[PATCH 0/4] staging: rtl8192e: code cleanup patches

[PATCH 0/4] staging: rtl8192e: code cleanup patches

[Khadija Kamran]

Fix several cleanup issues reported by checkpatch.pl in module
staging/rtl8192e in file rtllib_rx.c

Khadija Kamran (4):
  staging: rtl8192e: remove extra blank lines
  staging: rtl8192e: add blank lines after declarations
  staging: rtl8192e: add spaces around binary operators
  staging: rtl8192e: remove blank lines after '{'

 drivers/staging/rtl8192e/rtllib_rx.c | 73 +++++++++++-----------------
 1 file changed, 29 insertions(+), 44 deletions(-)

-- 
2.34.1

[PATCH 1/4] staging: rtl8192e: remove extra blank lines

[Khadija Kamran]

Remove extra blank lines as reported by checkpatch.pl

"CHECK: Please don't use multiple blank lines"

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
---
 drivers/staging/rtl8192e/rtllib_rx.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index c394c21beefb..c6114d99829b 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -154,7 +154,6 @@ rtllib_frag_cache_get(struct rtllib_device *ieee,
 	return skb;
 }
 
-
 /* Called only as a tasklet (software IRQ) */
 static int rtllib_frag_cache_invalidate(struct rtllib_device *ieee,
 					   struct rtllib_hdr_4addr *hdr)
@@ -318,7 +317,6 @@ rtllib_rx_frame_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,
 	return res;
 }
 
-
 /* Called only as a tasklet (software IRQ), by rtllib_rx */
 static inline int
 rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,
@@ -355,7 +353,6 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,
 	return 0;
 }
 
-
 /* this function is stolen from ipw2200 driver*/
 #define IEEE_PACKET_RETRY_TIME (5*HZ)
 static int is_duplicate_packet(struct rtllib_device *ieee,
@@ -887,7 +884,6 @@ static u8 parse_subframe(struct rtllib_device *ieee, struct sk_buff *skb,
 	return rxb->nr_subframes;
 }
 
-
 static size_t rtllib_rx_get_hdrlen(struct rtllib_device *ieee,
 				   struct sk_buff *skb,
 				   struct rtllib_rx_stats *rx_stats)
@@ -1569,7 +1565,6 @@ static int rtllib_verify_qos_info(struct rtllib_qos_information_element
 	return 0;
 }
 
-
 /* Parse a QoS parameter element */
 static int rtllib_read_qos_param_element(
 			struct rtllib_qos_parameter_info *element_param,
@@ -1599,7 +1594,6 @@ static int rtllib_read_qos_info_element(
 	return rtllib_verify_qos_info(element_info, QOS_OUI_INFO_SUB_TYPE);
 }
 
-
 /* Write QoS parameters from the ac parameters. */
 static int rtllib_qos_convert_ac_to_parameters(struct rtllib_qos_parameter_info *param_elm,
 					       struct rtllib_qos_data *qos_data)
@@ -1843,7 +1837,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee,
 		}
 	}
 
-
 	if (*tmp_htinfo_len == 0) {
 		if (info_element->len >= 4 &&
 		    info_element->data[0] == 0x00 &&
@@ -1932,7 +1925,6 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee,
 	    info_element->data[2] == 0x96)
 		network->cisco_cap_exist = true;
 
-
 	if (info_element->len >= 3 &&
 	    info_element->data[0] == 0x00 &&
 	    info_element->data[1] == 0x0a &&
@@ -2142,13 +2134,11 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
 
 			network->dtim_data = RTLLIB_DTIM_VALID;
 
-
 			if (info_element->data[2] & 1)
 				network->dtim_data |= RTLLIB_DTIM_MBCAST;
 
 			offset = (info_element->data[2] >> 1)*2;
 
-
 			if (ieee->assoc_id < 8*offset ||
 			    ieee->assoc_id > 8*(offset + info_element->len - 3))
 				break;
@@ -2203,7 +2193,6 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
 						 &tmp_htcap_len);
 			break;
 
-
 		case MFIE_TYPE_HT_INFO:
 			netdev_dbg(ieee->dev, "MFIE_TYPE_HT_INFO: %d bytes\n",
 				   info_element->len);
@@ -2392,7 +2381,6 @@ static inline int is_same_network(struct rtllib_network *src,
 		(dst->capability & WLAN_CAPABILITY_ESS)));
 }
 
-
 static inline void update_network(struct rtllib_device *ieee,
 				  struct rtllib_network *dst,
 				  struct rtllib_network *src)
@@ -2580,7 +2568,6 @@ static inline void rtllib_process_probe_response(
 		goto free_network;
 	}
 
-
 	if (!rtllib_legal_channel(ieee, network->channel))
 		goto free_network;
 
-- 
2.34.1

[PATCH 2/4] staging: rtl8192e: add blank lines after declarations

[Khadija Kamran]

Add blank lines after declarations as reported by checkpatch.pl

"CHECK: Please use a blank line after function/struct/union/enum
declarations"

