[PATCH] spi: lpspi: Add i.MX8 boards support for lpspi

[PATCH] spi: lpspi: Add i.MX8 boards support for lpspi

[Clark Wang]

Add both ipg and per clock for lpspi to support i.MX8QM/QXP boards.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
 drivers/spi/spi-fsl-lpspi.c | 52 +++++++++++++++++++++++++++++--------
 1 file changed, 41 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 08dcc3c22e88..5802f188051b 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -80,7 +80,8 @@ struct lpspi_config {
 struct fsl_lpspi_data {
 	struct device *dev;
 	void __iomem *base;
-	struct clk *clk;
+	struct clk *clk_ipg;
+	struct clk *clk_per;
 	bool is_slave;
 
 	void *rx_buf;
@@ -147,8 +148,19 @@ static int lpspi_prepare_xfer_hardware(struct spi_controller *controller)
 {
 	struct fsl_lpspi_data *fsl_lpspi =
 				spi_controller_get_devdata(controller);
+	int ret;
+
+	ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(fsl_lpspi->clk_per);
+	if (ret) {
+		clk_disable_unprepare(fsl_lpspi->clk_ipg);
+		return ret;
+	}
 
-	return clk_prepare_enable(fsl_lpspi->clk);
+	return 0;
 }
 
 static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
@@ -156,7 +168,8 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
 	struct fsl_lpspi_data *fsl_lpspi =
 				spi_controller_get_devdata(controller);
 
-	clk_disable_unprepare(fsl_lpspi->clk);
+	clk_disable_unprepare(fsl_lpspi->clk_ipg);
+	clk_disable_unprepare(fsl_lpspi->clk_per);
 
 	return 0;
 }
@@ -249,7 +262,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 	unsigned int perclk_rate, scldiv;
 	u8 prescale;
 
-	perclk_rate = clk_get_rate(fsl_lpspi->clk);
+	perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
 	for (prescale = 0; prescale < 8; prescale++) {
 		scldiv = perclk_rate /
 			 (clkdivs[prescale] * config.speed_hz) - 2;
@@ -522,15 +535,30 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 		goto out_controller_put;
 	}
 
-	fsl_lpspi->clk = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(fsl_lpspi->clk)) {
-		ret = PTR_ERR(fsl_lpspi->clk);
+	fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(fsl_lpspi->clk_per)) {
+		ret = PTR_ERR(fsl_lpspi->clk_per);
+		goto out_controller_put;
+	}
+
+	fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(fsl_lpspi->clk_ipg)) {
+		ret = PTR_ERR(fsl_lpspi->clk_ipg);
+		goto out_controller_put;
+	}
+
+	ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"can't enable lpspi ipg clock, ret=%d\n", ret);
 		goto out_controller_put;
 	}
 
-	ret = clk_prepare_enable(fsl_lpspi->clk);
+	ret = clk_prepare_enable(fsl_lpspi->clk_per);
 	if (ret) {
-		dev_err(&pdev->dev, "can't enable lpspi clock, ret=%d\n", ret);
+		dev_err(&pdev->dev,
+			"can't enable lpspi per clock, ret=%d\n", ret);
+		clk_disable_unprepare(fsl_lpspi->clk_ipg);
 		goto out_controller_put;
 	}
 
@@ -538,7 +566,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	fsl_lpspi->txfifosize = 1 << (temp & 0x0f);
 	fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f);
 
-	clk_disable_unprepare(fsl_lpspi->clk);
+	clk_disable_unprepare(fsl_lpspi->clk_per);
+	clk_disable_unprepare(fsl_lpspi->clk_ipg);
 
 	ret = devm_spi_register_controller(&pdev->dev, controller);
 	if (ret < 0) {
@@ -560,7 +589,8 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
 	struct fsl_lpspi_data *fsl_lpspi =
 				spi_controller_get_devdata(controller);
 
-	clk_disable_unprepare(fsl_lpspi->clk);
+	clk_disable_unprepare(fsl_lpspi->clk_per);
+	clk_disable_unprepare(fsl_lpspi->clk_ipg);
 
 	return 0;
 }
-- 
2.17.1

Re: [PATCH] spi: lpspi: Add i.MX8 boards support for lpspi

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 197 bytes --]

On Tue, Dec 04, 2018 at 05:33:38AM +0000, Clark Wang wrote:
> Add both ipg and per clock for lpspi to support i.MX8QM/QXP boards.

This doesn't apply against current code, please check and resend.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]