* [PATCH] [v3] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
@ 2021-04-15 7:17 Dinghao Liu
2021-04-15 7:27 ` quanyang.wang
0 siblings, 1 reply; 2+ messages in thread
From: Dinghao Liu @ 2021-04-15 7:17 UTC (permalink / raw)
To: dinghao.liu, kjlu
Cc: quanyang.wang, Mark Brown, Michal Simek, Naga Sureshkumar Relli,
Shubhrajyoti Datta, linux-spi, linux-arm-kernel, linux-kernel
There is a PM usage counter decrement after zynqmp_qspi_init_hw()
without any refcount increment, which leads to refcount leak.Add
a refcount increment to balance the refcount. Also set
auto_runtime_pm to resume suspended spi controller.
Fixes: 9e3a000362aec ("spi: zynqmp: Add pm runtime support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
---
Changelog:
v2: - Add a refcount increment to fix refcout leak instead of the
refcount decrement on error.
Set ctlr->auto_runtime_pm = true.
v3: - Add fix tag.
Add a return value check against pm_runtime_get_sync().
Move pm_runtime_{mark_last_busy & put_autosuspend} to the
end of current function.
---
drivers/spi/spi-zynqmp-gqspi.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index c8fa6ee18ae7..781ef3fc76e2 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1160,11 +1160,14 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ goto clk_dis_all;
+
/* QSPI controller initializations */
zynqmp_qspi_init_hw(xqspi);
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
@@ -1187,6 +1190,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
ctlr->dev.of_node = np;
+ ctlr->auto_runtime_pm = true;
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret) {
@@ -1194,9 +1198,13 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
clk_dis_all:
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(xqspi->refclk);
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] [v3] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
2021-04-15 7:17 [PATCH] [v3] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe Dinghao Liu
@ 2021-04-15 7:27 ` quanyang.wang
0 siblings, 0 replies; 2+ messages in thread
From: quanyang.wang @ 2021-04-15 7:27 UTC (permalink / raw)
To: Dinghao Liu, kjlu
Cc: Mark Brown, Michal Simek, Naga Sureshkumar Relli,
Shubhrajyoti Datta, linux-spi, linux-arm-kernel, linux-kernel
Hi Dinghao,
On 4/15/21 3:17 PM, Dinghao Liu wrote:
> There is a PM usage counter decrement after zynqmp_qspi_init_hw()
> without any refcount increment, which leads to refcount leak.Add
> a refcount increment to balance the refcount. Also set
> auto_runtime_pm to resume suspended spi controller.
>
> Fixes: 9e3a000362aec ("spi: zynqmp: Add pm runtime support")
> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
> ---
>
> Changelog:
>
> v2: - Add a refcount increment to fix refcout leak instead of the
> refcount decrement on error.
> Set ctlr->auto_runtime_pm = true.
>
> v3: - Add fix tag.
> Add a return value check against pm_runtime_get_sync().
> Move pm_runtime_{mark_last_busy & put_autosuspend} to the
> end of current function.
> ---
> drivers/spi/spi-zynqmp-gqspi.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
> index c8fa6ee18ae7..781ef3fc76e2 100644
> --- a/drivers/spi/spi-zynqmp-gqspi.c
> +++ b/drivers/spi/spi-zynqmp-gqspi.c
> @@ -1160,11 +1160,14 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
> pm_runtime_set_active(&pdev->dev);
> pm_runtime_enable(&pdev->dev);
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + goto clk_dis_all;
Would you please add some error info output here? Just like:
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to pm_runtime_get_sync:
%d\n", ret);
+ goto clk_dis_all;
+ }
Because sometimes it is very helpful to analyse probe failure.
Thanks,
Quanyang
> +
> /* QSPI controller initializations */
> zynqmp_qspi_init_hw(xqspi);
>
> - pm_runtime_mark_last_busy(&pdev->dev);
> - pm_runtime_put_autosuspend(&pdev->dev);
> xqspi->irq = platform_get_irq(pdev, 0);
> if (xqspi->irq <= 0) {
> ret = -ENXIO;
> @@ -1187,6 +1190,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
> SPI_TX_DUAL | SPI_TX_QUAD;
> ctlr->dev.of_node = np;
> + ctlr->auto_runtime_pm = true;
>
> ret = devm_spi_register_controller(&pdev->dev, ctlr);
> if (ret) {
> @@ -1194,9 +1198,13 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> goto clk_dis_all;
> }
>
> + pm_runtime_mark_last_busy(&pdev->dev);
> + pm_runtime_put_autosuspend(&pdev->dev);
> +
> return 0;
>
> clk_dis_all:
> + pm_runtime_put_sync(&pdev->dev);
> pm_runtime_set_suspended(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> clk_disable_unprepare(xqspi->refclk);
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-15 7:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-15 7:17 [PATCH] [v3] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe Dinghao Liu
2021-04-15 7:27 ` quanyang.wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).