linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 0/3] media: imx: add support for imx8mq MIPI RX
@ 2021-06-18  9:57 Martin Kepplinger
  2021-06-18  9:57 ` [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Martin Kepplinger @ 2021-06-18  9:57 UTC (permalink / raw)
  To: martin.kepplinger, laurent.pinchart, m.felsch, robh
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, mchehab,
	phone-devel, shawnguo, slongerbeam

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 173 ++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 963 ++++++++++++++++++
 4 files changed, 1241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-06-18  9:57 [PATCH v5 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
@ 2021-06-18  9:57 ` Martin Kepplinger
  2021-07-12 19:11   ` Rob Herring
  2021-06-18  9:57 ` [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
  2021-06-18  9:57 ` [PATCH v5 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
  2 siblings, 1 reply; 8+ messages in thread
From: Martin Kepplinger @ 2021-06-18  9:57 UTC (permalink / raw)
  To: martin.kepplinger, laurent.pinchart, m.felsch, robh
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, mchehab,
	phone-devel, shawnguo, slongerbeam

The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 173 ++++++++++++++++++
 1 file changed, 173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..97222485f223
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset containing
+                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+          maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.30.2


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-06-18  9:57 [PATCH v5 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
  2021-06-18  9:57 ` [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
@ 2021-06-18  9:57 ` Martin Kepplinger
  2021-07-12 21:52   ` Laurent Pinchart
  2021-06-18  9:57 ` [PATCH v5 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
  2 siblings, 1 reply; 8+ messages in thread
From: Martin Kepplinger @ 2021-06-18  9:57 UTC (permalink / raw)
  To: martin.kepplinger, laurent.pinchart, m.felsch, robh
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, mchehab,
	phone-devel, shawnguo, slongerbeam

Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware side
is based on
https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0

It's built as part of VIDEO_IMX7_CSI because that's documented to support
i.MX8M platforms. This driver adds i.MX8MQ support where currently only the
i.MX8MM platform has been supported.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 drivers/staging/media/imx/Makefile           |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c | 963 +++++++++++++++++++
 2 files changed, 964 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 6ac33275cc97..19c2fc54d424 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
 
