[PATCH v11 33/34] ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x

From: Dmitry Osipenko <digetx@gmail.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Ulf Hansson" <ulf.hansson@linaro.org>,
	"Viresh Kumar" <vireshk@kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Peter De Schrijver" <pdeschrijver@nvidia.com>,
	"Mikko Perttunen" <mperttunen@nvidia.com>,
	"Peter Chen" <peter.chen@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Nishanth Menon" <nm@ti.com>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Lucas Stach" <dev@lynxeye.de>, "Stefan Agner" <stefan@agner.ch>,
	"Adrian Hunter" <adrian.hunter@intel.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>
Cc: linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-staging@lists.linux.dev, linux-spi@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-mtd@lists.infradead.org,
	linux-mmc@vger.kernel.org, linux-media@vger.kernel.org,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: [PATCH v11 33/34] ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
Date: Sun, 12 Sep 2021 23:08:31 +0300	[thread overview]
Message-ID: <20210912200832.12312-34-digetx@gmail.com> (raw)
In-Reply-To: <20210912200832.12312-1-digetx@gmail.com>

Memory access must be blocked before hardware reset is asserted and before
power is gated, otherwise a serious hardware fault is inevitable. Add
reset for memory clients to the GR2D, GR3D and Host1x nodes.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra30.dtsi | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 9c7616abaa2e..58ef4983e511 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -123,8 +123,8 @@ host1x@50000000 {
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 		operating-points-v2 = <&host1x_dvfs_opp_table>;
 		power-domains = <&pd_heg>;
@@ -190,8 +190,8 @@ gr2d@54140000 {
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+			reset-names = "2d", "mc";
 			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 			power-domains = <&pd_heg>;
 
@@ -205,8 +205,10 @@ gr3d@54180000 {
 				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-				 <&tegra_car 98>;
-			reset-names = "3d", "3d2";
+				 <&tegra_car 98>,
+				 <&mc TEGRA30_MC_RESET_3D>,
+				 <&mc TEGRA30_MC_RESET_3D2>;
+			reset-names = "3d", "3d2", "mc", "mc2";
 			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 			power-domains = <&pd_3d0>, <&pd_3d1>;
 			power-domain-names = "3d0", "3d1";
-- 
2.32.0

