From: Steven Rostedt <rostedt@goodmis.org>
To: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Subject: Re: [PATCH v3 02/23] trace-cmd: Extend trace-cmd dump subcommand to display the clock
Date: Wed, 24 Mar 2021 14:02:44 -0400 [thread overview]
Message-ID: <20210324140244.00e1736a@gandalf.local.home> (raw)
In-Reply-To: <20210324135728.3559392c@gandalf.local.home>
On Wed, 24 Mar 2021 13:57:28 -0400
Steven Rostedt <rostedt@goodmis.org> wrote:
> Shouldn't "trace-cmd dump" also show the clock that's stored in the file,
> or will it only show the option?
>
> I'd like to see the file as well, but all I get is:
>
> [Tracing clock]
> No tracing clock saved in the file
>
> Which isn't true. It's just not an option.
Or it is at least inconsistent:
[root@bxtest trace-cmd.git]# ./tracecmd/trace-cmd dump
Tracing meta data in file trace.dat:
[Initial format]
6 [Version]
0 [Little endian]
8 [Bytes in a long]
4096 [Page size, bytes]
[Header page, 205 bytes]
[Header event, 205 bytes]
[Ftrace format, 15 events]
[Events format, 104 systems]
[Kallsyms, 6978379 bytes]
[Trace printk, 4997 bytes]
[Saved command lines, 2015 bytes]
8 [CPUs with tracing data]
[13 options]
[Flyrecord tracing data]
[Tracing clock]
No tracing clock saved in the file
[root@bxtest trace-cmd.git]# ./tracecmd/trace-cmd dump --clock
[Tracing clock]
[tsc2nsec]
-- Steve
next prev parent reply other threads:[~2021-03-24 18:04 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-24 13:03 [PATCH v3 00/23] TSC trace clock to nanosecond conversion Tzvetomir Stoyanov (VMware)
2021-03-24 13:03 ` [PATCH v3 01/23] trace-cmd: Add initial perf interface in trace-cmd library Tzvetomir Stoyanov (VMware)
2021-03-24 13:03 ` [PATCH v3 02/23] trace-cmd: Extend trace-cmd dump subcommand to display the clock Tzvetomir Stoyanov (VMware)
2021-03-24 17:57 ` Steven Rostedt
2021-03-24 18:02 ` Steven Rostedt [this message]
2021-03-24 13:03 ` [PATCH v3 03/23] trace-cmd: Save only the selected clock in the trace.dat file Tzvetomir Stoyanov (VMware)
2021-03-24 13:03 ` [PATCH v3 04/23] trace-cmd: Internal refactoring, move logic for local tep handler in its own function Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 05/23] trace-cmd: Add new local function to check if a trace clock is supported Tzvetomir Stoyanov (VMware)
2021-03-24 17:49 ` Steven Rostedt
2021-03-24 13:04 ` [PATCH v3 06/23] trace-cmd: Add new trace-cmd clock tsc2nsec Tzvetomir Stoyanov (VMware)
2021-03-24 15:05 ` Steven Rostedt
2021-03-24 15:20 ` Steven Rostedt
2021-03-24 15:38 ` Tzvetomir Stoyanov
2021-03-24 16:22 ` Steven Rostedt
2021-03-24 16:56 ` Tzvetomir Stoyanov
2021-03-24 20:55 ` Steven Rostedt
2021-03-24 18:32 ` Steven Rostedt
2021-03-24 18:33 ` Steven Rostedt
2021-03-24 13:04 ` [PATCH v3 07/23] trace-cmd: Define a new option for tsc2nsec conversion Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 08/23] trace-cmd: Save information for tsc to nanoseconds conversion in trace file Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 09/23] trace-cmd: Read information for tsc to nanoseconds conversion from " Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 10/23] trace-cmd: Save tsc2nsec clock in trace.dat file Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 11/23] trace-cmd: Append new options into guest trace file at the end of the tracing session Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 12/23] trace-cmd: Remove unneeded multiply in events timestamp reading Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 13/23] trace-cmd: Perform all timestamp corrections in a single function Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 14/23] trace-cmd: Convert tsc timestamps to nanosecods when reading trace data from a file Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 15/23] trace-cmd: Set order and priorities when applying timestamp corrections Tzvetomir Stoyanov (VMware)
2021-03-24 18:51 ` Steven Rostedt
2021-03-25 6:29 ` Tzvetomir Stoyanov
2021-03-24 13:04 ` [PATCH v3 16/23] trace-cmd: Add a new flag to disable any " Tzvetomir Stoyanov (VMware)
2021-03-24 14:24 ` Steven Rostedt
2021-03-24 15:20 ` Steven Rostedt
2021-03-24 13:04 ` [PATCH v3 17/23] trace-cmd: Change "--nodate" option to affect "--date" option only Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 18/23] trace-cmd: Add new parameter "--raw-ts" to "trace-cmd report" command Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 19/23] trace-cmd: Print times in TimeShift options as unsigned in trace-cmd dump Tzvetomir Stoyanov (VMware)
2021-03-24 15:33 ` Steven Rostedt
2021-03-24 13:04 ` [PATCH v3 20/23] trace-cmd: Use tsc clock for host-guest tracing, if available Tzvetomir Stoyanov (VMware)
2021-03-24 13:04 ` [PATCH v3 21/23] trace-cmd: Get current clock for host-guest tracing session Tzvetomir Stoyanov (VMware)
2021-03-24 21:15 ` Steven Rostedt
2021-03-25 5:13 ` Tzvetomir Stoyanov
2021-03-25 13:41 ` Steven Rostedt
2021-03-24 13:04 ` [PATCH v3 22/23] trace-cmd: Save the trace clocks in TRACECLOCK option Tzvetomir Stoyanov (VMware)
2021-03-24 21:24 ` Steven Rostedt
2021-03-25 5:35 ` Tzvetomir Stoyanov
2021-03-24 13:04 ` [PATCH v3 23/23] trace-cmd: Read at least 8 bytes trace-id option Tzvetomir Stoyanov (VMware)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210324140244.00e1736a@gandalf.local.home \
--to=rostedt@goodmis.org \
--cc=linux-trace-devel@vger.kernel.org \
--cc=tz.stoyanov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).