xxx,
>  			if (handled == IRQ_HANDLED)
>  				num_handled++;
>  		} else {
> -			dev_err(&mc13xxx->spidev->dev,
> +			dev_err(mc13xxx->dev,
>  					"BUG: irq %u but no handler\n",
Without having counted I think you can join these two lines.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Re: mfd: mc13xxx: add I2C support, V2

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 829 bytes --]


> The only issue from V1 [0] not addressed is the use of regmap - mainly, I don't
> have the time. I accept that this is a lame excuse but hope that use of regmap 
> can come later if it is required.

I really appreciate the effort, yet I fear that this is a show stopper. It gets
open coded what regmap is trying to abstract, adding complexity to the driver
instead of (probably) reducing it. We could also get caching basically for
free, if this is desired. I think the regmap approach should have been tried
before we go custom. sound/soc/codecs/ad193x.c might give an impression how
regmap spi/i2c in one driver could look like.

Thanks,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: mfd: mc13xxx: add I2C support, V2

[Mark Brown]

On Sun, Mar 11, 2012 at 12:50:18PM +0100, Wolfram Sang wrote:

> free, if this is desired. I think the regmap approach should have been tried
> before we go custom. sound/soc/codecs/ad193x.c might give an impression how
> regmap spi/i2c in one driver could look like.

There's a bunch of other examples in sound/soc and also the wm831x PMIC
driver in drivers/mfd.  For an initial conversion I'd not worry about
the cache, especially with some of the older PMICs hardware designers
were known to come up with some "innovative usability solutions" which
can cause hassle.