linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Revert "spi: imx: dynamic burst length adjust for PIO mode"
@ 2017-05-23 12:38 Sascha Hauer
       [not found] ` <20170523123827.22408-1-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
  0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2017-05-23 12:38 UTC (permalink / raw)
  To: linux-spi-u79uwXL29TY76Z2rM5mHXA
  Cc: Jiada Wang, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Mark Brown,
	Fabio Estevam, Sascha Hauer

This reverts commits 8d4a6cad7adb3ddac32cd52635f20e11de11a658 and
179547e143e773f9f866ad3536275ab627711f3a.

Besides the problems already found with this patch it also modifies
the spi transfer tx_buf in spi_imx_u32_swap_u8() and spi_imx_u32_swap_u16().
This is hidden from the compiler with an explicit cast from const void*
to u32*, so no warning is issued.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 163 +++-----------------------------------------------
 1 file changed, 8 insertions(+), 155 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 19b30cf7d2b7..b402530a7a9a 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,11 +56,9 @@
 
 /* The maximum  bytes that a sdma BD can transfer.*/
 #define MAX_SDMA_BD_BYTES  (1 << 15)
-#define MX51_ECSPI_CTRL_MAX_BURST	512
 struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
-	unsigned int len;
 };
 
 enum spi_imx_devtype {
@@ -99,14 +97,12 @@ struct spi_imx_data {
 	unsigned int bytes_per_word;
 	unsigned int spi_drctl;
 
-	unsigned int count, count_index;
+	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
 	void (*rx)(struct spi_imx_data *);
 	void *rx_buf;
 	const void *tx_buf;
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
-	unsigned int dynamic_burst, bpw_rx;
-	unsigned int bpw_w;
 
 	/* DMA */
 	bool usedma;
@@ -256,7 +252,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_CTRL_PREDIV_OFFSET	12
 #define MX51_ECSPI_CTRL_CS(cs)		((cs) << 18)
 #define MX51_ECSPI_CTRL_BL_OFFSET	20
-#define MX51_ECSPI_CTRL_BL_MASK		(0xfff << 20)
 
 #define MX51_ECSPI_CONFIG	0x0c
 #define MX51_ECSPI_CONFIG_SCLKPHA(cs)	(1 << ((cs) +  0))
@@ -284,77 +279,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_TESTREG	0x20
 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
 
-static void spi_imx_u32_swap_u8(struct spi_transfer *transfer, u32 *buf)
-{
-	int i;
-
-	if (!buf)
-		return;
-
-	for (i = 0; i < transfer->len / 4; i++)
-		*(buf + i) = cpu_to_be32(*(buf + i));
-}
-
-static void spi_imx_u32_swap_u16(struct spi_transfer *transfer, u32 *buf)
-{
-	int i;
-
-	if (!buf)
-		return;
-
-	for (i = 0; i < transfer->len / 4; i++) {
-		u16 *temp = (u16 *)buf;
-
-		*(temp + i * 2) = cpu_to_be16(*(temp + i * 2));
-		*(temp + i * 2 + 1) = cpu_to_be16(*(temp + i * 2 + 1));
-
-		*(buf + i) = cpu_to_be32(*(buf + i));
-	}
-}
-
-static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
-{
-	if (!spi_imx->bpw_rx) {
-		spi_imx_buf_rx_u32(spi_imx);
-		return;
-	}
-
-	if (spi_imx->bpw_w == 1)
-		spi_imx_buf_rx_u8(spi_imx);
-	else if (spi_imx->bpw_w == 2)
-		spi_imx_buf_rx_u16(spi_imx);
-}
-
-static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
-{
-	u32 ctrl, val;
-
-	if (spi_imx->count == spi_imx->count_index) {
-		spi_imx->count_index = spi_imx->count > sizeof(u32) ?
-					spi_imx->count % sizeof(u32) : 0;
-		ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
-		ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
-		if (spi_imx->count >= sizeof(u32)) {
-			val = spi_imx->count - spi_imx->count_index;
-		} else {
-			val = spi_imx->bpw_w;
-			spi_imx->bpw_rx = 1;
-		}
-		ctrl |= ((val * 8 - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
-		writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
-	}
-
-	if (spi_imx->count >= sizeof(u32)) {
-		spi_imx_buf_tx_u32(spi_imx);
-		return;
-	}
-
-	if (spi_imx->bpw_w == 1)
-		spi_imx_buf_tx_u8(spi_imx);
-	else if (spi_imx->bpw_w == 2)
-		spi_imx_buf_tx_u16(spi_imx);
-}
-
 /* MX51 eCSPI */
 static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
 				      unsigned int fspi, unsigned int *fres)
@@ -446,15 +370,7 @@ static int mx51_ecspi_config(struct spi_device *spi,
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
 
