[PATCH AUTOSEL 5.4 19/50] media: imx: imx7_mipi_csis: Fix logging of only error event counters

[PATCH AUTOSEL 5.4 19/50] media: imx: imx7_mipi_csis: Fix logging of only error event counters

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d2fcc9c2de1191ea80366e3658711753738dd10a ]

The mipi_csis_events array ends with 6 non-error events, not 4. Update
mipi_csis_log_counters() accordingly. While at it, log event counters in
forward order, as there's no reason to log them backward.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 021bbd420390..63bc78e4cac8 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -528,13 +528,15 @@ static void mipi_csis_clear_counters(struct csi_state *state)
 
 static void mipi_csis_log_counters(struct csi_state *state, bool non_errors)
 {
-	int i = non_errors ? MIPI_CSIS_NUM_EVENTS : MIPI_CSIS_NUM_EVENTS - 4;
+	unsigned int num_events = non_errors ? MIPI_CSIS_NUM_EVENTS
+				: MIPI_CSIS_NUM_EVENTS - 6;
 	struct device *dev = &state->pdev->dev;
 	unsigned long flags;
+	unsigned int i;
 
 	spin_lock_irqsave(&state->slock, flags);
 
-	for (i--; i >= 0; i--) {
+	for (i = 0; i < num_events; ++i) {
 		if (state->events[i].counter > 0 || state->debug)
 			dev_info(dev, "%s events: %d\n", state->events[i].name,
 				 state->events[i].counter);
-- 
2.30.2

[PATCH AUTOSEL 5.4 35/50] media: imx-csi: Skip first few frames from a BT.656 source

[Sasha Levin]

From: Steve Longerbeam <slongerbeam@gmail.com>

[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]

Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.

[fabio: fixed checkpatch warning and increased the frame skipping to 20]

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csi.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 367e39f5b382..40b7e60f4a47 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -753,9 +753,10 @@ static int csi_setup(struct csi_priv *priv)
 
 static int csi_start(struct csi_priv *priv)
 {
-	struct v4l2_fract *output_fi;
+	struct v4l2_fract *input_fi, *output_fi;
 	int ret;
 
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
 	output_fi = &priv->frame_interval[priv->active_output_pad];
 
 	/* start upstream */
@@ -764,6 +765,17 @@ static int csi_start(struct csi_priv *priv)
 	if (ret)
 		return ret;
 
+	/* Skip first few frames from a BT.656 source */
+	if (priv->upstream_ep.bus_type == V4L2_MBUS_BT656) {
+		u32 delay_usec, bad_frames = 20;
+
+		delay_usec = DIV_ROUND_UP_ULL((u64)USEC_PER_SEC *
+			input_fi->numerator * bad_frames,
+			input_fi->denominator);
+
+		usleep_range(delay_usec, delay_usec + 1000);
+	}
+
 	if (priv->dest == IPU_CSI_DEST_IDMAC) {
 		ret = csi_idmac_start(priv);
 		if (ret)
-- 
2.30.2