Re: [PATCH v8 08/10] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done

[Dmitry Osipenko <digetx@gmail.com>]

05.08.2020 16:46, Thierry Reding пишет:
> On Mon, Aug 03, 2020 at 08:42:24AM -0700, Sowjanya Komatineni wrote:
>> With the split of MIPI calibration into tegra_mipi_calibrate() and
>> tegra_mipi_wait(), MIPI clock is not kept enabled till the calibration
>> is done.
>>
>> So, this patch skips disabling MIPI clock after triggering start of
>> calibration and disables it only after waiting for done status from
>> the calibration logic.
>>
>> This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration()
>> and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline
>> with their usage.
>>
>> As MIPI clock is left enabled and in case of any failures with CSI input
>> streaming tegra_mipi_finish_calibration() will not get invoked.
>> So added new API tegra_mipi_cancel_calibration() which disables MIPI clock
>> and consumer drivers can call this in such cases.
>>
>> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>  drivers/gpu/drm/tegra/dsi.c |  4 ++--
>>  drivers/gpu/host1x/mipi.c   | 19 ++++++++++---------
>>  include/linux/host1x.h      |  5 +++--
>>  3 files changed, 15 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
>> index 3820e8d..a7864e9 100644
>> --- a/drivers/gpu/drm/tegra/dsi.c
>> +++ b/drivers/gpu/drm/tegra/dsi.c
>> @@ -694,11 +694,11 @@ static int tegra_dsi_pad_calibrate(struct tegra_dsi *dsi)
>>  		DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3);
>>  	tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_3);
>>  
>> -	err = tegra_mipi_calibrate(dsi->mipi);
>> +	err = tegra_mipi_start_calibration(dsi->mipi);
>>  	if (err < 0)
>>  		return err;
>>  
>> -	return tegra_mipi_wait(dsi->mipi);
>> +	return tegra_mipi_finish_calibration(dsi->mipi);
>>  }
>>  
>>  static void tegra_dsi_set_timeout(struct tegra_dsi *dsi, unsigned long bclk,
>> diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
>> index e606464..b15ab6e 100644
>> --- a/drivers/gpu/host1x/mipi.c
>> +++ b/drivers/gpu/host1x/mipi.c
>> @@ -293,17 +293,19 @@ int tegra_mipi_disable(struct tegra_mipi_device *dev)
>>  }
>>  EXPORT_SYMBOL(tegra_mipi_disable);
>>  
>> -int tegra_mipi_wait(struct tegra_mipi_device *device)
>> +void tegra_mipi_cancel_calibration(struct tegra_mipi_device *device)
>> +{
>> +	clk_disable(device->mipi->clk);
> 
> Do we need to do anything with the MIPI_CAL_CTRL and MIPI_CAL_STATUS
> registers here? We don't clear the START bit in the former when the
> calibration has successfully finished, but I suspect that's because
> the bit is self-clearing. But I wonder if we still need to clear it
> upon cancellation to make sure the calibration does indeed stop.

Apparently there is no way to explicitly stop calibration other than to
reset MIPI calibration block, but Sowjanya says this is unnecessary.

Perhaps having a fixed delay before disabling clock could be enough to
ensure that calibration is stopped before the clock is disabled?