[PATCH 1/2] dt-bindings: spi: document bcm63xx SPI devicetree bindings

[PATCH 1/2] dt-bindings: spi: document bcm63xx SPI devicetree bindings

[Jonas Gorski]

Add documentation for the bindings of the low speed SPI controller found
on most bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../devicetree/bindings/spi/spi-bcm63xx.txt        | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
new file mode 100644
index 000000000000..1c16f6692613
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6348/BCM6358 SPI controller
+
+Required properties:
+- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandle of the SPI clock.
+- clock-names: has to be "spi".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+  if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@10000800 {
+		compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+		reg = <0x10000800 0x70c>;
+
+		interrupts = <1>;
+
+		clocks = <&clkctl 9>;
+		clock-names = "spi";
+
+		num-cs = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] spi/bcm63xx: allow for probing through devicetree

[Jonas Gorski]

Add required binding support to probe through device tree.

Use the compatible instead of the resource size for identifiying the
block type, and allow reducing the number of cs lines through OF.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c | 42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index caa733ec405c..325131370941 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -26,6 +26,7 @@
 #include <linux/completion.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
 
 /* BCM 6338/6348 SPI core */
 #define SPI_6348_RSET_SIZE		64
@@ -484,21 +485,48 @@ static const struct platform_device_id bcm63xx_spi_dev_match[] = {
 	},
 };
 
+static const struct of_device_id bcm63xx_spi_of_match[] = {
+	{ .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
+	{ .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
+	{ },
+};
+
 static int bcm63xx_spi_probe(struct platform_device *pdev)
 {
 	struct resource *r;
 	const unsigned long *bcm63xx_spireg;
 	struct device *dev = &pdev->dev;
-	int irq;
+	int irq, bus_num;
 	struct spi_master *master;
 	struct clk *clk;
 	struct bcm63xx_spi *bs;
 	int ret;
+	u32 num_cs = BCM63XX_SPI_MAX_CS;
 
-	if (!pdev->id_entry->driver_data)
-		return -EINVAL;
+	if (dev->of_node) {
+		const struct of_device_id *match;
 
-	bcm63xx_spireg = (const unsigned long *)pdev->id_entry->driver_data;
+		match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
+		if (!match)
+			return -EINVAL;
+		bcm63xx_spireg = match->data;
+
+		of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+		if (num_cs > BCM63XX_SPI_MAX_CS) {
+			dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+				 num_cs);
+			num_cs = BCM63XX_SPI_MAX_CS;
+		}
+
+		bus_num = -1;
+	} else if (pdev->id_entry->driver_data) {
+		const struct platform_device_id *match = pdev->id_entry;
+
+		bcm63xx_spireg = (const unsigned long *)match->driver_data;
+		bus_num = BCM63XX_SPI_BUS_NUM;
+	} else {
+		return -EINVAL;
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -543,8 +571,9 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 		goto out_err;
 	}
 
-	master->bus_num = BCM63XX_SPI_BUS_NUM;
-	master->num_chipselect = BCM63XX_SPI_MAX_CS;
+	master->dev.of_node = dev->of_node;
+	master->bus_num = bus_num;
+	master->num_chipselect = num_cs;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	master->mode_bits = MODEBITS;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
@@ -633,6 +662,7 @@ static struct platform_driver bcm63xx_spi_driver = {
 	.driver = {
 		.name	= "bcm63xx-spi",
 		.pm	= &bcm63xx_spi_pm_ops,
+		.of_match_table = bcm63xx_spi_of_match,
 	},
 	.id_table	= bcm63xx_spi_dev_match,
 	.probe		= bcm63xx_spi_probe,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi/bcm63xx: allow for probing through devicetree" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx: allow for probing through devicetree

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c29f08890ae337e398becf5ba586114553e99771 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Tue, 21 Feb 2017 11:58:22 +0100
Subject: [PATCH] spi/bcm63xx: allow for probing through devicetree

Add required binding support to probe through device tree.

