linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: broonie@kernel.org
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	eha@deif.com, angelo@sysam.it, andrew.smirnov@gmail.com,
	gustavo@embeddedor.com, weic@nvidia.com, mhosny@nvidia.com
Subject: [PATCH 06/12] spi: spi-fsl-dspi: Implement .max_message_size method for EOQ mode
Date: Thu,  5 Mar 2020 00:00:38 +0200	[thread overview]
Message-ID: <20200304220044.11193-7-olteanv@gmail.com> (raw)
In-Reply-To: <20200304220044.11193-1-olteanv@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

When it gets set, End Of Queue Flag halts the DSPI controller and forces
the chip select signal to deassert.

This operating mode is not ideal, but it is used for the DSPI
instantiations where there is no other notification from the controller
that the data in the FIFO has finished transmission. So in practice, it
means that transmitting buffers larger than the FIFO size will yield
unpredictable results.

The only controller that operates in EOQ mode is MCF5441X (Coldfire). I
would say that the way EOQ is used (and documented in the reference
manual, too) on this chip is incorrect, and I would personally migrate
it to TCFQ, but that's notably worse in terms of performance (it can
only use 1 entry of the 16-deep FIFO) and if this limitation didn't
bother any Coldfire DSPI user so far, it's likely that we just need to
throw an error for larger buffers to make sure that callers are aware
their transfers are getting truncated/split.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/spi/spi-fsl-dspi.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index f37090ad7ad1..158cb48c0f4a 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1084,6 +1084,22 @@ static int dspi_slave_abort(struct spi_master *master)
 	return 0;
 }
 
+/*
+ * EOQ mode will inevitably deassert its PCS signal on last word in a queue
+ * (hardware limitation), so we need to inform the spi_device that larger
+ * buffers than the FIFO size are going to have the chip select randomly
+ * toggling, so it has a chance to adapt its message sizes.
+ */
+static size_t dspi_max_message_size(struct spi_device *spi)
+{
+	struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
+
+	if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
+		return dspi->devtype_data->fifo_size;
+
+	return SIZE_MAX;
+}
+
 static int dspi_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1105,6 +1121,7 @@ static int dspi_probe(struct platform_device *pdev)
 
 	ctlr->setup = dspi_setup;
 	ctlr->transfer_one_message = dspi_transfer_one_message;
+	ctlr->max_message_size = dspi_max_message_size;
 	ctlr->dev.of_node = pdev->dev.of_node;
 
 	ctlr->cleanup = dspi_cleanup;
-- 
2.17.1

  parent reply	other threads:[~2020-03-04 22:00 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-04 22:00 [PATCH 00/12] TCFQ to XSPI migration for NXP DSPI driver Vladimir Oltean
2020-03-04 22:00 ` [PATCH 01/12] spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics Vladimir Oltean
     [not found]   ` <20200304220044.11193-2-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:38     ` Applied "spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 02/12] spi: spi-fsl-dspi: Remove unused chip->void_write_data Vladimir Oltean
     [not found]   ` <20200304220044.11193-3-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Remove unused chip->void_write_data" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 03/12] spi: spi-fsl-dspi: Don't mask off undefined bits Vladimir Oltean
     [not found]   ` <20200304220044.11193-4-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Don't mask off undefined bits" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 04/12] spi: spi-fsl-dspi: Add comments around dspi_pop_tx and dspi_push_rx functions Vladimir Oltean
     [not found]   ` <20200304220044.11193-5-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Add comments around dspi_pop_tx and dspi_push_rx functions" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 05/12] spi: spi-fsl-dspi: Rename fifo_{read,write} and {tx,cmd}_fifo_write Vladimir Oltean
     [not found]   ` <20200304220044.11193-6-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Rename fifo_{read,write} and {tx,cmd}_fifo_write" to the spi tree Mark Brown
2020-03-04 22:00 ` Vladimir Oltean [this message]
     [not found]   ` <20200304220044.11193-7-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Implement .max_message_size method for EOQ mode" " Mark Brown
2020-03-04 22:00 ` [PATCH 07/12] spi: Do spi_take_timestamp_pre for as many times as necessary Vladimir Oltean
     [not found]   ` <20200304220044.11193-8-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 12:12     ` Mark Brown
2020-03-05 13:00       ` Vladimir Oltean
     [not found]         ` <CA+h21hq8c50AjuzgpxyPQDCFiAdezJuqgY0+u26qBRx9FnYnig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-05 13:04           ` Mark Brown
     [not found]             ` <20200305130448.GC4046-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2020-03-05 13:13               ` Vladimir Oltean
     [not found]                 ` <CA+h21hrSe-jT_R9jCW1XA6aZ=vjMX=b7HLq3KJdfxi9OOFW5ag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-05 13:16                   ` Mark Brown
2020-03-05 14:37     ` Applied "spi: Do spi_take_timestamp_pre for as many times as necessary" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 08/12] spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode Vladimir Oltean
2020-03-05 14:37   ` Applied "spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 09/12] spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible Vladimir Oltean
     [not found]   ` <20200304220044.11193-10-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 10/12] spi: spi-fsl-dspi: Optimize dspi_setup_accel for lowest interrupt count Vladimir Oltean
     [not found]   ` <20200304220044.11193-11-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Optimize dspi_setup_accel for lowest interrupt count" to the spi tree Mark Brown
     [not found] ` <20200304220044.11193-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-04 22:00   ` [PATCH 11/12] spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode Vladimir Oltean
2020-03-05 14:37     ` Applied "spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode" to the spi tree Mark Brown
2020-03-04 22:00   ` [PATCH 12/12] spi: spi-fsl-dspi: Take software timestamp in dspi_fifo_write Vladimir Oltean
     [not found]     ` <20200304220044.11193-13-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37       ` Applied "spi: spi-fsl-dspi: Take software timestamp in dspi_fifo_write" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200304220044.11193-7-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=angelo@sysam.it \
    --cc=broonie@kernel.org \
    --cc=eha@deif.com \
    --cc=gustavo@embeddedor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mhosny@nvidia.com \
    --cc=weic@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).