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
+obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
new file mode 100644
index 000000000000..0f101ac67cd6
--- /dev/null
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -0,0 +1,963 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale i.MX8MQ SoC series MIPI-CSI2 receiver driver
+ *
+ * Copyright (C) 2021 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+#include <linux/interconnect.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#define MIPI_CSI2_DRIVER_NAME			"imx8mq-mipi-csi2"
+#define MIPI_CSI2_SUBDEV_NAME			MIPI_CSI2_DRIVER_NAME
+
+#define MIPI_CSI2_PAD_SINK			0
+#define MIPI_CSI2_PAD_SOURCE			1
+#define MIPI_CSI2_PADS_NUM			2
+
+#define MIPI_CSI2_DEF_PIX_WIDTH			640
+#define MIPI_CSI2_DEF_PIX_HEIGHT		480
+
+/* Register map definition */
+
+/* i.MX8MQ CSI-2 controller CSR */
+#define CSI2RX_CFG_NUM_LANES			0x100
+#define CSI2RX_CFG_DISABLE_DATA_LANES		0x104
+#define CSI2RX_BIT_ERR				0x108
+#define CSI2RX_IRQ_STATUS			0x10C
+#define CSI2RX_IRQ_MASK				0x110
+#define CSI2RX_IRQ_MASK_ALL			0x1ff
+#define CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE	0x8
+#define CSI2RX_ULPS_STATUS			0x114
+#define CSI2RX_PPI_ERRSOT_HS			0x118
+#define CSI2RX_PPI_ERRSOTSYNC_HS		0x11C
+#define CSI2RX_PPI_ERRESC			0x120
+#define CSI2RX_PPI_ERRSYNCESC			0x124
+#define CSI2RX_PPI_ERRCONTROL			0x128
+#define CSI2RX_CFG_DISABLE_PAYLOAD_0		0x12C
+#define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
+
+enum {
+	ST_POWERED	= 1,
+	ST_STREAMING	= 2,
+	ST_SUSPENDED	= 4,
+};
+
+static const char * const imx8mq_mipi_csi_clk_id[] = {
+	"core",
+	"esc",
+	"ui",
+};
+
+#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
+#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
+#define	GPR_CSI2_1_HSEL			BIT(10)
+#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
+#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3F) << 2)
+
+struct csi_state {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk_bulk_data *clks;
+	struct reset_control *rst;
+	struct regulator *mipi_phy_regulator;
+	u8 index;
+
+	struct v4l2_subdev sd;
+	struct media_pad pads[MIPI_CSI2_PADS_NUM];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *src_sd;
+
+	struct v4l2_fwnode_bus_mipi_csi2 bus;
+	u32 hs_settle;
+	u32 clk_settle;
+
+	struct mutex lock;	/* Protect csi2_fmt, format_mbus and state */
+	const struct csi2_pix_format *csi2_fmt;
+	struct v4l2_mbus_framefmt format_mbus;
+	u32 state;
+
+	struct regmap *phy_gpr;
+	u8 phy_gpr_reg;
+
+	u32 send_level;
+
+	struct icc_path			*icc_path;
+	s32				icc_path_bw;
+};
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+struct csi2_pix_format {
+	u32 code;
+	u8 width;
+};
+
+static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
+	/* RAW (Bayer and greyscale) formats. */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_Y10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_Y12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.width = 14,
+	}, {
+	/* YUV formats */
+		.code = MEDIA_BUS_FMT_YUYV8_2X8,
+		.width = 16,
+	}, {
+		.code = MEDIA_BUS_FMT_YUYV8_1X16,
+		.width = 16,
+	}
+};
+
+static const struct csi2_pix_format *find_csi2_format(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_formats); i++)
+		if (code == imx8mq_mipi_csi_formats[i].code)
+			return &imx8mq_mipi_csi_formats[i];
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static inline void imx8mq_mipi_csi_write(struct csi_state *state, u32 reg, u32 val)
+{
+	writel(val, state->regs + reg);
+}
+
+static void imx8mq_mipi_csi_sw_reset(struct csi_state *state)
+{
+	int ret;
+
+	ret = reset_control_assert(state->rst);
+	if (ret < 0)
+		dev_err(state->dev, "Failed to assert resets: %d\n", ret);
+
+	msleep(20);
+}
+
+static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
+{
+	if (!on) {
+		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
+		return;
+	}
+
+	regmap_update_bits(state->phy_gpr,
+			   state->phy_gpr_reg,
+			   0x3FFF,
+			   GPR_CSI2_1_RX_ENABLE |
+			   GPR_CSI2_1_VID_INTFC_ENB |
+			   GPR_CSI2_1_HSEL |
+			   GPR_CSI2_1_CONT_CLK_MODE |
+			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
+}
+
+static void imx8mq_mipi_csi_set_params(struct csi_state *state)
+{
+	int lanes = state->bus.num_data_lanes;
+	u32 val = 0;
+	int i;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_NUM_LANES, lanes - 1);
+
+	for (i = 0; i < lanes; i++)
+		val |= (1 << i);
+
+	val = 0xF & ~val;
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, val);
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK, CSI2RX_IRQ_MASK_ALL);
+
+	imx8mq_mipi_csi_write(state, 0x180, 1);
+	/* vid_vc */
+	imx8mq_mipi_csi_write(state, 0x184, 1);
+	imx8mq_mipi_csi_write(state, 0x188, state->send_level);
+}
+
+static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
+{
+	return clk_bulk_prepare_enable(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				       state->clks);
+}
+
+static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
+{
+	clk_bulk_disable_unprepare(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				   state->clks);
+}
+
+static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
+{
+	unsigned int i;
+	int ret;
+
+	state->clks = devm_kcalloc(state->dev,
+				   ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				   sizeof(*state->clks), GFP_KERNEL);
+
+	if (!state->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_clk_id); i++)
+		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
+
+	ret = devm_clk_bulk_get(state->dev, ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
+				state->clks);
+	return ret;
+}
+
+static void imx8mq_mipi_csi_start_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_sw_reset(state);
+	imx8mq_mipi_csi_set_params(state);
+	imx8mq_mipi_csi_system_enable(state, true);
+}
+
+static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_system_enable(state, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static struct csi_state *mipi_sd_to_csi2_state(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_state, sd);
+}
+
+static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
+			      CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
+
+	if (enable) {
+		ret = pm_runtime_get_sync(state->dev);
+		if (ret < 0) {
+			pm_runtime_put_noidle(state->dev);
+			return ret;
+		}
+		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			goto done;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (enable) {
+		if (state->state & ST_SUSPENDED) {
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		imx8mq_mipi_csi_start_stream(state);
+		ret = v4l2_subdev_call(state->src_sd, video, s_stream, 1);
+		if (ret < 0)
+			goto unlock;
+
+		state->state |= ST_STREAMING;
+	} else {
+		v4l2_subdev_call(state->src_sd, video, s_stream, 0);
+		ret = v4l2_subdev_call(state->src_sd, core, s_power, 0);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+		imx8mq_mipi_csi_stop_stream(state);
+		state->state &= ~ST_STREAMING;
+	}
+
+unlock:
+	mutex_unlock(&state->lock);
+
+done:
+	if (!enable || ret < 0)
+		pm_runtime_put(state->dev);
+
+	return ret;
+}
+
+static struct v4l2_mbus_framefmt *
+imx8mq_mipi_csi_get_format(struct csi_state *state,
+			   struct v4l2_subdev_pad_config *cfg,
+			   enum v4l2_subdev_format_whence which,
+			   unsigned int pad)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(&state->sd, cfg, pad);
+
+	return &state->format_mbus;
+}
+
+static int imx8mq_mipi_csi_init_cfg(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_pad_config *cfg)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt_sink;
+	struct v4l2_mbus_framefmt *fmt_source;
+	enum v4l2_subdev_format_whence which;
+
+	which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt_sink = imx8mq_mipi_csi_get_format(state, cfg, which, MIPI_CSI2_PAD_SINK);
+
+	fmt_sink->code = MEDIA_BUS_FMT_SGBRG10_1X10;
+	fmt_sink->width = MIPI_CSI2_DEF_PIX_WIDTH;
+	fmt_sink->height = MIPI_CSI2_DEF_PIX_HEIGHT;
+	fmt_sink->field = V4L2_FIELD_NONE;
+
+	fmt_sink->colorspace = V4L2_COLORSPACE_RAW;
+	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
+					      fmt_sink->ycbcr_enc);
+
+	/*
+	 * When called from imx8mq_mipi_csi_subdev_init() to initialize the
+	 * active configuration, cfg is NULL, which indicates there's no source
+	 * pad configuration to set.
+	 */
+	if (!cfg)
+		return 0;
+
+	fmt_source = imx8mq_mipi_csi_get_format(state, cfg, which,
+						MIPI_CSI2_PAD_SOURCE);
+	*fmt_source = *fmt_sink;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_get_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	sdformat->format = *fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+					  struct v4l2_subdev_pad_config *cfg,
+					  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/*
+	 * We can't transcode in any way, the source format is identical
+	 * to the sink format.
+	 */
+	if (code->pad == MIPI_CSI2_PAD_SOURCE) {
+		struct v4l2_mbus_framefmt *fmt;
+
+		if (code->index > 0)
+			return -EINVAL;
+
+		fmt = imx8mq_mipi_csi_get_format(state, cfg, code->which,
+						 code->pad);
+		code->code = fmt->code;
+		return 0;
+	}
+
+	if (code->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	if (code->index >= ARRAY_SIZE(imx8mq_mipi_csi_formats))
+		return -EINVAL;
+
+	code->code = imx8mq_mipi_csi_formats[code->index].code;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_pad_config *cfg,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct csi2_pix_format const *csi2_fmt;
+	struct v4l2_mbus_framefmt *fmt;
+
+	/*
+	 * The device can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == MIPI_CSI2_PAD_SOURCE)
+		return imx8mq_mipi_csi_get_fmt(sd, cfg, sdformat);
+
+	if (sdformat->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	csi2_fmt = find_csi2_format(sdformat->format.code);
+	if (!csi2_fmt) {
+		dev_err(state->dev, "no format found based on code %d\n",
+			sdformat->format.code);
+		csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	}
+
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	fmt->code = csi2_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	sdformat->format = *fmt;
+
+	/* Propagate the format from sink to source. */
+	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
+					 MIPI_CSI2_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSI2 format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csi2_fmt = csi2_fmt;
+
+	mutex_unlock(&state->lock);
+
+	/* https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764275/highlight/true#M118744 */
+	if (sdformat->format.width * sdformat->format.height > 720 * 480)
+		state->hs_settle = 0x9;
+	else
+		state->hs_settle = 0x14;
+
+	state->send_level = 64;
+
+	dev_dbg(state->dev,
+		"%s: format %dx%d send_level %d hs_settle 0x%X\n", __func__,
+		sdformat->format.width, sdformat->format.height,
+		state->send_level, state->hs_settle);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx8mq_mipi_csi_video_ops = {
+	.s_stream	= imx8mq_mipi_csi_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx8mq_mipi_csi_pad_ops = {
+	.init_cfg		= imx8mq_mipi_csi_init_cfg,
+	.enum_mbus_code		= imx8mq_mipi_csi_enum_mbus_code,
+	.get_fmt		= imx8mq_mipi_csi_get_fmt,
+	.set_fmt		= imx8mq_mipi_csi_set_fmt,
+};
+
+static const struct v4l2_subdev_ops imx8mq_mipi_csi_subdev_ops = {
+	.video	= &imx8mq_mipi_csi_video_ops,
+	.pad	= &imx8mq_mipi_csi_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+static int imx8mq_mipi_csi_link_setup(struct media_entity *entity,
+				      const struct media_pad *local_pad,
+				      const struct media_pad *remote_pad,
+				      u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_subdev *remote_sd;
+
+	/* We only care about the link to the source. */
+	if (!(local_pad->flags & MEDIA_PAD_FL_SINK))
+		return 0;
+
+	remote_sd = media_entity_to_v4l2_subdev(remote_pad->entity);
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		if (state->src_sd)
+			return -EBUSY;
+
+		state->src_sd = remote_sd;
+	} else {
+		state->src_sd = NULL;
+	}
+
+	return 0;
+}
+
+static const struct media_entity_operations imx8mq_mipi_csi_entity_ops = {
+	.link_setup	= imx8mq_mipi_csi_link_setup,
+	.link_validate	= v4l2_subdev_link_validate,
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async subdev notifier
+ */
+
+static struct csi_state *
+mipi_notifier_to_csi2_state(struct v4l2_async_notifier *n)
+{
+	return container_of(n, struct csi_state, notifier);
+}
+
+static int imx8mq_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+					struct v4l2_subdev *sd,
+					struct v4l2_async_subdev *asd)
+{
+	struct csi_state *state = mipi_notifier_to_csi2_state(notifier);
+	struct media_pad *sink = &state->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, 0);
+}
+
+static const struct v4l2_async_notifier_operations imx8mq_mipi_csi_notify_ops = {
+	.bound = imx8mq_mipi_csi_notify_bound,
+};
+
+static int imx8mq_mipi_csi_async_register(struct csi_state *state)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_subdev *asd;
+	struct fwnode_handle *ep;
+	unsigned int i;
+	int ret;
+
+	v4l2_async_notifier_init(&state->notifier);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
+					     FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -ENOTCONN;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		goto err_parse;
+
+	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
+		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
+			dev_err(state->dev,
+				"data lanes reordering is not supported");
+			ret = -EINVAL;
+			goto err_parse;
+		}
+	}
+
+	state->bus = vep.bus.mipi_csi2;
+
+	dev_dbg(state->dev, "data lanes: %d flags: 0x%08X\n",
+		state->bus.num_data_lanes,
+		state->bus.flags);
+
+	asd = v4l2_async_notifier_add_fwnode_remote_subdev(&state->notifier,
+							   ep, struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		goto err_parse;
+	}
+
+	fwnode_handle_put(ep);
+
+	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
+
+	ret = v4l2_async_subdev_notifier_register(&state->sd, &state->notifier);
+	if (ret)
+		return ret;
+
+	return v4l2_async_register_subdev(&state->sd);
+
+err_parse:
+	fwnode_handle_put(ep);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	mutex_lock(&state->lock);
+
+	if (state->state & ST_POWERED) {
+		imx8mq_mipi_csi_stop_stream(state);
+		imx8mq_mipi_csi_clk_disable(state);
+		state->state &= ~ST_POWERED;
+		if (!runtime)
+			state->state |= ST_SUSPENDED;
+	}
+
+	mutex_unlock(&state->lock);
+
+	ret = icc_set_bw(state->icc_path, 0, 0);
+	if (ret)
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
+	if (ret) {
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (!runtime && !(state->state & ST_SUSPENDED))
+		goto unlock;
+
+	if (!(state->state & ST_POWERED)) {
+		state->state |= ST_POWERED;
+		ret = imx8mq_mipi_csi_clk_enable(state);
+	}
+	if (state->state & ST_STREAMING)
+		imx8mq_mipi_csi_start_stream(state);
+
+	state->state &= ~ST_SUSPENDED;
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int __maybe_unused imx8mq_mipi_csi_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, true);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, true);
+}
+
+static const struct dev_pm_ops imx8mq_mipi_csi_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx8mq_mipi_csi_runtime_suspend,
+			   imx8mq_mipi_csi_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(imx8mq_mipi_csi_suspend, imx8mq_mipi_csi_resume)
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe/remove & platform driver
+ */
+
+static int imx8mq_mipi_csi_subdev_init(struct csi_state *state)
+{
+	struct v4l2_subdev *sd = &state->sd;
+
+	v4l2_subdev_init(sd, &imx8mq_mipi_csi_subdev_ops);
+	sd->owner = THIS_MODULE;
+	snprintf(sd->name, sizeof(sd->name), "%s.%d",
+		 MIPI_CSI2_SUBDEV_NAME, state->index);
+
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sd->ctrl_handler = NULL;
+
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &imx8mq_mipi_csi_entity_ops;
+
+	sd->dev = state->dev;
+
+	state->csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	imx8mq_mipi_csi_init_cfg(sd, NULL);
+
+	state->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
+					 | MEDIA_PAD_FL_MUST_CONNECT;
+	state->pads[MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE
+					   | MEDIA_PAD_FL_MUST_CONNECT;
+	return media_entity_pads_init(&sd->entity, MIPI_CSI2_PADS_NUM,
+				      state->pads);
+}
+
+static void imx8mq_mipi_csi_release_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	icc_put(state->icc_path);
+}
+
+static int imx8mq_mipi_csi_init_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/* Optional interconnect request */
+	state->icc_path = of_icc_get(&pdev->dev, "dram");
+	if (IS_ERR_OR_NULL(state->icc_path))
+		return PTR_ERR_OR_ZERO(state->icc_path);
+
+	state->icc_path_bw = MBps_to_icc(700);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
+{
+	struct device *dev = state->dev;
+	struct device_node *np = state->dev->of_node;
+	struct device_node *node;
+	phandle ph;
+	u32 out_val[2];
+	int ret = 0;
+
+	state->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(state->rst)) {
+		dev_err(dev, "Failed to get reset: %pe\n", state->rst);
+		return PTR_ERR(state->rst);
+	}
+
+	ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_err(dev, "no fsl,mipi-phy-gpr property found: %d\n", ret);
+		return ret;
+	}
+
+	ph = *out_val;
+
+	node = of_find_node_by_phandle(ph);
+	if (!node) {
+		ret = -ENODEV;
+		dev_err(dev, "Error finding node by phandle\n");
+		goto out;
+	}
+	state->phy_gpr = syscon_node_to_regmap(node);
+	if (IS_ERR(state->phy_gpr)) {
+		ret = PTR_ERR(state->phy_gpr);
+		dev_err(dev, "failed to get gpr regmap: %pe\n", state->phy_gpr);
+		goto out;
+	}
+
+	state->phy_gpr_reg = out_val[1];
+	dev_dbg(dev, "phy gpr register set to 0x%X\n", state->phy_gpr_reg);
+
+out:
+	of_node_put(node);
+	return ret;
+}
+
+static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi_state *state;
+	int ret;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	mutex_init(&state->lock);
+
+	state->dev = dev;
+
+	ret = imx8mq_mipi_csi_parse_dt(state);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse device tree: %d\n", ret);
+		return ret;
+	}
+
+	/* Acquire resources. */
+	state->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	ret = imx8mq_mipi_csi_clk_get(state);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize and register the subdev. */
+	ret = imx8mq_mipi_csi_subdev_init(state);
+	if (ret < 0)
+		goto disable_clock;
+
+	platform_set_drvdata(pdev, &state->sd);
+
+	ret = imx8mq_mipi_csi_async_register(state);
+	if (ret < 0) {
+		dev_err(dev, "async register failed: %d\n", ret);
+		goto cleanup;
+	}
+
+	ret = imx8mq_mipi_csi_init_icc(pdev);
+	if (ret)
+		goto cleanup;
+
+	/* Enable runtime PM. */
+	pm_runtime_enable(dev);
+	if (!pm_runtime_enabled(dev)) {
+		ret = imx8mq_mipi_csi_pm_resume(dev, true);
+		if (ret < 0) {
+			imx8mq_mipi_csi_release_icc(pdev);
+			goto cleanup;
+		}
+	}
+
+	return 0;
+
+cleanup:
+	media_entity_cleanup(&state->sd.entity);
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+disable_clock:
+	imx8mq_mipi_csi_clk_disable(state);
+	mutex_destroy(&state->lock);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+	imx8mq_mipi_csi_clk_disable(state);
+	media_entity_cleanup(&state->sd.entity);
+	mutex_destroy(&state->lock);
+	pm_runtime_set_suspended(&pdev->dev);
+	imx8mq_mipi_csi_release_icc(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-csi2",},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
+
+static struct platform_driver imx8mq_mipi_csi_driver = {
+	.probe		= imx8mq_mipi_csi_probe,
+	.remove		= imx8mq_mipi_csi_remove,
+	.driver		= {
+		.of_match_table = imx8mq_mipi_csi_of_match,
+		.name		= MIPI_CSI2_DRIVER_NAME,
+		.pm		= &imx8mq_mipi_csi_pm_ops,
+	},
+};
+
+module_platform_driver(imx8mq_mipi_csi_driver);
+
+MODULE_DESCRIPTION("i.MX8MQ MIPI CSI-2 receiver driver");
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@puri.sm>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx8mq-mipi-csi2");
-- 
2.30.2


