* [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2)
@ 2021-03-24 17:36 syzbot
2021-03-24 20:05 ` Muhammad Usama Anjum
0 siblings, 1 reply; 4+ messages in thread
From: syzbot @ 2021-03-24 17:36 UTC (permalink / raw)
To: gregkh, linux-kernel, linux-usb, shuah, syzkaller-bugs,
valentina.manea.m
Hello,
syzbot found the following issue on:
HEAD commit: 84196390 Merge tag 'selinux-pr-20210322' of git://git.kern..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=12ea778ad00000
kernel config: https://syzkaller.appspot.com/x/.config?x=5adab0bdee099d7a
dashboard link: https://syzkaller.appspot.com/bug?extid=3dea30b047f41084de66
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=15449662d00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14f81026d00000
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
================================================================================
UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
shift exponent 768 is too large for 32-bit type 'int'
CPU: 0 PID: 8421 Comm: syz-executor852 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
vhci_hub_control.cold+0x20b/0x5f0 drivers/usb/usbip/vhci_hcd.c:605
rh_call_control drivers/usb/core/hcd.c:683 [inline]
rh_urb_enqueue drivers/usb/core/hcd.c:841 [inline]
usb_hcd_submit_urb+0xcaf/0x22d0 drivers/usb/core/hcd.c:1544
usb_submit_urb+0x6e4/0x1540 drivers/usb/core/urb.c:585
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
do_proc_control+0x4af/0x980 drivers/usb/core/devio.c:1165
proc_control drivers/usb/core/devio.c:1191 [inline]
usbdev_do_ioctl drivers/usb/core/devio.c:2535 [inline]
usbdev_ioctl+0x10e2/0x36c0 drivers/usb/core/devio.c:2708
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x443499
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd96535f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004004a0 RCX: 0000000000443499
RDX: 0000000020000000 RSI: 00000000c0185500 RDI: 0000000000000003
RBP: 0000000000403040 R08: 0000000000000000 R09: 00000000004004a0
R10: 000000000000000f R11: 0000000000000246 R12: 00000000004030d0
R13: 0000000000000000 R14: 00000000004b1018 R15: 00000000004004a0
================================================================================
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
syzbot can test patches for this issue, for details see:
https://goo.gl/tpsmEJ#testing-patches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2)
2021-03-24 17:36 [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2) syzbot
@ 2021-03-24 20:05 ` Muhammad Usama Anjum
2021-03-24 20:39 ` Shuah Khan
2021-03-24 21:05 ` syzbot
0 siblings, 2 replies; 4+ messages in thread
From: Muhammad Usama Anjum @ 2021-03-24 20:05 UTC (permalink / raw)
To: syzbot, gregkh, linux-kernel, linux-usb, shuah, syzkaller-bugs,
valentina.manea.m, stern
Cc: musamaanjum
On Wed, 2021-03-24 at 10:36 -0700, syzbot wrote:
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: 84196390 Merge tag 'selinux-pr-20210322' of git://git.kern..
