linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
* [PATCH] staging: r8188eu: remove if_ether.h header file
@ 2021-08-22 16:44 Michael Straube
  2021-08-23 22:16 ` Phillip Potter
  2021-08-23 23:51 ` Michael Straube
  0 siblings, 2 replies; 3+ messages in thread
From: Michael Straube @ 2021-08-22 16:44 UTC (permalink / raw)
  To: gregkh
  Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging,
	linux-kernel, Michael Straube

All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
 drivers/staging/r8188eu/core/rtw_recv.c      |  1 -
 drivers/staging/r8188eu/hal/rtl8188eu_recv.c |  1 -
 drivers/staging/r8188eu/include/if_ether.h   | 94 --------------------
 drivers/staging/r8188eu/os_dep/xmit_linux.c  |  1 -
 4 files changed, 97 deletions(-)
 delete mode 100644 drivers/staging/r8188eu/include/if_ether.h

diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index 52236bae8693..08066c9587f9 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -8,7 +8,6 @@
 #include "../include/recv_osdep.h"
 #include "../include/mlme_osdep.h"
 #include "../include/ip.h"
-#include "../include/if_ether.h"
 #include "../include/ethernet.h"
 #include "../include/usb_ops.h"
 #include "../include/wifi.h"
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
index a44c9598186c..3a2c7090cd7b 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
@@ -7,7 +7,6 @@
 #include "../include/recv_osdep.h"
 #include "../include/mlme_osdep.h"
 #include "../include/ip.h"
-#include "../include/if_ether.h"
 #include "../include/ethernet.h"
 
 #include "../include/usb_ops.h"
diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
deleted file mode 100644
index 5bb79fddeec6..000000000000
--- a/drivers/staging/r8188eu/include/if_ether.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/* Copyright(c) 2007 - 2011 Realtek Corporation. */
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet  */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet   */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP		*/
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames			*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type	*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames			*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	unsigned short	h_proto;		/* packet type ID field	*/
-};
-
-struct _vlan {
-	unsigned short       h_vlan_TCI;	/*  Encap prio and VLAN ID */
-	unsigned short       h_vlan_encapsulated_proto;
-};
-
-#define get_vlan_id(pvlan)				\
-	((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
-#define get_vlan_priority(pvlan)			\
-	((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
-#define get_vlan_encap_proto(pvlan)			\
-	 (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
-
-#endif	/* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
index 60e0eea7ad84..d35e92c17a5e 100644
--- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
@@ -5,7 +5,6 @@
 
 #include "../include/osdep_service.h"
 #include "../include/drv_types.h"
-#include "../include/if_ether.h"
 #include "../include/ip.h"
 #include "../include/wifi.h"
 #include "../include/mlme_osdep.h"
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] staging: r8188eu: remove if_ether.h header file
  2021-08-22 16:44 [PATCH] staging: r8188eu: remove if_ether.h header file Michael Straube
@ 2021-08-23 22:16 ` Phillip Potter
  2021-08-23 23:51 ` Michael Straube
  1 sibling, 0 replies; 3+ messages in thread
From: Phillip Potter @ 2021-08-23 22:16 UTC (permalink / raw)
  To: Michael Straube
  Cc: Greg KH, Larry Finger, Martin Kaiser, Fabio M. De Francesco,
	open list:STAGING SUBSYSTEM, Linux Kernel Mailing List

