[PATCH] spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode

[PATCH] spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode

[Christophe Leroy]

Commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO
descriptors") broke fsl spi driver.

As now we fully rely on gpiolib for handling the polarity of
chip selects, the driver shall not alter the GPIO value anymore
when SPI_CS_HIGH is not set in spi->mode.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 drivers/spi/spi-fsl-spi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 649766808caf..9e297b2715f6 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -115,14 +115,13 @@ static void fsl_spi_chipselect(struct spi_device *spi, int value)
 {
 	struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	struct fsl_spi_platform_data *pdata;
-	bool pol = spi->mode & SPI_CS_HIGH;
 	struct spi_mpc8xxx_cs	*cs = spi->controller_state;
 
 	pdata = spi->dev.parent->parent->platform_data;
 
 	if (value == BITBANG_CS_INACTIVE) {
 		if (pdata->cs_control)
-			pdata->cs_control(spi, !pol);
+			pdata->cs_control(spi, false);
 	}
 
 	if (value == BITBANG_CS_ACTIVE) {
@@ -134,7 +133,7 @@ static void fsl_spi_chipselect(struct spi_device *spi, int value)
 		fsl_spi_change_mode(spi);
 
 		if (pdata->cs_control)
-			pdata->cs_control(spi, pol);
+			pdata->cs_control(spi, true);
 	}
 }
 
-- 
2.25.0

Re: [PATCH] spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode

[Mark Brown]

On Thu, 14 Jan 2021 13:09:37 +0000 (UTC), Christophe Leroy wrote:
> Commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO
> descriptors") broke fsl spi driver.
> 
> As now we fully rely on gpiolib for handling the polarity of
> chip selects, the driver shall not alter the GPIO value anymore
> when SPI_CS_HIGH is not set in spi->mode.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
      commit: 7a2da5d7960a64ee923fe3e31f01a1101052c66f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark