[PATCH AUTOSEL 5.9 021/111] spi: fsi: Fix clock running too fast

[PATCH AUTOSEL 5.9 021/111] spi: fsi: Fix clock running too fast

[Sasha Levin]

From: Brad Bishop <bradleyb@fuzziesquirrel.com>

[ Upstream commit 0b546bbe9474ff23e6843916ad6d567f703b2396 ]

Use a clock divider tuned to a 200MHz FSI bus frequency (the maximum). Use
of the previous divider at 200MHz results in corrupt data from endpoint
devices. Ideally the clock divider would be calculated from the FSI clock,
but that would require some significant work on the FSI driver. With FSI
frequencies slower than 200MHz, the SPI clock will simply run slower, but
safely.

Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-3-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 37a3e0f8e7526..6e6b3c6437288 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -350,7 +350,7 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
 	u64 status = 0ULL;
 	u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE |
 		SPI_FSI_CLOCK_CFG_SCK_NO_DEL |
-		FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 4);
+		FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 19);
 
 	end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS);
 	do {
-- 
2.25.1