On Sun, 22 Aug 2021 at 17:45, Michael Straube <straube.linux@gmail.com> wrote:
>
> All constants, declarations and macros in if_ether.h are either
> duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
> if_ether.h and its includes.
>
> Signed-off-by: Michael Straube <straube.linux@gmail.com>
> ---
>  drivers/staging/r8188eu/core/rtw_recv.c      |  1 -
>  drivers/staging/r8188eu/hal/rtl8188eu_recv.c |  1 -
>  drivers/staging/r8188eu/include/if_ether.h   | 94 --------------------
>  drivers/staging/r8188eu/os_dep/xmit_linux.c  |  1 -
>  4 files changed, 97 deletions(-)
>  delete mode 100644 drivers/staging/r8188eu/include/if_ether.h
>
> diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
> index 52236bae8693..08066c9587f9 100644
> --- a/drivers/staging/r8188eu/core/rtw_recv.c
> +++ b/drivers/staging/r8188eu/core/rtw_recv.c
> @@ -8,7 +8,6 @@
>  #include "../include/recv_osdep.h"
>  #include "../include/mlme_osdep.h"
>  #include "../include/ip.h"
> -#include "../include/if_ether.h"
>  #include "../include/ethernet.h"
>  #include "../include/usb_ops.h"
>  #include "../include/wifi.h"
> diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> index a44c9598186c..3a2c7090cd7b 100644
> --- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> +++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> @@ -7,7 +7,6 @@
>  #include "../include/recv_osdep.h"
>  #include "../include/mlme_osdep.h"
>  #include "../include/ip.h"
> -#include "../include/if_ether.h"
>  #include "../include/ethernet.h"
>
>  #include "../include/usb_ops.h"
> diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
> deleted file mode 100644
> index 5bb79fddeec6..000000000000
> --- a/drivers/staging/r8188eu/include/if_ether.h
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
> -/* Copyright(c) 2007 - 2011 Realtek Corporation. */
> -
> -#ifndef _LINUX_IF_ETHER_H
> -#define _LINUX_IF_ETHER_H
> -
> -/*
> - *     IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
> - *     and FCS/CRC (frame check sequence).
> - */
> -
> -#define ETH_ALEN       6               /* Octets in one ethernet addr   */
> -#define ETH_HLEN       14              /* Total octets in header.       */
> -#define ETH_ZLEN       60              /* Min. octets in frame sans FCS */
> -#define ETH_DATA_LEN   1500            /* Max. octets in payload        */
> -#define ETH_FRAME_LEN  1514            /* Max. octets in frame sans FCS */
> -
> -/*
> - *     These are the defined Ethernet Protocol ID's.
> - */
> -
> -#define ETH_P_LOOP     0x0060          /* Ethernet Loopback packet     */
> -#define ETH_P_PUP      0x0200          /* Xerox PUP packet             */
> -#define ETH_P_PUPAT    0x0201          /* Xerox PUP Addr Trans packet  */
> -#define ETH_P_IP       0x0800          /* Internet Protocol packet     */
> -#define ETH_P_X25      0x0805          /* CCITT X.25                   */
> -#define ETH_P_ARP      0x0806          /* Address Resolution packet    */
> -#define        ETH_P_BPQ       0x08FF          /* G8BPQ AX.25 Ethernet Packet  */
> -#define ETH_P_IEEEPUP  0x0a00          /* Xerox IEEE802.3 PUP packet   */
> -#define ETH_P_IEEEPUPAT        0x0a01          /* Xerox IEEE802.3 PUP          */
> -#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
> -#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
> -#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
> -#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
> -#define ETH_P_LAT       0x6004          /* DEC LAT                      */
> -#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
