* [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
@ 2021-05-03 14:29 Chukun Pan
2021-05-11 5:21 ` Naresh Kamboju
0 siblings, 1 reply; 7+ messages in thread
From: Chukun Pan @ 2021-05-03 14:29 UTC (permalink / raw)
To: Rob Herring
Cc: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel, Chukun Pan
The NanoPi R1S H5 is a open source board made by FriendlyElec.
It has the following features:
- Allwinner H5, Quad-core Cortex-A53
- 512MB DDR3 RAM
- 10/100/1000M Ethernet x 2
- RTL8189ETV WiFi 802.11b/g/n
- USB 2.0 host port (A)
- MicroSD Slot
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 194 ++++++++++++++++++
2 files changed, 195 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 41ce680e5f8d..a96d9d2d8dd8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 000000000000..1fe517db9d85
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ * Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "FriendlyARM NanoPi R1S H5";
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0x1>;
+ states = <1100000 0x0>, <1300000 0x1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: sdio_wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
2021-05-03 14:29 [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
@ 2021-05-11 5:21 ` Naresh Kamboju
2021-05-11 8:18 ` Maxime Ripard
0 siblings, 1 reply; 7+ messages in thread
From: Naresh Kamboju @ 2021-05-11 5:21 UTC (permalink / raw)
To: Chukun Pan, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
Cc: Rob Herring, Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec,
Linux ARM, linux-sunxi, open list, lkft-triage, regressions
On Mon, 3 May 2021 at 20:09, Chukun Pan <amadeus@jmu.edu.cn> wrote:
>
> The NanoPi R1S H5 is a open source board made by FriendlyElec.
> It has the following features:
>
> - Allwinner H5, Quad-core Cortex-A53
> - 512MB DDR3 RAM
> - 10/100/1000M Ethernet x 2
> - RTL8189ETV WiFi 802.11b/g/n
> - USB 2.0 host port (A)
> - MicroSD Slot
> - Serial Debug Port
> - 5V 2A DC power-supply
>
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Linux next tag next-20210511 arm64 build failed due to this error.
Error: /builds/linux/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts:35.15-16
syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [/builds/linux/scripts/Makefile.lib:365:
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dtb] Error 1
make[3]: Target '__build' not remade because of errors.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
#regzb introduced: 7c9dbeda744f ("arm64: dts: allwinner: h5: Add
NanoPi R1S H5 support")
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 194 ++++++++++++++++++
> 2 files changed, 195 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
steps to reproduce:
--------------------------
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of
# architectures, toolchains, kernel configurations, and make targets.
#
# TuxMake supports the concept of runtimes.
# See https://docs.tuxmake.org/runtimes/, for that to work it requires
# that you install podman or docker on your system.
#
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
#
# See https://docs.tuxmake.org/ for complete documentation.
tuxmake --runtime podman --target-arch arm64 --toolchain gcc-9
--kconfig defconfig --kconfig-add
https://builds.tuxbuild.com/1sNFFZazb6TLzCYLxNoyIcWs0eU/config
metadata:
git branch: master
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git commit: 4bf27b1f73303c33c5570b63f8ed734abcd1991f
git describe: next-20210511
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
2021-05-11 5:21 ` Naresh Kamboju
@ 2021-05-11 8:18 ` Maxime Ripard
2021-05-16 16:35 ` [PATCH v2 0/2] Add support for NanoPi R1S H5 Chukun Pan
0 siblings, 1 reply; 7+ messages in thread
From: Maxime Ripard @ 2021-05-11 8:18 UTC (permalink / raw)
To: Naresh Kamboju
Cc: Chukun Pan,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Rob Herring, Chen-Yu Tsai, Jernej Skrabec, Linux ARM,
linux-sunxi, open list, lkft-triage, regressions
[-- Attachment #1: Type: text/plain, Size: 1209 bytes --]
Hi,
On Tue, May 11, 2021 at 10:51:28AM +0530, Naresh Kamboju wrote:
> On Mon, 3 May 2021 at 20:09, Chukun Pan <amadeus@jmu.edu.cn> wrote:
> >
> > The NanoPi R1S H5 is a open source board made by FriendlyElec.
> > It has the following features:
> >
> > - Allwinner H5, Quad-core Cortex-A53
> > - 512MB DDR3 RAM
> > - 10/100/1000M Ethernet x 2
> > - RTL8189ETV WiFi 802.11b/g/n
> > - USB 2.0 host port (A)
> > - MicroSD Slot
> > - Serial Debug Port
> > - 5V 2A DC power-supply
> >
> > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
>
> Linux next tag next-20210511 arm64 build failed due to this error.
>
> Error: /builds/linux/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts:35.15-16
> syntax error
> FATAL ERROR: Unable to parse input tree
> make[3]: *** [/builds/linux/scripts/Makefile.lib:365:
> arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dtb] Error 1
> make[3]: Target '__build' not remade because of errors.
>
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>
> #regzb introduced: 7c9dbeda744f ("arm64: dts: allwinner: h5: Add
> NanoPi R1S H5 support")
Thanks, I dropped the patch.