-	if (spi_imx->dynamic_burst) {
-		if (config->len > MX51_ECSPI_CTRL_MAX_BURST)
-			ctrl |= MX51_ECSPI_CTRL_BL_MASK;
-		else
-			ctrl |= (((config->len - config->len % 4) * 8 - 1) <<
-				MX51_ECSPI_CTRL_BL_OFFSET);
-	} else {
-		ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
-	}
+	ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
 
 	cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
 
@@ -889,8 +805,6 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
 	while (spi_imx->txfifo < spi_imx_get_fifosize(spi_imx)) {
 		if (!spi_imx->count)
 			break;
-		if (spi_imx->txfifo && (spi_imx->count == spi_imx->count_index))
-			break;
 		spi_imx->tx(spi_imx);
 		spi_imx->txfifo++;
 	}
@@ -981,12 +895,8 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	struct spi_imx_config config;
 	int ret;
 
-	spi_imx->dynamic_burst = 0;
-	spi_imx->bpw_rx = 0;
-
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
-	config.len = t->len;
 
 	if (!config.speed_hz)
 		config.speed_hz = spi->max_speed_hz;
@@ -995,32 +905,14 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 
 	/* Initialize the functions for transfer */
 	if (config.bpw <= 8) {
-		if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u8;
-			spi_imx->tx = spi_imx_buf_tx_u8;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
 	} else if (config.bpw <= 16) {
-		if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u16;
-			spi_imx->tx = spi_imx_buf_tx_u16;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
 	} else {
-		if (is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u32;
-			spi_imx->tx = spi_imx_buf_tx_u32;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
 	}
 
 	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
@@ -1028,8 +920,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	else
 		spi_imx->usedma = 0;
 
-	spi_imx->bpw_w = DIV_ROUND_UP(config.bpw, 8);
-
 	if (spi_imx->usedma) {
 		ret = spi_imx_dma_configure(spi->master,
 					    spi_imx_bytes_per_word(config.bpw));
@@ -1204,27 +1094,6 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 	spi_imx->count = transfer->len;
 	spi_imx->txfifo = 0;
 
-	if (spi_imx->dynamic_burst) {
-		if (spi_imx->count > MX51_ECSPI_CTRL_MAX_BURST)
-			spi_imx->count_index = spi_imx->count %
-					       MX51_ECSPI_CTRL_MAX_BURST;
-		else
-			spi_imx->count_index = spi_imx->count % sizeof(u32);
-
-		switch (spi_imx->bpw_w) {
-		case 1:
-			spi_imx_u32_swap_u8(transfer,
-					    (u32 *)transfer->tx_buf);
-			break;
-		case 2:
-			spi_imx_u32_swap_u16(transfer,
-					     (u32 *)transfer->tx_buf);
-			break;
-		default:
-			break;
-		}
-	}
-
 	reinit_completion(&spi_imx->xfer_done);
 
 	spi_imx_push(spi_imx);
@@ -1241,22 +1110,6 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 		return -ETIMEDOUT;
 	}
 
-	if (spi_imx->dynamic_burst) {
-		switch (spi_imx->bpw_w) {
-		case 1:
-			spi_imx_u32_swap_u8(transfer,
-					    (u32 *)transfer->rx_buf);
-			break;
-		case 2:
-			spi_imx_u32_swap_u16(transfer,
-					     (u32 *)transfer->rx_buf);
-			break;
-		default:
-			break;
-		}
-		spi_imx->dynamic_burst = 0;
-	}
-
 	return transfer->len;
 }
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] Revert "spi: imx: dynamic burst length adjust for PIO mode"
       [not found] ` <20170523123827.22408-1-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
@ 2017-05-23 18:22   ` Mark Brown
  2017-05-23 18:22   ` Applied "spi: imx: Revert "spi: imx: dynamic burst length adjust for PIO mode"" to the spi tree Mark Brown
  1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2017-05-23 18:22 UTC (permalink / raw)
  To: Sascha Hauer
  Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA, Jiada Wang,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Fabio Estevam

[-- Attachment #1: Type: text/plain, Size: 460 bytes --]

On Tue, May 23, 2017 at 02:38:27PM +0200, Sascha Hauer wrote:
> This reverts commits 8d4a6cad7adb3ddac32cd52635f20e11de11a658 and
> 179547e143e773f9f866ad3536275ab627711f3a.