> -#define ETH_P_CUST      0x6006          /* DEC Customer use             */
> -#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
> -#define ETH_P_RARP      0x8035         /* Reverse Addr Res packet      */
> -#define ETH_P_ATALK    0x809B          /* Appletalk DDP                */
> -#define ETH_P_AARP     0x80F3          /* Appletalk AARP               */
> -#define ETH_P_8021Q    0x8100          /* 802.1Q VLAN Extended Header  */
> -#define ETH_P_IPX      0x8137          /* IPX over DIX                 */
> -#define ETH_P_IPV6     0x86DD          /* IPv6 over bluebook           */
> -#define ETH_P_PPP_DISC 0x8863          /* PPPoE discovery messages     */
> -#define ETH_P_PPP_SES  0x8864          /* PPPoE session messages       */
> -#define ETH_P_ATMMPOA  0x884c          /* MultiProtocol Over ATM       */
> -#define ETH_P_ATMFATE  0x8884          /* Frame-based ATM Transport
> -                                        * over Ethernet
> -                                        */
> -
> -/*
> - *     Non DIX types. Won't clash for 1500 types.
> - */
> -
> -#define ETH_P_802_3    0x0001          /* Dummy type for 802.3 frames  */
> -#define ETH_P_AX25     0x0002          /* Dummy protocol id for AX.25  */
> -#define ETH_P_ALL      0x0003          /* Every packet (be careful!!!) */
> -#define ETH_P_802_2    0x0004          /* 802.2 frames                 */
> -#define ETH_P_SNAP     0x0005          /* Internal only                */
> -#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
> -#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
> -#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
> -#define ETH_P_LOCALTALK 0x0009         /* Localtalk pseudo type        */
> -#define ETH_P_PPPTALK  0x0010          /* Dummy type for Atalk over PPP*/
> -#define ETH_P_TR_802_2 0x0011          /* 802.2 frames                 */
> -#define ETH_P_MOBITEX  0x0015          /* Mobitex (kaz@cafe.net)       */
> -#define ETH_P_CONTROL  0x0016          /* Card specific control frames */
> -#define ETH_P_IRDA     0x0017          /* Linux-IrDA                   */
> -#define ETH_P_ECONET   0x0018          /* Acorn Econet                 */
> -
> -/*
> - *     This is an Ethernet frame header.
> - */
> -
> -struct ethhdr {
> -       unsigned char   h_dest[ETH_ALEN];       /* destination eth addr */
> -       unsigned char   h_source[ETH_ALEN];     /* source ether addr    */
> -       unsigned short  h_proto;                /* packet type ID field */
> -};
> -
> -struct _vlan {
> -       unsigned short       h_vlan_TCI;        /*  Encap prio and VLAN ID */
> -       unsigned short       h_vlan_encapsulated_proto;
> -};
> -
> -#define get_vlan_id(pvlan)                             \
> -       ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
> -#define get_vlan_priority(pvlan)                       \
> -       ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
> -#define get_vlan_encap_proto(pvlan)                    \
> -        (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
> -
> -#endif /* _LINUX_IF_ETHER_H */
> diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> index 60e0eea7ad84..d35e92c17a5e 100644
> --- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
> +++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> @@ -5,7 +5,6 @@
>
>  #include "../include/osdep_service.h"
>  #include "../include/drv_types.h"
> -#include "../include/if_ether.h"
>  #include "../include/ip.h"
>  #include "../include/wifi.h"
>  #include "../include/mlme_osdep.h"
> --
> 2.32.0
>

