[PATCH] xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).

[PATCH] xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).

[Mathias Nyman]

A second regression was found in the immediate data transfer (IDT)
support which was added to 5.2 kernel

IDT is used to transfer small amounts of data (up to 8 bytes) in the
field normally used for data dma address, thus avoiding dma mapping.

If the data was not already dma mapped, then IDT support assumed data was
in urb->transfer_buffer, and did not take into accound that even
small amounts of data (8 bytes) can be in a scatterlist instead.

This caused a NULL pointer dereference when sg_dma_len() was used
with non-dma mapped data.

Solve this by not using IDT if scatter gather buffer list is used.

Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support")
Cc: <stable@vger.kernel.org> # v5.2
Reported-by: Maik Stohn <maik.stohn@seal-one.com>
Tested-by: Maik Stohn <maik.stohn@seal-one.com>
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7a26496..f5c4144 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2175,7 +2175,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
 	if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
 	    usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
 	    urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
-	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+	    !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
+	    !urb->num_sgs)
 		return true;
 
 	return false;
-- 
2.7.4