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
  2021-06-18  9:57 [PATCH v5 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
  2021-06-18  9:57 ` [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
  2021-06-18  9:57 ` [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
@ 2021-06-18  9:57 ` Martin Kepplinger
  2 siblings, 0 replies; 8+ messages in thread
From: Martin Kepplinger @ 2021-06-18  9:57 UTC (permalink / raw)
  To: martin.kepplinger, laurent.pinchart, m.felsch, robh
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, mchehab,
	phone-devel, shawnguo, slongerbeam

Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2
receiver (new driver) and the CSI Bridge that provides the user buffers
(existing driver).

An image sensor is to be connected to the MIPIs' second port, to be described
in board files.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 91df9c5350ae..e026a39bddce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1099,6 +1099,110 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
 			mu: mailbox@30aa0000 {
 				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
 				reg = <0x30aa0000 0x10000>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-06-18  9:57 ` [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
@ 2021-07-12 19:11   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-07-12 19:11 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: festevam, kernel, devicetree, linux-media, phone-devel, kernel,
	laurent.pinchart, linux-kernel, linux-staging, shawnguo,
	linux-imx, linux-arm-kernel, mchehab, slongerbeam, krzk,
	m.felsch

On Fri, 18 Jun 2021 11:57:51 +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 173 ++++++++++++++++++
>  1 file changed, 173 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-06-18  9:57 ` [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
@ 2021-07-12 21:52   ` Laurent Pinchart
  2021-07-14  6:41     ` Martin Kepplinger
  0 siblings, 1 reply; 8+ messages in thread
From: Laurent Pinchart @ 2021-07-12 21:52 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: m.felsch, robh, devicetree, festevam, kernel, kernel, krzk,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, mchehab, phone-devel, shawnguo, slongerbeam

Hi Martin,

Thank you for the patch.

