From: Vladimir Oltean <olteanv@gmail.com>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>,
Esben Haabendal <eha@deif.com>,
angelo@sysam.it, andrew.smirnov@gmail.com,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>,
Wei Chen <weic@nvidia.com>, Mohamed Hosny <mhosny@nvidia.com>
Subject: Re: [PATCH 07/12] spi: Do spi_take_timestamp_pre for as many times as necessary
Date: Thu, 5 Mar 2020 15:00:22 +0200 [thread overview]
Message-ID: <CA+h21hq8c50AjuzgpxyPQDCFiAdezJuqgY0+u26qBRx9FnYnig@mail.gmail.com> (raw)
In-Reply-To: <20200305121202.GB4046@sirena.org.uk>
Hi Mark,
On Thu, 5 Mar 2020 at 14:12, Mark Brown <broonie@kernel.org> wrote:
>
> On Thu, Mar 05, 2020 at 12:00:39AM +0200, Vladimir Oltean wrote:
> > From: Vladimir Oltean <vladimir.oltean@nxp.com>
> >
> > When dealing with a SPI controller driver that is sending more than 1
> > byte at once (or the entire buffer at once), and the SPI peripheral
> > driver has requested timestamping for a byte in the middle of the
> > buffer, we find that spi_take_timestamp_pre never records a "pre"
> > timestamp.
>
> This is a fix and so should have been at the start of the series to make
> sure there aren't any dependencies.
My reasoning for not submitting it as a fix is:
- The only driver that uses the functionality so far - spi-fsl-dspi -
has worked thus far even with the limitation that only byte-by-byte
transfers were supported properly.
- I removed the limitation before actually changing the operating mode
of spi-fsl-dspi. Therefore the limitation is effectively never seen.
- New SPI drivers that would want to make use of software timestamping
would do so through your SPI for-next branch anyway, where the
limitation would be, again, fixed.
Thanks,
-Vladimir
next prev parent reply other threads:[~2020-03-05 13:00 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 22:00 [PATCH 00/12] TCFQ to XSPI migration for NXP DSPI driver Vladimir Oltean
2020-03-04 22:00 ` [PATCH 01/12] spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics Vladimir Oltean
[not found] ` <20200304220044.11193-2-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:38 ` Applied "spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 02/12] spi: spi-fsl-dspi: Remove unused chip->void_write_data Vladimir Oltean
[not found] ` <20200304220044.11193-3-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Remove unused chip->void_write_data" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 03/12] spi: spi-fsl-dspi: Don't mask off undefined bits Vladimir Oltean
[not found] ` <20200304220044.11193-4-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Don't mask off undefined bits" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 04/12] spi: spi-fsl-dspi: Add comments around dspi_pop_tx and dspi_push_rx functions Vladimir Oltean
[not found] ` <20200304220044.11193-5-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Add comments around dspi_pop_tx and dspi_push_rx functions" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 05/12] spi: spi-fsl-dspi: Rename fifo_{read,write} and {tx,cmd}_fifo_write Vladimir Oltean
[not found] ` <20200304220044.11193-6-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Rename fifo_{read,write} and {tx,cmd}_fifo_write" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 06/12] spi: spi-fsl-dspi: Implement .max_message_size method for EOQ mode Vladimir Oltean
[not found] ` <20200304220044.11193-7-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Implement .max_message_size method for EOQ mode" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 07/12] spi: Do spi_take_timestamp_pre for as many times as necessary Vladimir Oltean
[not found] ` <20200304220044.11193-8-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 12:12 ` Mark Brown
2020-03-05 13:00 ` Vladimir Oltean [this message]
[not found] ` <CA+h21hq8c50AjuzgpxyPQDCFiAdezJuqgY0+u26qBRx9FnYnig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-05 13:04 ` Mark Brown
[not found] ` <20200305130448.GC4046-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2020-03-05 13:13 ` Vladimir Oltean
[not found] ` <CA+h21hrSe-jT_R9jCW1XA6aZ=vjMX=b7HLq3KJdfxi9OOFW5ag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-05 13:16 ` Mark Brown
2020-03-05 14:37 ` Applied "spi: Do spi_take_timestamp_pre for as many times as necessary" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 08/12] spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode Vladimir Oltean
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 09/12] spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible Vladimir Oltean
[not found] ` <20200304220044.11193-10-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 10/12] spi: spi-fsl-dspi: Optimize dspi_setup_accel for lowest interrupt count Vladimir Oltean
[not found] ` <20200304220044.11193-11-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Optimize dspi_setup_accel for lowest interrupt count" to the spi tree Mark Brown
[not found] ` <20200304220044.11193-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-04 22:00 ` [PATCH 11/12] spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode Vladimir Oltean
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode" to the spi tree Mark Brown
2020-03-04 22:00 ` [PATCH 12/12] spi: spi-fsl-dspi: Take software timestamp in dspi_fifo_write Vladimir Oltean
[not found] ` <20200304220044.11193-13-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-05 14:37 ` Applied "spi: spi-fsl-dspi: Take software timestamp in dspi_fifo_write" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+h21hq8c50AjuzgpxyPQDCFiAdezJuqgY0+u26qBRx9FnYnig@mail.gmail.com \
--to=olteanv@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=angelo@sysam.it \
--cc=broonie@kernel.org \
--cc=eha@deif.com \
--cc=gustavo@embeddedor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mhosny@nvidia.com \
--cc=weic@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).