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=12ea778ad00000
> kernel config: https://syzkaller.appspot.com/x/.config?x=5adab0bdee099d7a
> dashboard link: https://syzkaller.appspot.com/bug?extid=3dea30b047f41084de66
> syz repro: https://syzkaller.appspot.com/x/repro.syz?x=15449662d00000
> C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14f81026d00000
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
>
> ================================================================================
> UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
> shift exponent 768 is too large for 32-bit type 'int'
> CPU: 0 PID: 8421 Comm: syz-executor852 Not tainted 5.12.0-rc4-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:79 [inline]
> dump_stack+0x141/0x1d7 lib/dump_stack.c:120
> ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
> __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
> vhci_hub_control.cold+0x20b/0x5f0 drivers/usb/usbip/vhci_hcd.c:605
> rh_call_control drivers/usb/core/hcd.c:683 [inline]
> rh_urb_enqueue drivers/usb/core/hcd.c:841 [inline]
> usb_hcd_submit_urb+0xcaf/0x22d0 drivers/usb/core/hcd.c:1544
> usb_submit_urb+0x6e4/0x1540 drivers/usb/core/urb.c:585
> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
> usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
> usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
> do_proc_control+0x4af/0x980 drivers/usb/core/devio.c:1165
> proc_control drivers/usb/core/devio.c:1191 [inline]
> usbdev_do_ioctl drivers/usb/core/devio.c:2535 [inline]
> usbdev_ioctl+0x10e2/0x36c0 drivers/usb/core/devio.c:2708
> vfs_ioctl fs/ioctl.c:48 [inline]
> __do_sys_ioctl fs/ioctl.c:753 [inline]
> __se_sys_ioctl fs/ioctl.c:739 [inline]
> __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
> do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
> entry_SYSCALL_64_after_hwframe+0x44/0xae
> RIP: 0033:0x443499
> Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007ffd96535f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> RAX: ffffffffffffffda RBX: 00000000004004a0 RCX: 0000000000443499
> RDX: 0000000020000000 RSI: 00000000c0185500 RDI: 0000000000000003
> RBP: 0000000000403040 R08: 0000000000000000 R09: 00000000004004a0
> R10: 000000000000000f R11: 0000000000000246 R12: 00000000004030d0
> R13: 0000000000000000 R14: 00000000004b1018 R15: 00000000004004a0
> ================================================================================
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> syzbot can test patches for this issue, for details see:
> https://goo.gl/tpsmEJ#testing-patches
I've tested with following patch locally and issue is solved.
Porting fix from: c318840fb2 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug")
Lets ask the syzbot to test the patch also.
#syz test: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 84196390
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 3209b5ddd30c..6e12b60d4f5c 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -393,13 +393,24 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
else
vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
break;
- default:
- usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
- wValue);
+ case USB_PORT_FEAT_ENABLE:
+ case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* Not allowed for USB-3 */
+ if (hcd->speed == HCD_USB3)
+ goto error;
+ fallthrough;
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_RESET:
if (wValue >= 32)
goto error;
vhci_hcd->port_status[rhport] &= ~(1 << wValue);
break;
+ default:
+ /* Disallow INDICATOR and C_OVER_CURRENT */
+ usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
+ wValue);
+ goto error;
}
break;
case GetHubDescriptor:
@@ -587,23 +598,22 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* 50msec reset signaling */
vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
fallthrough;
+ case USB_PORT_FEAT_C_CONNECTION:
+ case USB_PORT_FEAT_C_RESET:
+ case USB_PORT_FEAT_C_ENABLE:
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* Not allowed for USB-3, and ignored for USB-2 */
+ if (hcd->speed == HCD_USB3)
+ goto error;
+ break;
default:
+ /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
- if (invalid_rhport) {
+ if (invalid_rhport)
pr_err("invalid port number %d\n", wIndex);
- goto error;
- }
- if (hcd->speed == HCD_USB3) {
- if ((vhci_hcd->port_status[rhport] &
- USB_SS_PORT_STAT_POWER) != 0) {
- vhci_hcd->port_status[rhport] |= (1 << wValue);
- }
- } else
- if ((vhci_hcd->port_status[rhport] &
- USB_PORT_STAT_POWER) != 0) {
- vhci_hcd->port_status[rhport] |= (1 << wValue);
- }
+
+ goto error;
}
break;
case GetPortErrorCount:
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2)
2021-03-24 20:05 ` Muhammad Usama Anjum
@ 2021-03-24 20:39 ` Shuah Khan
2021-03-24 21:05 ` syzbot
1 sibling, 0 replies; 4+ messages in thread
From: Shuah Khan @ 2021-03-24 20:39 UTC (permalink / raw)
To: Muhammad Usama Anjum, syzbot, gregkh, linux-kernel, linux-usb,
shuah, syzkaller-bugs, valentina.manea.m, stern, Shuah Khan
On 3/24/21 2:05 PM, Muhammad Usama Anjum wrote:
> On Wed, 2021-03-24 at 10:36 -0700, syzbot wrote:
>> Hello,
>>
>> syzbot found the following issue on:
>>
>> HEAD commit: 84196390 Merge tag 'selinux-pr-20210322' of git://git.kern..