On Fri, Jun 18, 2021 at 11:57:52AM +0200, Martin Kepplinger wrote:
> Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware side
> is based on
> https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0
> 
> It's built as part of VIDEO_IMX7_CSI because that's documented to support
> i.MX8M platforms. This driver adds i.MX8MQ support where currently only the
> i.MX8MM platform has been supported.

Overall this is really nice work. I have quite a few review comments,
but hopefully nothing that should be difficult to handle.

> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  drivers/staging/media/imx/Makefile           |   1 +
>  drivers/staging/media/imx/imx8mq-mipi-csi2.c | 963 +++++++++++++++++++
>  2 files changed, 964 insertions(+)
>  create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c
> 
> diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
> index 6ac33275cc97..19c2fc54d424 100644
> --- a/drivers/staging/media/imx/Makefile
> +++ b/drivers/staging/media/imx/Makefile
> @@ -16,3 +16,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
>  
>  obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
>  obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
> +obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
> diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
> new file mode 100644
> index 000000000000..0f101ac67cd6
> --- /dev/null
> +++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
> @@ -0,0 +1,963 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Freescale i.MX8MQ SoC series MIPI-CSI2 receiver driver
> + *
> + * Copyright (C) 2021 Purism SPC
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>

This should go before module.h.

> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/spinlock.h>
> +#include <linux/interconnect.h>

Abd this before interrupt.h.

> +
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define MIPI_CSI2_DRIVER_NAME			"imx8mq-mipi-csi2"
> +#define MIPI_CSI2_SUBDEV_NAME			MIPI_CSI2_DRIVER_NAME
> +
> +#define MIPI_CSI2_PAD_SINK			0
> +#define MIPI_CSI2_PAD_SOURCE			1
> +#define MIPI_CSI2_PADS_NUM			2
> +
> +#define MIPI_CSI2_DEF_PIX_WIDTH			640
> +#define MIPI_CSI2_DEF_PIX_HEIGHT		480
> +
> +/* Register map definition */
> +
> +/* i.MX8MQ CSI-2 controller CSR */
> +#define CSI2RX_CFG_NUM_LANES			0x100
> +#define CSI2RX_CFG_DISABLE_DATA_LANES		0x104
> +#define CSI2RX_BIT_ERR				0x108
> +#define CSI2RX_IRQ_STATUS			0x10C

Could you please use lowercase hex constants through the driver ?

> +#define CSI2RX_IRQ_MASK				0x110
> +#define CSI2RX_IRQ_MASK_ALL			0x1ff
> +#define CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE	0x8
> +#define CSI2RX_ULPS_STATUS			0x114
> +#define CSI2RX_PPI_ERRSOT_HS			0x118
> +#define CSI2RX_PPI_ERRSOTSYNC_HS		0x11C
> +#define CSI2RX_PPI_ERRESC			0x120
> +#define CSI2RX_PPI_ERRSYNCESC			0x124
> +#define CSI2RX_PPI_ERRCONTROL			0x128
> +#define CSI2RX_CFG_DISABLE_PAYLOAD_0		0x12C
> +#define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
> +
> +enum {
> +	ST_POWERED	= 1,
> +	ST_STREAMING	= 2,
> +	ST_SUSPENDED	= 4,
> +};
> +
> +static const char * const imx8mq_mipi_csi_clk_id[] = {
> +	"core",
> +	"esc",
> +	"ui",
> +};
> +
> +#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
> +#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
> +#define	GPR_CSI2_1_HSEL			BIT(10)
> +#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
> +#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3F) << 2)
> +
> +struct csi_state {
> +	struct device *dev;
> +	void __iomem *regs;
> +	struct clk_bulk_data *clks;

You could declare this as an array to avoid dynamic allocation.

	struct clk_bulk_data *clks[CSI_NUM_CLKS];

with CSI_NUM_CLKS defined as

#define CSI_NUM_CLKS	ARRAY_SIZE(imx8mq_mipi_csi_clk_id)

just after imx8mq_mipi_csi_clk_id.

> +	struct reset_control *rst;
> +	struct regulator *mipi_phy_regulator;
> +	u8 index;

This is never set and used in a single location. I'd drop it.

> +
> +	struct v4l2_subdev sd;
> +	struct media_pad pads[MIPI_CSI2_PADS_NUM];
> +	struct v4l2_async_notifier notifier;
> +	struct v4l2_subdev *src_sd;
> +
> +	struct v4l2_fwnode_bus_mipi_csi2 bus;
> +	u32 hs_settle;
> +	u32 clk_settle;
> +
> +	struct mutex lock;	/* Protect csi2_fmt, format_mbus and state */
> +	const struct csi2_pix_format *csi2_fmt;
> +	struct v4l2_mbus_framefmt format_mbus;
> +	u32 state;
> +
> +	struct regmap *phy_gpr;
> +	u8 phy_gpr_reg;
> +
> +	u32 send_level;

While the other fields are relatively self-explicit, I'm not sure what
this is. A comment wouldn't hurt. As the value is set to 64 and never
modified, you could also define a corresponding macro and drop the
field.

> +
> +	struct icc_path			*icc_path;
> +	s32				icc_path_bw;
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Format helpers
> + */
> +
> +struct csi2_pix_format {
> +	u32 code;
> +	u8 width;
> +};
> +
> +static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
> +	/* RAW (Bayer and greyscale) formats. */
> +	{
> +		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
> +		.width = 8,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
> +		.width = 8,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
> +		.width = 8,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
> +		.width = 8,
> +	}, {
> +		.code = MEDIA_BUS_FMT_Y8_1X8,
> +		.width = 8,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
> +		.width = 10,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
> +		.width = 10,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
> +		.width = 10,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
> +		.width = 10,
> +	}, {
> +		.code = MEDIA_BUS_FMT_Y10_1X10,
> +		.width = 10,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
> +		.width = 12,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
> +		.width = 12,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
> +		.width = 12,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
> +		.width = 12,
> +	}, {
> +		.code = MEDIA_BUS_FMT_Y12_1X12,
> +		.width = 12,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
> +		.width = 14,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
> +		.width = 14,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
> +		.width = 14,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
> +		.width = 14,
> +	}, {
> +	/* YUV formats */
> +		.code = MEDIA_BUS_FMT_YUYV8_2X8,
> +		.width = 16,
> +	}, {
> +		.code = MEDIA_BUS_FMT_YUYV8_1X16,
> +		.width = 16,
> +	}
> +};
> +
> +static const struct csi2_pix_format *find_csi2_format(u32 code)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_formats); i++)
> +		if (code == imx8mq_mipi_csi_formats[i].code)
> +			return &imx8mq_mipi_csi_formats[i];
> +	return NULL;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware configuration
> + */
> +
> +static inline void imx8mq_mipi_csi_write(struct csi_state *state, u32 reg, u32 val)
> +{
> +	writel(val, state->regs + reg);
> +}
> +
> +static void imx8mq_mipi_csi_sw_reset(struct csi_state *state)
> +{
> +	int ret;
> +
> +	ret = reset_control_assert(state->rst);
> +	if (ret < 0)
> +		dev_err(state->dev, "Failed to assert resets: %d\n", ret);

Should you return an error here (and handle it in the caller) ?

> +
> +	msleep(20);

That's fairly long, is it a documented daily ? If not, have you tested
operation without it ?

