From: Thierry Reding <thierry.reding@gmail.com>
To: Nagarjuna Kristam <nkristam@nvidia.com>
Cc: balbi@kernel.org, gregkh@linuxfoundation.org,
jonathanh@nvidia.com, mark.rutland@arm.com, robh+dt@kernel.org,
linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [Patch V3 3/8] phy: tegra: xusb: t210: add vbus override support
Date: Thu, 23 May 2019 12:03:33 +0200 [thread overview]
Message-ID: <20190523100333.GC30331@ulmo> (raw)
In-Reply-To: <1557988772-15406-4-git-send-email-nkristam@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 6809 bytes --]
On Thu, May 16, 2019 at 12:09:27PM +0530, Nagarjuna Kristam wrote:
> Tegra XUSB device control driver needs to control vbus override
> during its operations, add API for the support.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> drivers/phy/tegra/xusb-tegra210.c | 59 +++++++++++++++++++++++++++++++++++++++
> drivers/phy/tegra/xusb.c | 22 +++++++++++++++
> drivers/phy/tegra/xusb.h | 2 ++
> include/linux/phy/tegra/xusb.h | 6 ++--
> 4 files changed, 87 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index 829aca5..363d2aa 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -73,6 +73,10 @@
> #define XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
> #define XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(x) (1 << (8 + (x)))
>
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x080 + (x) * 0x40)
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP (1 << 18)
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN (1 << 22)
> +
> #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
> #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
> #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
> @@ -235,6 +239,12 @@
> #define XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(x) (0xa74 + (x) * 0x40)
> #define XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL 0xfcf01368
>
> +#define XUSB_PADCTL_USB2_VBUS_ID 0xc60
> +#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON (1 << 14)
> +#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT 18
> +#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK 0xf
> +#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
> +
> struct tegra210_xusb_fuse_calibration {
> u32 hs_curr_level[4];
> u32 hs_term_range_adj;
> @@ -2024,6 +2034,53 @@ static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
> .map = tegra210_usb3_port_map,
> };
>
> +static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
> + bool status)
> +{
> + u32 value;
> +
> + dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
> +
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
> +
> + if (status) {
> + value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
> + value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
> + XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
> + value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
> + XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
> + } else
> + value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
> +
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
> +
> + return 0;
> +}
> +
> +static int tegra210_utmi_port_reset(struct phy *phy)
> +{
> + struct tegra_xusb_padctl *padctl;
> + struct tegra_xusb_lane *lane;
> + struct device *dev;
> + u32 value;
> +
> + lane = phy_get_drvdata(phy);
> + padctl = lane->pad->padctl;
> + dev = padctl->dev;
dev seems unused. Is this debugging leftover?
Thierry
> +
> + value = padctl_readl(padctl,
> + XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(0));
> +
> + if ((value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP) ||
> + (value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN)) {
> + tegra210_xusb_padctl_vbus_override(padctl, false);
> + tegra210_xusb_padctl_vbus_override(padctl, true);
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> static int
> tegra210_xusb_read_fuse_calibration(struct tegra210_xusb_fuse_calibration *fuse)
> {
> @@ -2086,6 +2143,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
> .remove = tegra210_xusb_padctl_remove,
> .usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
> .hsic_set_idle = tegra210_hsic_set_idle,
> + .vbus_override = tegra210_xusb_padctl_vbus_override,
> + .utmi_port_reset = tegra210_utmi_port_reset,