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
---
 drivers/staging/rtl8192e/rtllib_rx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index c6114d99829b..7144a0630ea6 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -231,10 +231,12 @@ rtllib_rx_frame_mgmt(struct rtllib_device *ieee, struct sk_buff *skb,
 static unsigned char rfc1042_header[] = {
 	0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00
 };
+
 /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
 static unsigned char bridge_tunnel_header[] = {
 	0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8
 };
+
 /* No encapsulation header if EtherType < 0x600 (=length) */
 
 /* Called by rtllib_rx_frame_decrypt */
-- 
2.34.1

[PATCH 3/4] staging: rtl8192e: add spaces around binary operators

[Khadija Kamran]

Use spaces around binary operators as suggested by Linux kernel coding
style.
Issues reported by checkpatch.pl for the following binary operators:
	+ , - , * , | , <<

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
---
 drivers/staging/rtl8192e/rtllib_rx.c | 54 ++++++++++++++--------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 7144a0630ea6..f627dfe66d90 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -356,7 +356,7 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,
 }
 
 /* this function is stolen from ipw2200 driver*/
-#define IEEE_PACKET_RETRY_TIME (5*HZ)
+#define IEEE_PACKET_RETRY_TIME (5 * HZ)
 static int is_duplicate_packet(struct rtllib_device *ieee,
 				      struct rtllib_hdr_4addr *header)
 {
@@ -936,7 +936,7 @@ static int rtllib_rx_check_duplicate(struct rtllib_device *ieee,
 
 		if (GetTs(ieee, (struct ts_common_info **)&pRxTS, hdr->addr2,
 			(u8)Frame_QoSTID((u8 *)(skb->data)), RX_DIR, true)) {
-			if ((fc & (1<<11)) && (frag == pRxTS->rx_last_frag_num) &&
+			if ((fc & (1 << 11)) && (frag == pRxTS->rx_last_frag_num) &&
 			    (WLAN_GET_SEQ_SEQ(sc) == pRxTS->rx_last_seq_num))
 				return -1;
 			pRxTS->rx_last_frag_num = frag;
@@ -1619,23 +1619,23 @@ static int rtllib_qos_convert_ac_to_parameters(struct rtllib_qos_parameter_info
 		case 1:
 			/* BIT(0) | BIT(3) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<0)|(0x01<<3);
+				qos_data->wmm_acm |= (0x01 << 0) | (0x01 << 3);
 			break;
 		case 2:
 			/* BIT(4) | BIT(5) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<4)|(0x01<<5);
+				qos_data->wmm_acm |= (0x01 << 4) | (0x01 << 5);
 			break;
 		case 3:
 			/* BIT(6) | BIT(7) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<6)|(0x01<<7);
+				qos_data->wmm_acm |= (0x01 << 6) | (0x01 << 7);
 			break;
 		case 0:
 		default:
 			/* BIT(1) | BIT(2) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<1)|(0x01<<2);
+				qos_data->wmm_acm |= (0x01 << 1) | (0x01 << 2);
 			break;
 		}
 
@@ -1979,7 +1979,7 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee,
 	    info_element->data[3] == 0x04) {
 		netdev_dbg(ieee->dev, "MFIE_TYPE_WZC: %d bytes\n",
 			   info_element->len);
-		network->wzc_ie_len = min(info_element->len+2, MAX_WZC_IE_LEN);
+		network->wzc_ie_len = min(info_element->len + 2, MAX_WZC_IE_LEN);
 		memcpy(network->wzc_ie, info_element, network->wzc_ie_len);
 	}
 }
@@ -2139,10 +2139,10 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
 			if (info_element->data[2] & 1)
 				network->dtim_data |= RTLLIB_DTIM_MBCAST;
 
-			offset = (info_element->data[2] >> 1)*2;
+			offset = (info_element->data[2] >> 1) * 2;
 
-			if (ieee->assoc_id < 8*offset ||
-			    ieee->assoc_id > 8*(offset + info_element->len - 3))
+			if (ieee->assoc_id < 8 * offset ||
+			    ieee->assoc_id > 8 * (offset + info_element->len - 3))
 				break;
 
 			offset = (ieee->assoc_id / 8) - offset;
@@ -2357,7 +2357,7 @@ static inline int rtllib_network_init(
 	if (rtllib_is_empty_essid(network->ssid, network->ssid_len))
 		network->flags |= NETWORK_EMPTY_ESSID;
 	stats->signal = 30 + (stats->SignalStrength * 70) / 100;
-	stats->noise = rtllib_translate_todbm((u8)(100-stats->signal)) - 25;
+	stats->noise = rtllib_translate_todbm((u8)(100 - stats->signal)) - 25;
 
 	memcpy(&network->stats, stats, sizeof(network->stats));
 