> +}
> +
> +static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
> +{
> +	if (!on) {
> +		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
> +		return;
> +	}
> +
> +	regmap_update_bits(state->phy_gpr,
> +			   state->phy_gpr_reg,
> +			   0x3FFF,
> +			   GPR_CSI2_1_RX_ENABLE |
> +			   GPR_CSI2_1_VID_INTFC_ENB |
> +			   GPR_CSI2_1_HSEL |
> +			   GPR_CSI2_1_CONT_CLK_MODE |
> +			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
> +}
> +
> +static void imx8mq_mipi_csi_set_params(struct csi_state *state)
> +{
> +	int lanes = state->bus.num_data_lanes;
> +	u32 val = 0;
> +	int i;
> +
> +	imx8mq_mipi_csi_write(state, CSI2RX_CFG_NUM_LANES, lanes - 1);
> +
> +	for (i = 0; i < lanes; i++)
> +		val |= (1 << i);
> +
> +	val = 0xF & ~val;
> +	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, val);

You could also write

	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES,
			      (0xf << lanes) & 0xf);

> +
> +	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK, CSI2RX_IRQ_MASK_ALL);
> +
> +	imx8mq_mipi_csi_write(state, 0x180, 1);
> +	/* vid_vc */
> +	imx8mq_mipi_csi_write(state, 0x184, 1);
> +	imx8mq_mipi_csi_write(state, 0x188, state->send_level);

Register 0x188 is documented, so a macro would be nice.

> +}
> +
> +static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
> +{
> +	return clk_bulk_prepare_enable(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
> +				       state->clks);

I'd use ARRAY_SIZE(state->clks) here and below where applicable (if you
agree with my proposal above to make clks an array).

> +}
> +
> +static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
> +{
> +	clk_bulk_disable_unprepare(ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
> +				   state->clks);
> +}
> +
> +static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	state->clks = devm_kcalloc(state->dev,
> +				   ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
> +				   sizeof(*state->clks), GFP_KERNEL);
> +
> +	if (!state->clks)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_clk_id); i++)
> +		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
> +
> +	ret = devm_clk_bulk_get(state->dev, ARRAY_SIZE(imx8mq_mipi_csi_clk_id),
> +				state->clks);
> +	return ret;

	return devm_clk_bulk_get(state->dev, ARRAY_SIZE(state->clks),
				 state->clks);

> +}
> +
> +static void imx8mq_mipi_csi_start_stream(struct csi_state *state)
> +{
> +	imx8mq_mipi_csi_sw_reset(state);
> +	imx8mq_mipi_csi_set_params(state);
> +	imx8mq_mipi_csi_system_enable(state, true);
> +}
> +
> +static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
> +{
> +	imx8mq_mipi_csi_system_enable(state, false);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 subdev operations
> + */
> +
> +static struct csi_state *mipi_sd_to_csi2_state(struct v4l2_subdev *sdev)
> +{
> +	return container_of(sdev, struct csi_state, sd);
> +}
> +
> +static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	int ret;
> +
> +	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
> +			      CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
> +
> +	if (enable) {
> +		ret = pm_runtime_get_sync(state->dev);
> +		if (ret < 0) {
> +			pm_runtime_put_noidle(state->dev);
> +			return ret;
> +		}
> +		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
> +		if (ret < 0 && ret != -ENOIOCTLCMD)
> +			goto done;

.s_power() is deprecated for sensors, so I would drop this.

> +	}
> +
> +	mutex_lock(&state->lock);
> +
> +	if (enable) {
> +		if (state->state & ST_SUSPENDED) {
> +			ret = -EBUSY;
> +			goto unlock;
> +		}
> +
> +		imx8mq_mipi_csi_start_stream(state);
> +		ret = v4l2_subdev_call(state->src_sd, video, s_stream, 1);
> +		if (ret < 0)
> +			goto unlock;
> +
> +		state->state |= ST_STREAMING;
> +	} else {
> +		v4l2_subdev_call(state->src_sd, video, s_stream, 0);
> +		ret = v4l2_subdev_call(state->src_sd, core, s_power, 0);

This sohuld be dropped too.

> +		if (ret == -ENOIOCTLCMD)
> +			ret = 0;
> +		imx8mq_mipi_csi_stop_stream(state);
> +		state->state &= ~ST_STREAMING;
> +	}
> +
> +unlock:
> +	mutex_unlock(&state->lock);
> +
> +done:
> +	if (!enable || ret < 0)
> +		pm_runtime_put(state->dev);
> +
> +	return ret;
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +imx8mq_mipi_csi_get_format(struct csi_state *state,
> +			   struct v4l2_subdev_pad_config *cfg,
> +			   enum v4l2_subdev_format_whence which,
> +			   unsigned int pad)
> +{
> +	if (which == V4L2_SUBDEV_FORMAT_TRY)
> +		return v4l2_subdev_get_try_format(&state->sd, cfg, pad);
> +
> +	return &state->format_mbus;
> +}
> +
> +static int imx8mq_mipi_csi_init_cfg(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_pad_config *cfg)
> +{
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	struct v4l2_mbus_framefmt *fmt_sink;
> +	struct v4l2_mbus_framefmt *fmt_source;
> +	enum v4l2_subdev_format_whence which;
> +
> +	which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt_sink = imx8mq_mipi_csi_get_format(state, cfg, which, MIPI_CSI2_PAD_SINK);
> +
> +	fmt_sink->code = MEDIA_BUS_FMT_SGBRG10_1X10;
> +	fmt_sink->width = MIPI_CSI2_DEF_PIX_WIDTH;
> +	fmt_sink->height = MIPI_CSI2_DEF_PIX_HEIGHT;
> +	fmt_sink->field = V4L2_FIELD_NONE;
> +
> +	fmt_sink->colorspace = V4L2_COLORSPACE_RAW;
> +	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
> +	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
> +	fmt_sink->quantization =
> +		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
> +					      fmt_sink->ycbcr_enc);
> +
> +	/*
> +	 * When called from imx8mq_mipi_csi_subdev_init() to initialize the
> +	 * active configuration, cfg is NULL, which indicates there's no source
> +	 * pad configuration to set.
> +	 */
> +	if (!cfg)
> +		return 0;
> +
> +	fmt_source = imx8mq_mipi_csi_get_format(state, cfg, which,
> +						MIPI_CSI2_PAD_SOURCE);

When which == V4L2_SUBDEV_FORMAT_ACTIVE, imx8mq_mipi_csi_get_format()
will return &state->format_mbus for both the sink and the source. To
avoid corner cases and handling of special behaviours, I would recommend
turning state->format_mbus into an array of two elements, one for the
sink and one for the source. The little bit of extra memory used for the
redundant information is I think a fair price for making the format
handling code easier to read and follow.

This will also prepare for ongoing work in the V4L2 subdev core that
will store per-pad v4l2_mbus_framefmt in the v4l2_subdev structure,
simplifying drivers.

> +	*fmt_source = *fmt_sink;
> +
> +	return 0;
> +}
> +
> +static int imx8mq_mipi_csi_get_fmt(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg,
> +				   struct v4l2_subdev_format *sdformat)
> +{
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	struct v4l2_mbus_framefmt *fmt;
> +
> +	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
> +					 sdformat->pad);
> +
> +	mutex_lock(&state->lock);
> +
> +	sdformat->format = *fmt;
> +
> +	mutex_unlock(&state->lock);
> +
> +	return 0;
> +}
> +
> +static int imx8mq_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
> +					  struct v4l2_subdev_pad_config *cfg,
> +					  struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +
> +	/*
> +	 * We can't transcode in any way, the source format is identical
> +	 * to the sink format.
> +	 */
> +	if (code->pad == MIPI_CSI2_PAD_SOURCE) {
> +		struct v4l2_mbus_framefmt *fmt;
> +
> +		if (code->index > 0)
> +			return -EINVAL;
> +
> +		fmt = imx8mq_mipi_csi_get_format(state, cfg, code->which,
> +						 code->pad);
> +		code->code = fmt->code;
> +		return 0;
> +	}
> +
> +	if (code->pad != MIPI_CSI2_PAD_SINK)
> +		return -EINVAL;
> +
> +	if (code->index >= ARRAY_SIZE(imx8mq_mipi_csi_formats))
> +		return -EINVAL;
> +
> +	code->code = imx8mq_mipi_csi_formats[code->index].code;
> +
> +	return 0;
> +}
> +
> +static int imx8mq_mipi_csi_set_fmt(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg,
> +				   struct v4l2_subdev_format *sdformat)
> +{
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	struct csi2_pix_format const *csi2_fmt;
> +	struct v4l2_mbus_framefmt *fmt;
> +
> +	/*
> +	 * The device can't transcode in any way, the source format can't be
> +	 * modified.
> +	 */
> +	if (sdformat->pad == MIPI_CSI2_PAD_SOURCE)
> +		return imx8mq_mipi_csi_get_fmt(sd, cfg, sdformat);
> +
> +	if (sdformat->pad != MIPI_CSI2_PAD_SINK)
> +		return -EINVAL;
> +
> +	csi2_fmt = find_csi2_format(sdformat->format.code);
> +	if (!csi2_fmt) {
> +		dev_err(state->dev, "no format found based on code %d\n",
> +			sdformat->format.code);

This isn't an error, it can happen, no message is needed. Otherwise
userspace will have a way to flood the kernel log.