Chukun, please resend it once it's fixed
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 0/2] Add support for NanoPi R1S H5
2021-05-11 8:18 ` Maxime Ripard
@ 2021-05-16 16:35 ` Chukun Pan
2021-05-16 16:35 ` [PATCH v2 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Chukun Pan @ 2021-05-16 16:35 UTC (permalink / raw)
To: maxime
Cc: amadeus, devicetree, jernej.skrabec, linux-arm-kernel,
linux-kernel, linux-sunxi, lkft-triage, naresh.kamboju,
regressions, robh+dt, wens
I'm very sorry for the compilation error caused by the patches I sent
before, now fixed it.
Changes from v2:
* Added missing header file in the dts.
* Collected acked-by.
Chukun Pan (2):
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
.../devicetree/bindings/arm/sunxi.yaml | 5 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
3 files changed, 201 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
2021-05-16 16:35 ` [PATCH v2 0/2] Add support for NanoPi R1S H5 Chukun Pan
@ 2021-05-16 16:35 ` Chukun Pan
2021-05-16 16:35 ` [PATCH v2 2/2] dt-bindings: arm: Add NanoPi R1S H5 Chukun Pan
2021-05-18 14:01 ` [PATCH v2 0/2] Add support for " Maxime Ripard
2 siblings, 0 replies; 7+ messages in thread
From: Chukun Pan @ 2021-05-16 16:35 UTC (permalink / raw)
To: maxime
Cc: amadeus, devicetree, jernej.skrabec, linux-arm-kernel,
linux-kernel, linux-sunxi, lkft-triage, naresh.kamboju,
regressions, robh+dt, wens
The NanoPi R1S H5 is a open source board made by FriendlyElec.
It has the following features:
- Allwinner H5, Quad-core Cortex-A53
- 512MB DDR3 RAM
- 10/100/1000M Ethernet x 2
- RTL8189ETV WiFi 802.11b/g/n
- USB 2.0 host port (A)
- MicroSD Slot
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
2 files changed, 196 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 41ce680e5f8d..a96d9d2d8dd8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 000000000000..55bcdf8d1a07
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ * Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "FriendlyARM NanoPi R1S H5";
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0x1>;
+ states = <1100000 0x0>, <1300000 0x1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: sdio_wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] dt-bindings: arm: Add NanoPi R1S H5
2021-05-16 16:35 ` [PATCH v2 0/2] Add support for NanoPi R1S H5 Chukun Pan
2021-05-16 16:35 ` [PATCH v2 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
@ 2021-05-16 16:35 ` Chukun Pan
2021-05-18 14:01 ` [PATCH v2 0/2] Add support for " Maxime Ripard
2 siblings, 0 replies; 7+ messages in thread
From: Chukun Pan @ 2021-05-16 16:35 UTC (permalink / raw)
To: maxime
Cc: amadeus, devicetree, jernej.skrabec, linux-arm-kernel,
linux-kernel, linux-sunxi, lkft-triage, naresh.kamboju,
regressions, robh+dt, wens
Add the bindings for NanoPi R1S H5 board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index ec8108483b49..889128acf49a 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -275,6 +275,11 @@ properties:
- const: friendlyarm,nanopi-r1
- const: allwinner,sun8i-h3
+ - description: FriendlyARM NanoPi R1S H5
+ items:
+ - const: friendlyarm,nanopi-r1s-h5
+ - const: allwinner,sun50i-h5
+
- description: FriendlyARM ZeroPi
items:
- const: friendlyarm,zeropi
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/2] Add support for NanoPi R1S H5
2021-05-16 16:35 ` [PATCH v2 0/2] Add support for NanoPi R1S H5 Chukun Pan
2021-05-16 16:35 ` [PATCH v2 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
2021-05-16 16:35 ` [PATCH v2 2/2] dt-bindings: arm: Add NanoPi R1S H5 Chukun Pan
@ 2021-05-18 14:01 ` Maxime Ripard
2 siblings, 0 replies; 7+ messages in thread
From: Maxime Ripard @ 2021-05-18 14:01 UTC (permalink / raw)
To: Chukun Pan
Cc: devicetree, jernej.skrabec, linux-arm-kernel, linux-kernel,
linux-sunxi, lkft-triage, naresh.kamboju, regressions, robh+dt,
wens
[-- Attachment #1: Type: text/plain, Size: 275 bytes --]
On Mon, May 17, 2021 at 12:35:21AM +0800, Chukun Pan wrote:
> I'm very sorry for the compilation error caused by the patches I sent
> before, now fixed it.
>
> Changes from v2:
> * Added missing header file in the dts.
> * Collected acked-by.
Applied both, thanks
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-05-18 14:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-03 14:29 [PATCH 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
2021-05-11 5:21 ` Naresh Kamboju
2021-05-11 8:18 ` Maxime Ripard
2021-05-16 16:35 ` [PATCH v2 0/2] Add support for NanoPi R1S H5 Chukun Pan
2021-05-16 16:35 ` [PATCH v2 1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support Chukun Pan
2021-05-16 16:35 ` [PATCH v2 2/2] dt-bindings: arm: Add NanoPi R1S H5 Chukun Pan
2021-05-18 14:01 ` [PATCH v2 0/2] Add support for " Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).