Please submit patches using subject lines reflecting the style for the
subsystem.  This makes it easier for people to identify relevant
patches.  Look at what existing commits in the area you're changing are
doing and make sure your subject lines visually resemble what they're
doing.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Applied "spi: imx: Revert "spi: imx: dynamic burst length adjust for PIO mode"" to the spi tree
       [not found] ` <20170523123827.22408-1-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
  2017-05-23 18:22   ` Mark Brown
@ 2017-05-23 18:22   ` Mark Brown
  1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2017-05-23 18:22 UTC (permalink / raw)
  To: Sascha Hauer
  Cc: Mark Brown, linux-spi-u79uwXL29TY76Z2rM5mHXA, Jiada Wang,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Mark Brown, Fabio Estevam,
	linux-spi-u79uwXL29TY76Z2rM5mHXA

The patch

   spi: imx: Revert "spi: imx: dynamic burst length adjust for PIO mode"

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 09b3ed2d5916f270ffbc5d002a2196ededf5ec7e Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Tue, 23 May 2017 14:38:27 +0200
Subject: [PATCH] spi: imx: Revert "spi: imx: dynamic burst length adjust for
 PIO mode"

This reverts commits 8d4a6cad7adb3ddac32cd52635f20e11de11a658 and
179547e143e773f9f866ad3536275ab627711f3a.

Besides the problems already found with this patch it also modifies
the spi transfer tx_buf in spi_imx_u32_swap_u8() and spi_imx_u32_swap_u16().
This is hidden from the compiler with an explicit cast from const void*
to u32*, so no warning is issued.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 163 +++-----------------------------------------------
 1 file changed, 8 insertions(+), 155 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 19b30cf7d2b7..b402530a7a9a 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,11 +56,9 @@
 
 /* The maximum  bytes that a sdma BD can transfer.*/
 #define MAX_SDMA_BD_BYTES  (1 << 15)
-#define MX51_ECSPI_CTRL_MAX_BURST	512
 struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
-	unsigned int len;
 };
 
 enum spi_imx_devtype {
@@ -99,14 +97,12 @@ struct spi_imx_data {
 	unsigned int bytes_per_word;
 	unsigned int spi_drctl;
 
-	unsigned int count, count_index;
+	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
 	void (*rx)(struct spi_imx_data *);
 	void *rx_buf;
 	const void *tx_buf;
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
-	unsigned int dynamic_burst, bpw_rx;
-	unsigned int bpw_w;
 
 	/* DMA */
 	bool usedma;
@@ -256,7 +252,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_CTRL_PREDIV_OFFSET	12
 #define MX51_ECSPI_CTRL_CS(cs)		((cs) << 18)
 #define MX51_ECSPI_CTRL_BL_OFFSET	20
-#define MX51_ECSPI_CTRL_BL_MASK		(0xfff << 20)
 
 #define MX51_ECSPI_CONFIG	0x0c
 #define MX51_ECSPI_CONFIG_SCLKPHA(cs)	(1 << ((cs) +  0))
@@ -284,77 +279,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_TESTREG	0x20
 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
 
-static void spi_imx_u32_swap_u8(struct spi_transfer *transfer, u32 *buf)
-{
-	int i;
-
-	if (!buf)
-		return;
-
-	for (i = 0; i < transfer->len / 4; i++)
-		*(buf + i) = cpu_to_be32(*(buf + i));
-}
-
-static void spi_imx_u32_swap_u16(struct spi_transfer *transfer, u32 *buf)
-{
-	int i;
-
-	if (!buf)
-		return;
-
-	for (i = 0; i < transfer->len / 4; i++) {
-		u16 *temp = (u16 *)buf;
-
-		*(temp + i * 2) = cpu_to_be16(*(temp + i * 2));
-		*(temp + i * 2 + 1) = cpu_to_be16(*(temp + i * 2 + 1));
-
-		*(buf + i) = cpu_to_be32(*(buf + i));
-	}
-}
-
-static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
-{
-	if (!spi_imx->bpw_rx) {
-		spi_imx_buf_rx_u32(spi_imx);
-		return;
-	}
-
-	if (spi_imx->bpw_w == 1)
-		spi_imx_buf_rx_u8(spi_imx);
-	else if (spi_imx->bpw_w == 2)
-		spi_imx_buf_rx_u16(spi_imx);
-}
-
-static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
-{
-	u32 ctrl, val;
-
-	if (spi_imx->count == spi_imx->count_index) {
-		spi_imx->count_index = spi_imx->count > sizeof(u32) ?
-					spi_imx->count % sizeof(u32) : 0;
-		ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
-		ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
-		if (spi_imx->count >= sizeof(u32)) {
-			val = spi_imx->count - spi_imx->count_index;
-		} else {
-			val = spi_imx->bpw_w;
-			spi_imx->bpw_rx = 1;
-		}
-		ctrl |= ((val * 8 - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
-		writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
-	}
-
-	if (spi_imx->count >= sizeof(u32)) {
-		spi_imx_buf_tx_u32(spi_imx);
-		return;
-	}
-
-	if (spi_imx->bpw_w == 1)
-		spi_imx_buf_tx_u8(spi_imx);
-	else if (spi_imx->bpw_w == 2)
-		spi_imx_buf_tx_u16(spi_imx);
-}
-
 /* MX51 eCSPI */
 static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
 				      unsigned int fspi, unsigned int *fres)
@@ -446,15 +370,7 @@ static int mx51_ecspi_config(struct spi_device *spi,
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);
 