> +		csi2_fmt = &imx8mq_mipi_csi_formats[0];
> +	}
> +
> +	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
> +					 sdformat->pad);
> +
> +	mutex_lock(&state->lock);
> +
> +	fmt->code = csi2_fmt->code;
> +	fmt->width = sdformat->format.width;
> +	fmt->height = sdformat->format.height;
> +
> +	sdformat->format = *fmt;
> +
> +	/* Propagate the format from sink to source. */
> +	fmt = imx8mq_mipi_csi_get_format(state, cfg, sdformat->which,
> +					 MIPI_CSI2_PAD_SOURCE);
> +	*fmt = sdformat->format;
> +
> +	/* Store the CSI2 format descriptor for active formats. */
> +	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		state->csi2_fmt = csi2_fmt;
> +
> +	mutex_unlock(&state->lock);
> +
> +	/* https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764275/highlight/true#M118744 */
> +	if (sdformat->format.width * sdformat->format.height > 720 * 480)
> +		state->hs_settle = 0x9;
> +	else
> +		state->hs_settle = 0x14;

I don't think this is correct. The data rate referenced in table 35 is
the data rate per lane, equal to twice the link frequency. The link
frequency should be retrieved from the sensor, and the calculation be
done accordingly. Furthermore, this should be moved to stream start
time, as the sensor link frequency can vary until then.

> +
> +	state->send_level = 64;

Shouldn't this be covered by the mutex ?

> +
> +	dev_dbg(state->dev,
> +		"%s: format %dx%d send_level %d hs_settle 0x%X\n", __func__,

%u instead of %d for unsigned values, and Mu for hs_settle too as it's
%an integer value, not a bitfield.

> +		sdformat->format.width, sdformat->format.height,
> +		state->send_level, state->hs_settle);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops imx8mq_mipi_csi_video_ops = {
> +	.s_stream	= imx8mq_mipi_csi_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx8mq_mipi_csi_pad_ops = {
> +	.init_cfg		= imx8mq_mipi_csi_init_cfg,
> +	.enum_mbus_code		= imx8mq_mipi_csi_enum_mbus_code,
> +	.get_fmt		= imx8mq_mipi_csi_get_fmt,
> +	.set_fmt		= imx8mq_mipi_csi_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops imx8mq_mipi_csi_subdev_ops = {
> +	.video	= &imx8mq_mipi_csi_video_ops,
> +	.pad	= &imx8mq_mipi_csi_pad_ops,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media entity operations
> + */
> +
> +static int imx8mq_mipi_csi_link_setup(struct media_entity *entity,
> +				      const struct media_pad *local_pad,
> +				      const struct media_pad *remote_pad,
> +				      u32 flags)
> +{
> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	struct v4l2_subdev *remote_sd;
> +
> +	/* We only care about the link to the source. */
> +	if (!(local_pad->flags & MEDIA_PAD_FL_SINK))
> +		return 0;
> +
> +	remote_sd = media_entity_to_v4l2_subdev(remote_pad->entity);
> +
> +	if (flags & MEDIA_LNK_FL_ENABLED) {
> +		if (state->src_sd)
> +			return -EBUSY;
> +
> +		state->src_sd = remote_sd;
> +	} else {
> +		state->src_sd = NULL;
> +	}

As you support a single source subdev, I would make the link immutable,
and set src_sd in imx8mq_mipi_csi_notify_bound().

> +
> +	return 0;
> +}
> +
> +static const struct media_entity_operations imx8mq_mipi_csi_entity_ops = {
> +	.link_setup	= imx8mq_mipi_csi_link_setup,
> +	.link_validate	= v4l2_subdev_link_validate,
> +	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Async subdev notifier
> + */
> +
> +static struct csi_state *
> +mipi_notifier_to_csi2_state(struct v4l2_async_notifier *n)
> +{
> +	return container_of(n, struct csi_state, notifier);
> +}
> +
> +static int imx8mq_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
> +					struct v4l2_subdev *sd,
> +					struct v4l2_async_subdev *asd)
> +{
> +	struct csi_state *state = mipi_notifier_to_csi2_state(notifier);
> +	struct media_pad *sink = &state->sd.entity.pads[MIPI_CSI2_PAD_SINK];
> +
> +	return v4l2_create_fwnode_links_to_pad(sd, sink, 0);
> +}
> +
> +static const struct v4l2_async_notifier_operations imx8mq_mipi_csi_notify_ops = {
> +	.bound = imx8mq_mipi_csi_notify_bound,
> +};
> +
> +static int imx8mq_mipi_csi_async_register(struct csi_state *state)
> +{
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	struct v4l2_async_subdev *asd;
> +	struct fwnode_handle *ep;
> +	unsigned int i;
> +	int ret;
> +
> +	v4l2_async_notifier_init(&state->notifier);
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
> +					     FWNODE_GRAPH_ENDPOINT_NEXT);
> +	if (!ep)
> +		return -ENOTCONN;
> +
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	if (ret)
> +		goto err_parse;
> +
> +	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
> +		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
> +			dev_err(state->dev,
> +				"data lanes reordering is not supported");
> +			ret = -EINVAL;
> +			goto err_parse;
> +		}
> +	}
> +
> +	state->bus = vep.bus.mipi_csi2;
> +
> +	dev_dbg(state->dev, "data lanes: %d flags: 0x%08X\n",

s/X/x/

> +		state->bus.num_data_lanes,
> +		state->bus.flags);
> +
> +	asd = v4l2_async_notifier_add_fwnode_remote_subdev(&state->notifier,
> +							   ep, struct v4l2_async_subdev);
> +	if (IS_ERR(asd)) {
> +		ret = PTR_ERR(asd);
> +		goto err_parse;
> +	}
> +
> +	fwnode_handle_put(ep);
> +
> +	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
> +
> +	ret = v4l2_async_subdev_notifier_register(&state->sd, &state->notifier);
> +	if (ret)
> +		return ret;
> +
> +	return v4l2_async_register_subdev(&state->sd);
> +
> +err_parse:
> +	fwnode_handle_put(ep);
> +
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Suspend/resume
> + */
> +
> +static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	int ret = 0;
> +
> +	mutex_lock(&state->lock);
> +
> +	if (state->state & ST_POWERED) {
> +		imx8mq_mipi_csi_stop_stream(state);
> +		imx8mq_mipi_csi_clk_disable(state);
> +		state->state &= ~ST_POWERED;
> +		if (!runtime)
> +			state->state |= ST_SUSPENDED;
> +	}
> +
> +	mutex_unlock(&state->lock);
> +
> +	ret = icc_set_bw(state->icc_path, 0, 0);
> +	if (ret)
> +		dev_err(dev, "icc_set_bw failed with %d\n", ret);
> +
> +	return ret ? -EAGAIN : 0;
> +}
> +
> +static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +	int ret = 0;
> +
> +	ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
> +	if (ret) {
> +		dev_err(dev, "icc_set_bw failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	mutex_lock(&state->lock);
> +
> +	if (!runtime && !(state->state & ST_SUSPENDED))
> +		goto unlock;
> +
> +	if (!(state->state & ST_POWERED)) {
> +		state->state |= ST_POWERED;
> +		ret = imx8mq_mipi_csi_clk_enable(state);

Enabling the clocks in the PM resume handler is correct, but they should
also be disabled in the PM suspend handler.