Built and runtime tested, thanks.

Acked-by: Phillip Potter <phil@philpotter.co.uk>

Regards,
Phil

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] staging: r8188eu: remove if_ether.h header file
  2021-08-22 16:44 [PATCH] staging: r8188eu: remove if_ether.h header file Michael Straube
  2021-08-23 22:16 ` Phillip Potter
@ 2021-08-23 23:51 ` Michael Straube
  1 sibling, 0 replies; 3+ messages in thread
From: Michael Straube @ 2021-08-23 23:51 UTC (permalink / raw)
  To: gregkh
  Cc: Larry.Finger, phil, martin, fmdefrancesco, linux-staging, linux-kernel

On 8/22/21 6:44 PM, Michael Straube wrote:
> All constants, declarations and macros in if_ether.h are either
> duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
> if_ether.h and its includes.
> 
> Signed-off-by: Michael Straube <straube.linux@gmail.com>
> ---
>   drivers/staging/r8188eu/core/rtw_recv.c      |  1 -
>   drivers/staging/r8188eu/hal/rtl8188eu_recv.c |  1 -
>   drivers/staging/r8188eu/include/if_ether.h   | 94 --------------------
>   drivers/staging/r8188eu/os_dep/xmit_linux.c  |  1 -
>   4 files changed, 97 deletions(-)
>   delete mode 100644 drivers/staging/r8188eu/include/if_ether.h
> 
> diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
> index 52236bae8693..08066c9587f9 100644
> --- a/drivers/staging/r8188eu/core/rtw_recv.c
> +++ b/drivers/staging/r8188eu/core/rtw_recv.c
> @@ -8,7 +8,6 @@
>   #include "../include/recv_osdep.h"
>   #include "../include/mlme_osdep.h"
>   #include "../include/ip.h"
> -#include "../include/if_ether.h"
>   #include "../include/ethernet.h"
>   #include "../include/usb_ops.h"
>   #include "../include/wifi.h"
> diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> index a44c9598186c..3a2c7090cd7b 100644
> --- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> +++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> @@ -7,7 +7,6 @@
>   #include "../include/recv_osdep.h"
>   #include "../include/mlme_osdep.h"
>   #include "../include/ip.h"
> -#include "../include/if_ether.h"
>   #include "../include/ethernet.h"
>   
>   #include "../include/usb_ops.h"
> diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
> deleted file mode 100644
> index 5bb79fddeec6..000000000000
> --- a/drivers/staging/r8188eu/include/if_ether.h
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
> -/* Copyright(c) 2007 - 2011 Realtek Corporation. */
> -
> -#ifndef _LINUX_IF_ETHER_H
> -#define _LINUX_IF_ETHER_H
> -
> -/*
> - *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
> - *	and FCS/CRC (frame check sequence).
> - */
> -
> -#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
> -#define ETH_HLEN	14		/* Total octets in header.	 */
> -#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
> -#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
> -#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
> -
> -/*
> - *	These are the defined Ethernet Protocol ID's.
> - */
> -
> -#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
> -#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
> -#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
> -#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
> -#define ETH_P_X25	0x0805		/* CCITT X.25			*/
> -#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
> -#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet  */
> -#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet   */
> -#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP		*/
> -#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
> -#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
> -#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
> -#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
> -#define ETH_P_LAT       0x6004          /* DEC LAT                      */
> -#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
> -#define ETH_P_CUST      0x6006          /* DEC Customer use             */
> -#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
> -#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
> -#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
> -#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
> -#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
> -#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
> -#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
> -#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
> -#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
> -#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
> -#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
> -					 * over Ethernet
> -					 */
> -
> -/*
> - *	Non DIX types. Won't clash for 1500 types.
> - */
> -
> -#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
> -#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
> -#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
> -#define ETH_P_802_2	0x0004		/* 802.2 frames			*/
> -#define ETH_P_SNAP	0x0005		/* Internal only		*/
> -#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
> -#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
> -#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
> -#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type	*/
> -#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
> -#define ETH_P_TR_802_2	0x0011		/* 802.2 frames			*/
> -#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
> -#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
> -#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
> -#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
> -
> -/*
> - *	This is an Ethernet frame header.
> - */
> -
> -struct ethhdr {
> -	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
> -	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
> -	unsigned short	h_proto;		/* packet type ID field	*/
> -};
> -
> -struct _vlan {
> -	unsigned short       h_vlan_TCI;	/*  Encap prio and VLAN ID */
> -	unsigned short       h_vlan_encapsulated_proto;
> -};
> -
> -#define get_vlan_id(pvlan)				\
> -	((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
> -#define get_vlan_priority(pvlan)			\
> -	((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
> -#define get_vlan_encap_proto(pvlan)			\
> -	 (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
> -
> -#endif	/* _LINUX_IF_ETHER_H */
> diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> index 60e0eea7ad84..d35e92c17a5e 100644
> --- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
> +++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> @@ -5,7 +5,6 @@
>   
>   #include "../include/osdep_service.h"
>   #include "../include/drv_types.h"
> -#include "../include/if_ether.h"
>   #include "../include/ip.h"
>   #include "../include/wifi.h"
>   #include "../include/mlme_osdep.h"
> 

This patch is outdated now.

regards,
Michael

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-08-23 23:52 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-22 16:44 [PATCH] staging: r8188eu: remove if_ether.h header file Michael Straube
2021-08-23 22:16 ` Phillip Potter
2021-08-23 23:51 ` Michael Straube

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).