>> git tree: upstream
>> console output: https://syzkaller.appspot.com/x/log.txt?x=12ea778ad00000
>> kernel config: https://syzkaller.appspot.com/x/.config?x=5adab0bdee099d7a
>> dashboard link: https://syzkaller.appspot.com/bug?extid=3dea30b047f41084de66
>> syz repro: https://syzkaller.appspot.com/x/repro.syz?x=15449662d00000
>> C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14f81026d00000
>>
>> IMPORTANT: if you fix the issue, please add the following tag to the commit:
>> Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
>>
>> ================================================================================
>> UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
>> shift exponent 768 is too large for 32-bit type 'int'
>> CPU: 0 PID: 8421 Comm: syz-executor852 Not tainted 5.12.0-rc4-syzkaller #0
>> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
>> Call Trace:
>> __dump_stack lib/dump_stack.c:79 [inline]
>> dump_stack+0x141/0x1d7 lib/dump_stack.c:120
>> ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
>> __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
>> vhci_hub_control.cold+0x20b/0x5f0 drivers/usb/usbip/vhci_hcd.c:605
>> rh_call_control drivers/usb/core/hcd.c:683 [inline]
>> rh_urb_enqueue drivers/usb/core/hcd.c:841 [inline]
>> usb_hcd_submit_urb+0xcaf/0x22d0 drivers/usb/core/hcd.c:1544
>> usb_submit_urb+0x6e4/0x1540 drivers/usb/core/urb.c:585
>> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
>> usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
>> usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
>> do_proc_control+0x4af/0x980 drivers/usb/core/devio.c:1165
>> proc_control drivers/usb/core/devio.c:1191 [inline]
>> usbdev_do_ioctl drivers/usb/core/devio.c:2535 [inline]
>> usbdev_ioctl+0x10e2/0x36c0 drivers/usb/core/devio.c:2708
>> vfs_ioctl fs/ioctl.c:48 [inline]
>> __do_sys_ioctl fs/ioctl.c:753 [inline]
>> __se_sys_ioctl fs/ioctl.c:739 [inline]
>> __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
>> do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
>> entry_SYSCALL_64_after_hwframe+0x44/0xae
>> RIP: 0033:0x443499
>> Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
>> RSP: 002b:00007ffd96535f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
>> RAX: ffffffffffffffda RBX: 00000000004004a0 RCX: 0000000000443499
>> RDX: 0000000020000000 RSI: 00000000c0185500 RDI: 0000000000000003
>> RBP: 0000000000403040 R08: 0000000000000000 R09: 00000000004004a0
>> R10: 000000000000000f R11: 0000000000000246 R12: 00000000004030d0
>> R13: 0000000000000000 R14: 00000000004b1018 R15: 00000000004004a0
>> ================================================================================
>>
>>
>> ---
>> This report is generated by a bot. It may contain errors.
>> See https://goo.gl/tpsmEJ for more information about syzbot.
>> syzbot engineers can be reached at syzkaller@googlegroups.com.
>>
>> syzbot will keep track of this issue. See:
>> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>> syzbot can test patches for this issue, for details see:
>> https://goo.gl/tpsmEJ#testing-patches
>
> I've tested with following patch locally and issue is solved.
> Porting fix from: c318840fb2 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug")
>
> Lets ask the syzbot to test the patch also.