> +	}
> +	if (state->state & ST_STREAMING)
> +		imx8mq_mipi_csi_start_stream(state);

This will cause problems when the i.MX7 CSI bridge driver will implement
runtime PM support, as it should then start and stop the whole pipeline,
which will conflict with the code here. We can handle this later I
suppose.

> +
> +	state->state &= ~ST_SUSPENDED;
> +
> +unlock:
> +	mutex_unlock(&state->lock);
> +
> +	return ret ? -EAGAIN : 0;
> +}
> +
> +static int __maybe_unused imx8mq_mipi_csi_suspend(struct device *dev)
> +{
> +	return imx8mq_mipi_csi_pm_suspend(dev, false);
> +}
> +
> +static int __maybe_unused imx8mq_mipi_csi_resume(struct device *dev)
> +{
> +	return imx8mq_mipi_csi_pm_resume(dev, false);
> +}
> +
> +static int __maybe_unused imx8mq_mipi_csi_runtime_suspend(struct device *dev)
> +{
> +	return imx8mq_mipi_csi_pm_suspend(dev, true);
> +}
> +
> +static int __maybe_unused imx8mq_mipi_csi_runtime_resume(struct device *dev)
> +{
> +	return imx8mq_mipi_csi_pm_resume(dev, true);
> +}
> +
> +static const struct dev_pm_ops imx8mq_mipi_csi_pm_ops = {
> +	SET_RUNTIME_PM_OPS(imx8mq_mipi_csi_runtime_suspend,
> +			   imx8mq_mipi_csi_runtime_resume,
> +			   NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(imx8mq_mipi_csi_suspend, imx8mq_mipi_csi_resume)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe/remove & platform driver
> + */
> +
> +static int imx8mq_mipi_csi_subdev_init(struct csi_state *state)
> +{
> +	struct v4l2_subdev *sd = &state->sd;
> +
> +	v4l2_subdev_init(sd, &imx8mq_mipi_csi_subdev_ops);
> +	sd->owner = THIS_MODULE;
> +	snprintf(sd->name, sizeof(sd->name), "%s.%d",
> +		 MIPI_CSI2_SUBDEV_NAME, state->index);

state->index is always 0. To ensure uniqueness of entity names, in case
an SoC integrates multiple instances of this subdev, I would replace
state->index with dev_name(state->dev) and the format string with "%s
%s".

> +
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	sd->ctrl_handler = NULL;

You could drop this line as all fields are zero-initialized.

> +
> +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> +	sd->entity.ops = &imx8mq_mipi_csi_entity_ops;
> +
> +	sd->dev = state->dev;
> +
> +	state->csi2_fmt = &imx8mq_mipi_csi_formats[0];
> +	imx8mq_mipi_csi_init_cfg(sd, NULL);
> +
> +	state->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
> +					 | MEDIA_PAD_FL_MUST_CONNECT;
> +	state->pads[MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE
> +					   | MEDIA_PAD_FL_MUST_CONNECT;
> +	return media_entity_pads_init(&sd->entity, MIPI_CSI2_PADS_NUM,
> +				      state->pads);
> +}
> +
> +static void imx8mq_mipi_csi_release_icc(struct platform_device *pdev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +
> +	icc_put(state->icc_path);
> +}
> +
> +static int imx8mq_mipi_csi_init_icc(struct platform_device *pdev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +
> +	/* Optional interconnect request */
> +	state->icc_path = of_icc_get(&pdev->dev, "dram");
> +	if (IS_ERR_OR_NULL(state->icc_path))
> +		return PTR_ERR_OR_ZERO(state->icc_path);
> +
> +	state->icc_path_bw = MBps_to_icc(700);
> +
> +	return 0;
> +}
> +
> +static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
> +{
> +	struct device *dev = state->dev;
> +	struct device_node *np = state->dev->of_node;
> +	struct device_node *node;
> +	phandle ph;
> +	u32 out_val[2];
> +	int ret = 0;
> +
> +	state->rst = devm_reset_control_array_get_exclusive(dev);
> +	if (IS_ERR(state->rst)) {
> +		dev_err(dev, "Failed to get reset: %pe\n", state->rst);
> +		return PTR_ERR(state->rst);
> +	}
> +
> +	ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
> +					 ARRAY_SIZE(out_val));
> +	if (ret) {
> +		dev_err(dev, "no fsl,mipi-phy-gpr property found: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ph = *out_val;
> +
> +	node = of_find_node_by_phandle(ph);
> +	if (!node) {
> +		ret = -ENODEV;
> +		dev_err(dev, "Error finding node by phandle\n");
> +		goto out;

You can return -ENODEV directly here, there's no need to call
of_node_put(node) as node is NULL.

> +	}
> +	state->phy_gpr = syscon_node_to_regmap(node);

I'd call

	of_node_put(node);

here, and you can drop the out label.

> +	if (IS_ERR(state->phy_gpr)) {
> +		ret = PTR_ERR(state->phy_gpr);
> +		dev_err(dev, "failed to get gpr regmap: %pe\n", state->phy_gpr);
> +		goto out;
> +	}
> +
> +	state->phy_gpr_reg = out_val[1];
> +	dev_dbg(dev, "phy gpr register set to 0x%X\n", state->phy_gpr_reg);
> +
> +out:
> +	of_node_put(node);
> +	return ret;
> +}
> +
> +static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct csi_state *state;
> +	int ret;
> +
> +	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
> +	if (!state)
> +		return -ENOMEM;
> +
> +	mutex_init(&state->lock);
> +
> +	state->dev = dev;
> +
> +	ret = imx8mq_mipi_csi_parse_dt(state);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to parse device tree: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Acquire resources. */
> +	state->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(state->regs))
> +		return PTR_ERR(state->regs);
> +
> +	ret = imx8mq_mipi_csi_clk_get(state);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Initialize and register the subdev. */
> +	ret = imx8mq_mipi_csi_subdev_init(state);
> +	if (ret < 0)
> +		goto disable_clock;
> +
> +	platform_set_drvdata(pdev, &state->sd);
> +
> +	ret = imx8mq_mipi_csi_async_register(state);
> +	if (ret < 0) {
> +		dev_err(dev, "async register failed: %d\n", ret);
> +		goto cleanup;
> +	}

This should be the last operation, as the subdev could be used as soon
as it gets registered.

> +
> +	ret = imx8mq_mipi_csi_init_icc(pdev);
> +	if (ret)
> +		goto cleanup;
> +
> +	/* Enable runtime PM. */
> +	pm_runtime_enable(dev);
> +	if (!pm_runtime_enabled(dev)) {
> +		ret = imx8mq_mipi_csi_pm_resume(dev, true);
> +		if (ret < 0) {
> +			imx8mq_mipi_csi_release_icc(pdev);
> +			goto cleanup;
> +		}
> +	}
> +
> +	return 0;
> +
> +cleanup:
> +	media_entity_cleanup(&state->sd.entity);
> +	v4l2_async_notifier_unregister(&state->notifier);
> +	v4l2_async_notifier_cleanup(&state->notifier);
> +	v4l2_async_unregister_subdev(&state->sd);
> +disable_clock:
> +	imx8mq_mipi_csi_clk_disable(state);
> +	mutex_destroy(&state->lock);
> +
> +	return ret;
> +}
> +
> +static int imx8mq_mipi_csi_remove(struct platform_device *pdev)
> +{
> +	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
> +	struct csi_state *state = mipi_sd_to_csi2_state(sd);
> +
> +	v4l2_async_notifier_unregister(&state->notifier);
> +	v4l2_async_notifier_cleanup(&state->notifier);
> +	v4l2_async_unregister_subdev(&state->sd);
> +
> +	pm_runtime_disable(&pdev->dev);
> +	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
> +	imx8mq_mipi_csi_clk_disable(state);
> +	media_entity_cleanup(&state->sd.entity);
> +	mutex_destroy(&state->lock);
> +	pm_runtime_set_suspended(&pdev->dev);
> +	imx8mq_mipi_csi_release_icc(pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
> +	{ .compatible = "fsl,imx8mq-mipi-csi2",},

