[PATCH AUTOSEL 5.4 03/34] spi: ath79: always call chipselect function

[PATCH AUTOSEL 5.4 03/34] spi: ath79: always call chipselect function

[Sasha Levin]

From: David Bauer <mail@david-bauer.net>

[ Upstream commit 19e2132174583beb90c1bd3e9c842bc6d5c944d1 ]

spi-bitbang has to call the chipselect function on the ath79 SPI driver
in order to communicate with the SPI slave device, as the ath79 SPI
driver has three dedicated chipselect lines but can also be used with
GPIOs for the CS lines.

Fixes commit 4a07b8bcd503 ("spi: bitbang: Make chipselect callback optional")

Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210303160837.165771-1-mail@david-bauer.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-ath79.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index eb9a243e9526..436327fb58de 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -158,6 +158,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
 	master->setup = spi_bitbang_setup;
 	master->cleanup = spi_bitbang_cleanup;
+	master->flags = SPI_MASTER_GPIO_SS;
 	if (pdata) {
 		master->bus_num = pdata->bus_num;
 		master->num_chipselect = pdata->num_chipselect;
-- 
2.30.2

[PATCH AUTOSEL 5.4 04/34] spi: ath79: remove spi-master setup and cleanup assignment

[Sasha Levin]

From: David Bauer <mail@david-bauer.net>

[ Upstream commit ffb597b2bd3cd78b9bfb68f536743cd46dbb2cc4 ]

This removes the assignment of setup and cleanup functions for the ath79
target. Assigning the setup-method will lead to 'setup_transfer' not
being assigned in spi_bitbang_init. Because of this, performing any
TX/RX operation will lead to a kernel oops.

Also drop the redundant cleanup assignment, as it's also assigned in
spi_bitbang_init.

Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210303160837.165771-2-mail@david-bauer.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-ath79.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 436327fb58de..98ace748cd98 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -156,8 +156,6 @@ static int ath79_spi_probe(struct platform_device *pdev)
 
 	master->use_gpio_descriptors = true;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->setup = spi_bitbang_setup;
-	master->cleanup = spi_bitbang_cleanup;
 	master->flags = SPI_MASTER_GPIO_SS;
 	if (pdata) {
 		master->bus_num = pdata->bus_num;
-- 
2.30.2

[PATCH AUTOSEL 5.4 21/34] spi: dln2: Fix reference leak to master

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 9b844b087124c1538d05f40fda8a4fec75af55be ]

Call spi_master_get() holds the reference count to master device, thus
we need an additional spi_master_put() call to reduce the reference
count, otherwise we will leak a reference to master.

This commit fix it by removing the unnecessary spi_master_get().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409082955.2907950-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dln2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dln2.c b/drivers/spi/spi-dln2.c
index 75b33d7d14b0..9a4d942fafcf 100644
--- a/drivers/spi/spi-dln2.c
+++ b/drivers/spi/spi-dln2.c
@@ -780,7 +780,7 @@ static int dln2_spi_probe(struct platform_device *pdev)
 
 static int dln2_spi_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct spi_master *master = platform_get_drvdata(pdev);
 	struct dln2_spi *dln2 = spi_master_get_devdata(master);
 
 	pm_runtime_disable(&pdev->dev);
-- 
2.30.2

[PATCH AUTOSEL 5.4 22/34] spi: omap-100k: Fix reference leak to master

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit a23faea76d4cf5f75decb574491e66f9ecd707e7 ]

Call spi_master_get() holds the reference count to master device, thus
we need an additional spi_master_put() call to reduce the reference
count, otherwise we will leak a reference to master.

This commit fix it by removing the unnecessary spi_master_get().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409082954.2906933-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap-100k.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index b955ca8796d2..b8e201c09484 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -426,7 +426,7 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
 
 static int omap1_spi100k_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+	struct spi_master *master = platform_get_drvdata(pdev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 
 	pm_runtime_disable(&pdev->dev);
@@ -440,7 +440,7 @@ static int omap1_spi100k_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int omap1_spi100k_runtime_suspend(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 
 	clk_disable_unprepare(spi100k->ick);
@@ -451,7 +451,7 @@ static int omap1_spi100k_runtime_suspend(struct device *dev)
 
 static int omap1_spi100k_runtime_resume(struct device *dev)
 {
-	struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
 	int ret;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 23/34] spi: qup: fix PM reference leak in spi_qup_remove()

[Sasha Levin]

From: Wang Li <wangli74@huawei.com>

[ Upstream commit cec77e0a249892ceb10061bf17b63f9fb111d870 ]

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409095458.29921-1-wangli74@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-qup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index fa8079fbea77..d1dfb52008b4 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -1263,7 +1263,7 @@ static int spi_qup_remove(struct platform_device *pdev)
 	struct spi_qup *controller = spi_master_get_devdata(master);
 	int ret;
 
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret < 0)
 		return ret;
 
-- 
2.30.2