Re: [PATCH 2/2] arm: dts: socfpga: Add SPI nodes & update copyright.

[Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Hi!

On Tue, Oct 07, 2014 at 03:55:54PM -0500, Thor Thayer wrote:
> 
> On 10/07/2014 03:31 PM, Steffen Trumtrar wrote:
> >Hi!
> >
> >On Tue, Oct 07, 2014 at 02:48:17PM -0500, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> >>From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> >>
> >>Add 2 SPI nodes to SOCFPGA device tree. Update copyright.
> >>Update spi-dw.txt with bus-num as an optional property.
> >>
> >>Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> >>---
> >>  Documentation/devicetree/bindings/spi/spi-dw.txt |    1 +
> >>  arch/arm/boot/dts/socfpga.dtsi                   |   52 ++++++++++++++++++----
> >>  2 files changed, 45 insertions(+), 8 deletions(-)
> >>
> >>diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
> >>index 7b63ed6..f1d54e6 100644
> >>--- a/Documentation/devicetree/bindings/spi/spi-dw.txt
> >>+++ b/Documentation/devicetree/bindings/spi/spi-dw.txt
> >>@@ -11,6 +11,7 @@ Required properties:
> >>  Optional properties:
> >>  - cs-gpios: see spi-bus.txt
> >>+- bus-num: see spi-bus.txt
> >>  Example:
> >>diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> >>index 4d77ad6..42855bc 100644
> >>--- a/arch/arm/boot/dts/socfpga.dtsi
> >>+++ b/arch/arm/boot/dts/socfpga.dtsi
> >>@@ -1,15 +1,14 @@
> >>  /*
> >>- *  Copyright (C) 2012 Altera <www.altera.com>
> >>+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved.
> >>   *
> >>   * This program is free software; you can redistribute it and/or modify
> >>- * it under the terms of the GNU General Public License as published by
> >>- * the Free Software Foundation; either version 2 of the License, or
> >>- * (at your option) any later version.
> >>+ * it under the terms and conditions of the GNU General Public License,
> >>+ * version 2, as published by the Free Software Foundation.
> >>   *
> >>- * This program is distributed in the hope that it will be useful,
> >>- * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >>- * GNU General Public License for more details.
> >>+ * This program is distributed in the hope it will be useful, but WITHOUT
> >>+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> >>+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> >>+ * more details.
> >This shouldn't be in the same patch IMHO.
> Hi Steffen,
> 
> Are you saying the socfpga.dtsi changes shouldn't be in the patch or
> the copyright update?
> 
> If the copyright update, it seemed like a good time since there were
> other changes.
> 

Going with what Mark Brown said: Split it up more.

> >>   *
> >>   * You should have received a copy of the GNU General Public License
> >>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> >>@@ -628,6 +627,43 @@
> >>  			clock-names = "biu", "ciu";
> >>  		};
> >>+		spi0: spi@fff00000 {
> >>+			compatible = "snps,dw-apb-ssi";
> >>+			#address-cells = <1>;
> >>+			#size-cells = <0>;
> >>+			reg = <0xfff00000 0x1000>;
> >>+			interrupts = <0 154 4>;
> >>+			num-cs = <4>;
> >>+			bus-num = <0>;
> >>+			clocks = <&per_base_clk>;
> >>+
> >>+			spidev@0 {
> >>+				compatible = "spidev";
> >>+				reg = <0>;	/* chip select */
> >>+				spi-max-frequency = <100000000>;
> >>+				enable-dma = <1>;
> >>+			};
> >>+		};
> >>+
> >>+		spi1: spi@fff01000 {
> >>+			compatible = "snps,dw-apb-ssi";
> >>+			#address-cells = <1>;
> >>+			#size-cells = <0>;
> >>+			reg = <0xfff01000 0x1000>;
> >>+			interrupts = <0 156 4>;
> >>+			num-cs = <4>;
> >>+			bus-num = <1>;
> >>+			clocks = <&per_base_clk>;
				   ^^^^^^^^^^^^
Shouldn't this be spi_m_clk?

> >>+			status = "disabled";
> >>+
> >>+			spidev@0 {
> >>+				compatible = "spidev";
> >>+				reg = <0>;
> >>+				spi-max-frequency = <100000000>;
> >>+				enable-dma = <1>;
> >>+			};
> >>+		};
> >>+
> >I don't think, this is the right place. Put it in the board dts.
> >Oh, and why is spi0 not disabled but spi1 is?
> OK. I can put it in the board dts. I thought the IP would go in the
> socfpga.dtsi file since it describes the chip.
> 

Okay, I see that my comment is unclear. What I wanted to say is:
put the spidev into your board dts. Other boards might have something
else connected there.

> I understand your point which is why the 2nd SPI is disabled - it is
> not pinned out on the Development Kit board.
> 

Okay. Then disable both in the dtsi and enable the one you want to use
in your board file. The dtsi should only have stuff that is common to
ALL Socfpgas, so the IPs (if they are the same, which AFAIK they are).

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html