Missing space before }

> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
> +
> +static struct platform_driver imx8mq_mipi_csi_driver = {
> +	.probe		= imx8mq_mipi_csi_probe,
> +	.remove		= imx8mq_mipi_csi_remove,
> +	.driver		= {
> +		.of_match_table = imx8mq_mipi_csi_of_match,
> +		.name		= MIPI_CSI2_DRIVER_NAME,
> +		.pm		= &imx8mq_mipi_csi_pm_ops,
> +	},
> +};
> +
> +module_platform_driver(imx8mq_mipi_csi_driver);
> +
> +MODULE_DESCRIPTION("i.MX8MQ MIPI CSI-2 receiver driver");
> +MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@puri.sm>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:imx8mq-mipi-csi2");

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-07-12 21:52   ` Laurent Pinchart
@ 2021-07-14  6:41     ` Martin Kepplinger
  2021-07-14  8:30       ` Laurent Pinchart
  0 siblings, 1 reply; 8+ messages in thread
From: Martin Kepplinger @ 2021-07-14  6:41 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: m.felsch, robh, devicetree, festevam, kernel, kernel, krzk,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, mchehab, phone-devel, shawnguo, slongerbeam

Am Dienstag, dem 13.07.2021 um 00:52 +0300 schrieb Laurent Pinchart:
> Hi Martin,
> 
> Thank you for the patch.

thank you for reviewing!

> 
> On Fri, Jun 18, 2021 at 11:57:52AM +0200, Martin Kepplinger wrote:
> > Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware
> > side
> > is based on
> >  
> > https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0
> > 
> > It's built as part of VIDEO_IMX7_CSI because that's documented to
> > support
> > i.MX8M platforms. This driver adds i.MX8MQ support where currently
> > only the
> > i.MX8MM platform has been supported.
> 
> Overall this is really nice work. I have quite a few review comments,
> but hopefully nothing that should be difficult to handle.

I think so too but right now I have one question:

> 
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > ---
> >  drivers/staging/media/imx/Makefile           |   1 +
> >  drivers/staging/media/imx/imx8mq-mipi-csi2.c | 963
> > +++++++++++++++++++
> >  2 files changed, 964 insertions(+)
> >  create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c
> > 
> > 


> > +static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool
> > runtime)
> > +{
> > +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +       struct csi_state *state = mipi_sd_to_csi2_state(sd);
> > +       int ret = 0;
> > +
> > +       mutex_lock(&state->lock);
> > +
> > +       if (state->state & ST_POWERED) {
> > +               imx8mq_mipi_csi_stop_stream(state);
> > +               imx8mq_mipi_csi_clk_disable(state);
> > +               state->state &= ~ST_POWERED;
> > +               if (!runtime)
> > +                       state->state |= ST_SUSPENDED;
> > +       }
> > +
> > +       mutex_unlock(&state->lock);
> > +
> > +       ret = icc_set_bw(state->icc_path, 0, 0);
> > +       if (ret)
> > +               dev_err(dev, "icc_set_bw failed with %d\n", ret);
> > +
> > +       return ret ? -EAGAIN : 0;
> > +}
> > +
> > +static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool
> > runtime)
> > +{
> > +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +       struct csi_state *state = mipi_sd_to_csi2_state(sd);
> > +       int ret = 0;
> > +
> > +       ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
> > +       if (ret) {
> > +               dev_err(dev, "icc_set_bw failed with %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       mutex_lock(&state->lock);
> > +
> > +       if (!runtime && !(state->state & ST_SUSPENDED))
> > +               goto unlock;
> > +
> > +       if (!(state->state & ST_POWERED)) {
> > +               state->state |= ST_POWERED;
> > +               ret = imx8mq_mipi_csi_clk_enable(state);
> 
> Enabling the clocks in the PM resume handler is correct, but they
> should
> also be disabled in the PM suspend handler.

imx8mq_mipi_csi_clk_disable() is called in suspend(). I don't know what
you mean here.


again, thank you for reviewing,

                                       martin



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-07-14  6:41     ` Martin Kepplinger
@ 2021-07-14  8:30       ` Laurent Pinchart
  0 siblings, 0 replies; 8+ messages in thread
From: Laurent Pinchart @ 2021-07-14  8:30 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: m.felsch, robh, devicetree, festevam, kernel, kernel, krzk,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, mchehab, phone-devel, shawnguo, slongerbeam

Hi Martin,

On Wed, Jul 14, 2021 at 08:41:58AM +0200, Martin Kepplinger wrote:
> Am Dienstag, dem 13.07.2021 um 00:52 +0300 schrieb Laurent Pinchart:
> > Hi Martin,
> > 
> > Thank you for the patch.
> 
> thank you for reviewing!
> 
> > On Fri, Jun 18, 2021 at 11:57:52AM +0200, Martin Kepplinger wrote:
> > > Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware
> > > side
> > > is based on
> > >  
> > > https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0
> > > 
> > > It's built as part of VIDEO_IMX7_CSI because that's documented to
> > > support
> > > i.MX8M platforms. This driver adds i.MX8MQ support where currently
> > > only the
> > > i.MX8MM platform has been supported.
> > 
> > Overall this is really nice work. I have quite a few review comments,
> > but hopefully nothing that should be difficult to handle.
> 
> I think so too but right now I have one question:
> 
> > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > > ---
> > >  drivers/staging/media/imx/Makefile           |   1 +
> > >  drivers/staging/media/imx/imx8mq-mipi-csi2.c | 963 +++++++++++++++++++
> > >  2 files changed, 964 insertions(+)
> > >  create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

[snip]

> > > +static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
> > > +{
> > > +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > > +       struct csi_state *state = mipi_sd_to_csi2_state(sd);
> > > +       int ret = 0;
> > > +
> > > +       mutex_lock(&state->lock);
> > > +
> > > +       if (state->state & ST_POWERED) {
> > > +               imx8mq_mipi_csi_stop_stream(state);
> > > +               imx8mq_mipi_csi_clk_disable(state);
> > > +               state->state &= ~ST_POWERED;
> > > +               if (!runtime)
> > > +                       state->state |= ST_SUSPENDED;
> > > +       }
> > > +
> > > +       mutex_unlock(&state->lock);
> > > +
> > > +       ret = icc_set_bw(state->icc_path, 0, 0);
> > > +       if (ret)
> > > +               dev_err(dev, "icc_set_bw failed with %d\n", ret);
> > > +
> > > +       return ret ? -EAGAIN : 0;
> > > +}
> > > +
> > > +static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
> > > +{
> > > +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > > +       struct csi_state *state = mipi_sd_to_csi2_state(sd);
> > > +       int ret = 0;
> > > +
> > > +       ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
> > > +       if (ret) {
> > > +               dev_err(dev, "icc_set_bw failed with %d\n", ret);
> > > +               return ret;
> > > +       }
> > > +
> > > +       mutex_lock(&state->lock);
> > > +
> > > +       if (!runtime && !(state->state & ST_SUSPENDED))
> > > +               goto unlock;
> > > +
> > > +       if (!(state->state & ST_POWERED)) {
> > > +               state->state |= ST_POWERED;
> > > +               ret = imx8mq_mipi_csi_clk_enable(state);
> > 
> > Enabling the clocks in the PM resume handler is correct, but they should
> > also be disabled in the PM suspend handler.
> 
> imx8mq_mipi_csi_clk_disable() is called in suspend(). I don't know what
> you mean here.

I wonder what I was thinking... You can ignore this comment.

However, imx8mq_mipi_csi_clk_disable() is also called in the error path
of the probe function and in the remove function. I don't think this is
right.

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2021-07-14  8:31 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-18  9:57 [PATCH v5 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
2021-06-18  9:57 ` [PATCH v5 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
2021-07-12 19:11   ` Rob Herring
2021-06-18  9:57 ` [PATCH v5 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
2021-07-12 21:52   ` Laurent Pinchart
2021-07-14  6:41     ` Martin Kepplinger
2021-07-14  8:30       ` Laurent Pinchart
2021-06-18  9:57 ` [PATCH v5 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).