Use the compatible instead of the resource size for identifiying the
block type, and allow reducing the number of cs lines through OF.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c | 42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index caa733ec405c..325131370941 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -26,6 +26,7 @@
 #include <linux/completion.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
 
 /* BCM 6338/6348 SPI core */
 #define SPI_6348_RSET_SIZE		64
@@ -484,21 +485,48 @@ static const struct platform_device_id bcm63xx_spi_dev_match[] = {
 	},
 };
 
+static const struct of_device_id bcm63xx_spi_of_match[] = {
+	{ .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
+	{ .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
+	{ },
+};
+
 static int bcm63xx_spi_probe(struct platform_device *pdev)
 {
 	struct resource *r;
 	const unsigned long *bcm63xx_spireg;
 	struct device *dev = &pdev->dev;
-	int irq;
+	int irq, bus_num;
 	struct spi_master *master;
 	struct clk *clk;
 	struct bcm63xx_spi *bs;
 	int ret;
+	u32 num_cs = BCM63XX_SPI_MAX_CS;
 
-	if (!pdev->id_entry->driver_data)
-		return -EINVAL;
+	if (dev->of_node) {
+		const struct of_device_id *match;
 
-	bcm63xx_spireg = (const unsigned long *)pdev->id_entry->driver_data;
+		match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
+		if (!match)
+			return -EINVAL;
+		bcm63xx_spireg = match->data;
+
+		of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+		if (num_cs > BCM63XX_SPI_MAX_CS) {
+			dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
+				 num_cs);
+			num_cs = BCM63XX_SPI_MAX_CS;
+		}
+
+		bus_num = -1;
+	} else if (pdev->id_entry->driver_data) {
+		const struct platform_device_id *match = pdev->id_entry;
+
+		bcm63xx_spireg = (const unsigned long *)match->driver_data;
+		bus_num = BCM63XX_SPI_BUS_NUM;
+	} else {
+		return -EINVAL;
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -543,8 +571,9 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 		goto out_err;
 	}
 
-	master->bus_num = BCM63XX_SPI_BUS_NUM;
-	master->num_chipselect = BCM63XX_SPI_MAX_CS;
+	master->dev.of_node = dev->of_node;
+	master->bus_num = bus_num;
+	master->num_chipselect = num_cs;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	master->mode_bits = MODEBITS;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
@@ -633,6 +662,7 @@ static struct platform_driver bcm63xx_spi_driver = {
 	.driver = {
 		.name	= "bcm63xx-spi",
 		.pm	= &bcm63xx_spi_pm_ops,
+		.of_match_table = bcm63xx_spi_of_match,
 	},
 	.id_table	= bcm63xx_spi_dev_match,
 	.probe		= bcm63xx_spi_probe,
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] dt-bindings: spi: document bcm63xx SPI devicetree bindings

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 288 bytes --]

On Tue, Feb 21, 2017 at 11:58:21AM +0100, Jonas Gorski wrote:
> Add documentation for the bindings of the low speed SPI controller found
> on most bcm63xx SoCs.

Please use subject lines matching the style for the subsystem.  This
makes it easier for people to identify relevant patches.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Applied "spi/bcm63xx: document bcm63xx SPI devicetree bindings" to the spi tree

[Mark Brown]

The patch

   spi/bcm63xx: document bcm63xx SPI devicetree bindings

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 54e43b6085f12bec3718806d0bf6ba4a3e4b2078 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Tue, 21 Feb 2017 11:58:21 +0100
Subject: [PATCH] spi/bcm63xx: document bcm63xx SPI devicetree bindings

Add documentation for the bindings of the low speed SPI controller found
on most bcm63xx SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/spi/spi-bcm63xx.txt        | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
new file mode 100644
index 000000000000..1c16f6692613
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6348/BCM6358 SPI controller
+
+Required properties:
+- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandle of the SPI clock.
+- clock-names: has to be "spi".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+  if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@10000800 {
+		compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+		reg = <0x10000800 0x70c>;
+
+		interrupts = <1>;
+
+		clocks = <&clkctl 9>;
+		clock-names = "spi";
+
+		num-cs = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] dt-bindings: spi: document bcm63xx SPI devicetree bindings

[Florian Fainelli]

On 02/21/2017 02:58 AM, Jonas Gorski wrote:
> Add documentation for the bindings of the low speed SPI controller found
> on most bcm63xx SoCs.
> 
> Signed-off-by: Jonas Gorski <jonas.gorski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Reviewed-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html