-	if (spi_imx->dynamic_burst) {
-		if (config->len > MX51_ECSPI_CTRL_MAX_BURST)
-			ctrl |= MX51_ECSPI_CTRL_BL_MASK;
-		else
-			ctrl |= (((config->len - config->len % 4) * 8 - 1) <<
-				MX51_ECSPI_CTRL_BL_OFFSET);
-	} else {
-		ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
-	}
+	ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
 
 	cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);
 
@@ -889,8 +805,6 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
 	while (spi_imx->txfifo < spi_imx_get_fifosize(spi_imx)) {
 		if (!spi_imx->count)
 			break;
-		if (spi_imx->txfifo && (spi_imx->count == spi_imx->count_index))
-			break;
 		spi_imx->tx(spi_imx);
 		spi_imx->txfifo++;
 	}
@@ -981,12 +895,8 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	struct spi_imx_config config;
 	int ret;
 
-	spi_imx->dynamic_burst = 0;
-	spi_imx->bpw_rx = 0;
-
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
-	config.len = t->len;
 
 	if (!config.speed_hz)
 		config.speed_hz = spi->max_speed_hz;
@@ -995,32 +905,14 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 
 	/* Initialize the functions for transfer */
 	if (config.bpw <= 8) {
-		if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u8;
-			spi_imx->tx = spi_imx_buf_tx_u8;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
 	} else if (config.bpw <= 16) {
-		if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u16;
-			spi_imx->tx = spi_imx_buf_tx_u16;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
 	} else {
-		if (is_imx51_ecspi(spi_imx)) {
-			spi_imx->dynamic_burst = 1;
-			spi_imx->rx = spi_imx_buf_rx_swap;
-			spi_imx->tx = spi_imx_buf_tx_swap;
-		} else {
-			spi_imx->rx = spi_imx_buf_rx_u32;
-			spi_imx->tx = spi_imx_buf_tx_u32;
-		}
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
 	}
 
 	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
@@ -1028,8 +920,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	else
 		spi_imx->usedma = 0;
 
-	spi_imx->bpw_w = DIV_ROUND_UP(config.bpw, 8);
-
 	if (spi_imx->usedma) {
 		ret = spi_imx_dma_configure(spi->master,
 					    spi_imx_bytes_per_word(config.bpw));
@@ -1204,27 +1094,6 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 	spi_imx->count = transfer->len;
 	spi_imx->txfifo = 0;
 
-	if (spi_imx->dynamic_burst) {
-		if (spi_imx->count > MX51_ECSPI_CTRL_MAX_BURST)
-			spi_imx->count_index = spi_imx->count %
-					       MX51_ECSPI_CTRL_MAX_BURST;
-		else
-			spi_imx->count_index = spi_imx->count % sizeof(u32);
-
-		switch (spi_imx->bpw_w) {
-		case 1:
-			spi_imx_u32_swap_u8(transfer,
-					    (u32 *)transfer->tx_buf);
-			break;
-		case 2:
-			spi_imx_u32_swap_u16(transfer,
-					     (u32 *)transfer->tx_buf);
-			break;
-		default:
-			break;
-		}
-	}
-
 	reinit_completion(&spi_imx->xfer_done);
 
 	spi_imx_push(spi_imx);
@@ -1241,22 +1110,6 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 		return -ETIMEDOUT;
 	}
 
-	if (spi_imx->dynamic_burst) {
-		switch (spi_imx->bpw_w) {
-		case 1:
-			spi_imx_u32_swap_u8(transfer,
-					    (u32 *)transfer->rx_buf);
-			break;
-		case 2:
-			spi_imx_u32_swap_u16(transfer,
-					     (u32 *)transfer->rx_buf);
-			break;
-		default:
-			break;
-		}
-		spi_imx->dynamic_burst = 0;
-	}
-
 	return transfer->len;
 }
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-05-23 18:22 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-23 12:38 [PATCH] Revert "spi: imx: dynamic burst length adjust for PIO mode" Sascha Hauer
     [not found] ` <20170523123827.22408-1-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-05-23 18:22   ` Mark Brown
2017-05-23 18:22   ` Applied "spi: imx: Revert "spi: imx: dynamic burst length adjust for PIO mode"" to the spi tree Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).