linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>,
	"Tao Ren" <rentao.bupt@gmail.com>,
	"Jae Hyun Yoo" <quic_jaehyoo@quicinc.com>
Subject: [PATCH v6 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
Date: Tue,  3 May 2022 08:06:24 +0200	[thread overview]
Message-ID: <20220503060634.122722-2-clg@kaod.org> (raw)
In-Reply-To: <20220503060634.122722-1-clg@kaod.org>

This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.

Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++----
 arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++------
 arch/arm/boot/dts/aspeed-g6.dtsi | 9 +++------
 3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa8b581c3d6c..3b7b98e787e7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,8 +54,7 @@ ahb {
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
@@ -91,8 +90,7 @@ flash@4 {
 		};
 
 		spi: spi@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 4147b397c883..1e727cbaab14 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,8 +55,7 @@ ahb {
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
@@ -84,8 +83,7 @@ flash@2 {
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -106,8 +104,7 @@ flash@1 {
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..6ae5dfecbdf1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -95,8 +95,7 @@ gic: interrupt-controller@40461000 {
 			};
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-fmc";
@@ -124,8 +123,7 @@ flash@2 {
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -146,8 +144,7 @@ flash@1 {
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x50000000 0x10000000 >;
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
-- 
2.35.1


  reply	other threads:[~2022-05-03  6:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03  6:06 [PATCH v6 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-03  6:06 ` Cédric Le Goater [this message]
2022-05-03  6:06 ` [PATCH v6 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-03 17:55   ` Rob Herring
2022-05-08  7:14     ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 04/11] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 05/11] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 06/11] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 07/11] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 08/11] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220503060634.122722-2-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=chin-ting_kuo@aspeedtech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=quic_jaehyoo@quicinc.com \
    --cc=rentao.bupt@gmail.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).