>
> #syz test: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 84196390
>
> diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
> index 3209b5ddd30c..6e12b60d4f5c 100644
> --- a/drivers/usb/usbip/vhci_hcd.c
> +++ b/drivers/usb/usbip/vhci_hcd.c
> @@ -393,13 +393,24 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
> else
> vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
> break;
> - default:
> - usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
> - wValue);
> + case USB_PORT_FEAT_ENABLE:
> + case USB_PORT_FEAT_C_ENABLE:
> + case USB_PORT_FEAT_C_SUSPEND:
> + /* Not allowed for USB-3 */
> + if (hcd->speed == HCD_USB3)
> + goto error;
> + fallthrough;
> + case USB_PORT_FEAT_C_CONNECTION:
> + case USB_PORT_FEAT_C_RESET:
> if (wValue >= 32)
> goto error;
> vhci_hcd->port_status[rhport] &= ~(1 << wValue);
> break;
> + default:
> + /* Disallow INDICATOR and C_OVER_CURRENT */
> + usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
> + wValue);
> + goto error;
> }
> break;
> case GetHubDescriptor:
> @@ -587,23 +598,22 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
> /* 50msec reset signaling */
> vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
> fallthrough;
> + case USB_PORT_FEAT_C_CONNECTION:
> + case USB_PORT_FEAT_C_RESET:
> + case USB_PORT_FEAT_C_ENABLE:
> + case USB_PORT_FEAT_C_SUSPEND:
> + /* Not allowed for USB-3, and ignored for USB-2 */
> + if (hcd->speed == HCD_USB3)
> + goto error;
> + break;
> default:
> + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
> usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
> wValue);
> - if (invalid_rhport) {
> + if (invalid_rhport)
> pr_err("invalid port number %d\n", wIndex);
> - goto error;
> - }
> - if (hcd->speed == HCD_USB3) {
> - if ((vhci_hcd->port_status[rhport] &
> - USB_SS_PORT_STAT_POWER) != 0) {
> - vhci_hcd->port_status[rhport] |= (1 << wValue);
> - }
> - } else
> - if ((vhci_hcd->port_status[rhport] &
> - USB_PORT_STAT_POWER) != 0) {
> - vhci_hcd->port_status[rhport] |= (1 << wValue);
> - }
This won't work for vhci_hcd. You don't want to get rid of this
USB_SS_PORT_STAT_POWER and USB_PORT_STAT_POWER handling for sure.
The other changes to check for invalid values for USB3 and USB2 are
valid, but I would like to see them in a separate patch.
This bug can be fixed with a two line change to check which is done
for ClearPortFeature in commit 718bf42b119de652ebcc93655a1f33a9c0d04b3c
I hav a patch ready to go to fix this:
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 3209b5ddd30c..a20a8380ca0c 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -594,6 +594,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16
typeReq, u16 wValue,
pr_err("invalid port number %d\n", wIndex);
goto error;
}
+ if (wValue >= 32)
+ goto error;
if (hcd->speed == HCD_USB3) {
if ((vhci_hcd->port_status[rhport] &
USB_SS_PORT_STAT_POWER) != 0) {
--
2.27.0
thanks,
-- Shuah
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2)
2021-03-24 20:05 ` Muhammad Usama Anjum
2021-03-24 20:39 ` Shuah Khan
@ 2021-03-24 21:05 ` syzbot
1 sibling, 0 replies; 4+ messages in thread
From: syzbot @ 2021-03-24 21:05 UTC (permalink / raw)
To: gregkh, linux-kernel, linux-usb, musamaanjum, shuah, stern,
syzkaller-bugs, valentina.manea.m
Hello,
syzbot has tested the proposed patch and the reproducer did not trigger any issue:
Reported-and-tested-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
Tested on:
commit: 84196390 Merge tag 'selinux-pr-20210322' of git://git.kern..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel config: https://syzkaller.appspot.com/x/.config?x=4b6433fa3370faed
dashboard link: https://syzkaller.appspot.com/bug?extid=3dea30b047f41084de66
compiler:
patch: https://syzkaller.appspot.com/x/patch.diff?x=1702d621d00000
Note: testing is done by a robot and is best-effort only.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-24 21:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-24 17:36 [syzbot] UBSAN: shift-out-of-bounds in vhci_hub_control (2) syzbot
2021-03-24 20:05 ` Muhammad Usama Anjum
2021-03-24 20:39 ` Shuah Khan
2021-03-24 21:05 ` syzbot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).