@@ -2545,22 +2545,22 @@ static inline void rtllib_process_probe_response(
 		   "'%s' ( %pM ): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
 		   escape_essid(info_element->data, info_element->len),
 		   beacon->header.addr3,
-		   (le16_to_cpu(beacon->capability) & (1<<0xf)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xe)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xd)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xc)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xb)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xa)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x9)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x8)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x7)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x6)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x5)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x4)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x3)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x2)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x1)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x0)) ? '1' : '0');
+		   (le16_to_cpu(beacon->capability) & (1 << 0xf)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xe)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xd)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xc)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xb)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xa)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x9)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x8)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x7)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x6)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x5)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x4)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x3)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x2)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x1)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x0)) ? '1' : '0');
 
 	if (rtllib_network_init(ieee, beacon, network, stats)) {
 		netdev_dbg(ieee->dev, "Dropped '%s' ( %pM) via %s.\n",
-- 
2.34.1

[PATCH 4/4] staging: rtl8192e: remove blank lines after '{'

[Khadija Kamran]

Remove unnecessary blank lines after an open brace as reported by
checkpatch.pl

"CHECK: Blank lines aren't necessary after an open brace '{'"

Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
---
 drivers/staging/rtl8192e/rtllib_rx.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index f627dfe66d90..b649d02dc5c8 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -1167,7 +1167,6 @@ static int rtllib_rx_decrypt(struct rtllib_device *ieee, struct sk_buff *skb,
 	if (crypt && !(fc & RTLLIB_FCTL_WEP) && !ieee->open_wep) {
 		if (/*ieee->ieee802_1x &&*/
 		    rtllib_is_eapol_frame(ieee, skb, hdrlen)) {
-
 			/* pass unencrypted EAPOL frames even if encryption is
 			 * configured
 			 */
@@ -1207,7 +1206,6 @@ static void rtllib_rx_check_leave_lps(struct rtllib_device *ieee, u8 unicast,
 				      u8 nr_subframes)
 {
 	if (unicast) {
-
 		if (ieee->state == RTLLIB_LINKED) {
 			if (((ieee->link_detect_info.NumRxUnicastOkInPeriod +
 			    ieee->link_detect_info.NumTxOkInPeriod) > 8) ||
@@ -1552,7 +1550,6 @@ static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 static int rtllib_verify_qos_info(struct rtllib_qos_information_element
 				     *info_element, int sub_type)
 {
-
 	if (info_element->elementID != QOS_ELEMENT_ID)
 		return -1;
 	if (info_element->qui_subtype != sub_type)
@@ -2696,7 +2693,6 @@ static void rtllib_rx_mgt(struct rtllib_device *ieee,
 		ieee->last_rx_ps_time = jiffies;
 
 	switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl))) {
-
 	case RTLLIB_STYPE_BEACON:
 		netdev_dbg(ieee->dev, "received BEACON (%d)\n",
 			   WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)));
-- 
2.34.1

Re: [PATCH 0/4] staging: rtl8192e: code cleanup patches

[Philipp Hortmann]

On 3/22/23 23:07, Khadija Kamran wrote:
> Fix several cleanup issues reported by checkpatch.pl in module
> staging/rtl8192e in file rtllib_rx.c
> 
> Khadija Kamran (4):
>    staging: rtl8192e: remove extra blank lines
>    staging: rtl8192e: add blank lines after declarations
>    staging: rtl8192e: add spaces around binary operators
>    staging: rtl8192e: remove blank lines after '{'
> 
>   drivers/staging/rtl8192e/rtllib_rx.c | 73 +++++++++++-----------------
>   1 file changed, 29 insertions(+), 44 deletions(-)
> 

Checkpatch:
WARNING: From:/Signed-off-by: email address mismatch: 'From: Khadija 
Kamran <kkamran.bese16seecs@seecs.edu.pk>' != 'Signed-off-by: Khadija 
Kamran <kamrankhadijadj@gmail.com>'

Is this wanted?


Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>

Re: [PATCH 0/4] staging: rtl8192e: code cleanup patches

[Khadija Kamran]

On Thu, Mar 23, 2023 at 06:56:32AM +0100, Philipp Hortmann wrote:
> On 3/22/23 23:07, Khadija Kamran wrote:
> > Fix several cleanup issues reported by checkpatch.pl in module
> > staging/rtl8192e in file rtllib_rx.c
> > 
> > Khadija Kamran (4):
> >    staging: rtl8192e: remove extra blank lines
> >    staging: rtl8192e: add blank lines after declarations
> >    staging: rtl8192e: add spaces around binary operators
> >    staging: rtl8192e: remove blank lines after '{'
> > 
> >   drivers/staging/rtl8192e/rtllib_rx.c | 73 +++++++++++-----------------
> >   1 file changed, 29 insertions(+), 44 deletions(-)
> > 
> 
> Checkpatch:
> WARNING: From:/Signed-off-by: email address mismatch: 'From: Khadija Kamran
> <kkamran.bese16seecs@seecs.edu.pk>' != 'Signed-off-by: Khadija Kamran
> <kamrankhadijadj@gmail.com>'
> 
> Is this wanted?
>

Hey Philipp,

Sorry about this. 
Let me resend the patch and fix this problem.

Regards,
Khadija 

> 
> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>