> };
>
> const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index 6618db7..e333532 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -1133,6 +1133,28 @@ int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
> }
> EXPORT_SYMBOL_GPL(tegra_xusb_padctl_usb3_set_lfps_detect);
>
> +int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
> + bool val)
> +{
> + if (padctl->soc->ops->vbus_override)
> + return padctl->soc->ops->vbus_override(padctl, val);
> +
> + return -ENOTSUPP;
> +}
> +EXPORT_SYMBOL_GPL(tegra_xusb_padctl_set_vbus_override);
> +
> +int tegra_phy_xusb_utmi_port_reset(struct phy *phy)
> +{
> + struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
> + struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +
> + if (padctl->soc->ops->utmi_port_reset)
> + return padctl->soc->ops->utmi_port_reset(phy);
> +
> + return -ENOTSUPP;
> +}
> +EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_port_reset);
> +
> MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
> MODULE_DESCRIPTION("Tegra XUSB Pad Controller driver");
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 26dd6d2..cb22a70 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -381,6 +381,8 @@ struct tegra_xusb_padctl_ops {
> unsigned int index, bool idle);
> int (*usb3_set_lfps_detect)(struct tegra_xusb_padctl *padctl,
> unsigned int index, bool enable);
> + int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
> + int (*utmi_port_reset)(struct phy *phy);
> };
>
> struct tegra_xusb_padctl_soc {
> diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
> index 8e1a57a..9b8351c 100644
> --- a/include/linux/phy/tegra/xusb.h
> +++ b/include/linux/phy/tegra/xusb.h
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
> + * Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms and conditions of the GNU General Public License,
> @@ -26,5 +26,7 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
> unsigned int port, bool idle);
> int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
> unsigned int port, bool enable);
> -
> +int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
> + bool val);
> +int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
> #endif /* PHY_TEGRA_XUSB_H */
> --
> 2.7.4
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-05-23 10:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-16 6:39 [Patch V3 0/8] Tegra XUSB gadget driver support Nagarjuna Kristam
2019-05-16 6:39 ` [Patch V3 1/8] phy: tegra: xusb: t210: add XUSB dual mode support Nagarjuna Kristam
2019-05-21 2:16 ` jckuo
2019-05-23 9:39 ` Thierry Reding
2019-05-16 6:39 ` [Patch V3 2/8] phy: tegra: xusb: t210: add usb3 port fake support Nagarjuna Kristam
2019-05-21 3:00 ` jckuo
2019-05-23 11:16 ` Nagarjuna Kristam
2019-05-23 10:01 ` Thierry Reding
2019-05-23 11:24 ` Nagarjuna Kristam
2019-05-16 6:39 ` [Patch V3 3/8] phy: tegra: xusb: t210: add vbus override support Nagarjuna Kristam
2019-05-21 4:34 ` jckuo
2019-05-23 11:15 ` Nagarjuna Kristam
2019-05-23 10:03 ` Thierry Reding [this message]
2019-05-23 11:13 ` Nagarjuna Kristam
2019-05-16 6:39 ` [Patch V3 4/8] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding Nagarjuna Kristam
2019-05-21 6:08 ` JC Kuo
2019-05-23 10:13 ` Thierry Reding
2019-05-23 11:41 ` Nagarjuna Kristam
2019-06-13 21:32 ` Rob Herring
2019-06-18 6:18 ` Nagarjuna Kristam
2019-05-16 6:39 ` [Patch V3 5/8] arm64: tegra: Add xudc node for Tegra210 Nagarjuna Kristam
2019-05-21 6:08 ` JC Kuo
2019-05-23 10:15 ` Thierry Reding
2019-05-16 6:39 ` [Patch V3 6/8] arm64: tegra: Enable xudc on Jetson TX1 Nagarjuna Kristam
2019-05-21 6:11 ` JC Kuo
2019-05-16 6:39 ` [Patch V3 7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller Nagarjuna Kristam
2019-05-16 9:08 ` Chunfeng Yun
2019-05-24 6:50 ` Nagarjuna Kristam
2019-05-29 8:06 ` Chunfeng Yun
2019-05-23 10:26 ` Thierry Reding
2019-05-23 10:28 ` Thierry Reding
2019-05-16 6:39 ` [Patch V3 8/8] arm64: defconfig: Enable tegra XUDC driver Nagarjuna Kristam
2019-05-23 10:30 ` Thierry Reding
2019-05-24 8:01 ` Nagarjuna Kristam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190523100333.GC30331@ulmo \
--to=thierry.reding@gmail.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nkristam@nvidia.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).