linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support
@ 2019-06-07 16:34 Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 1/5] i2c: nvidia-gpu: refactor master_xfer Ajay Gupta
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

Hi Heikki and Wolfram
The latest set (v5) fix comments from Wolfram on further refactoring
master_xfer() function in i2c-nvidia-gpuc.c file and removing extra comments
in patch 2/5.

Patches can go through either usb or i2c tree but since there are 3 out of 5
patches from i2c so may be better they go through i2c. They all should go
together.

Thanks
Ajay

---- v4
These patches add support for runtime power management for UCSI CCGx driver.
I have tested them with NVIDIA GPU card which has i2c interface to talk to
CCG controller. I have added runtime pm support for the i2c bus driver as well.

Fourth version (v4) of patches fix comments from Wolfram on further refactoring
master_xfer() function in i2c-nvidia-gpuc.c file. Also I have added comment on
why we need a stub gpu_i2c_suspend() for runtime pm to work correctly.

First patch refactors master_xfer() of i2c driver fixing comment from Wolfram.
Second and third patch add support for runtime pm in i2c bus driver and UCSI CCGx
driver.

Last two patches add workaround for an old version of ccg firmware
which has known issue of missing interrupt when a device is connected
to runtime resume the ccg controller. The workaround is needed because
if a GPU card doesn't get new firmware but gets new kernel then also it
should continue to work. The workaround is to request runtime resume of
i2c client which is UCSI Cypress CCGx driver. CCG driver will call the ISR
for any connector change event only if NVIDIA GPU has old CCG firmware with
the known issue.

All the five patches should go together since ucsi_ccg driver is dependent
on i2c driver for runtime pm wokaround. I would prefer it to go through
usb-tree since usb ucsi_ccg driver is the main driver getting runtime pm
functionality with the series.

Thanks
Ajay


Ajay Gupta (5):
  i2c: nvidia-gpu: refactor master_xfer
  i2c: nvidia-gpu: add runtime pm support
  usb: typec: ucsi: ccg: enable runtime pm support
  i2c: nvidia-gpu: resume ccgx i2c client
  usb: typec: ucsi: ccg: add runtime pm workaround

 drivers/i2c/busses/i2c-nvidia-gpu.c |  64 +++++++++++----
 drivers/usb/typec/ucsi/ucsi.c       |  10 +++
 drivers/usb/typec/ucsi/ucsi.h       |   1 +
 drivers/usb/typec/ucsi/ucsi_ccg.c   | 118 +++++++++++++++++++++++++++-
 4 files changed, 172 insertions(+), 21 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v5 1/5] i2c: nvidia-gpu: refactor master_xfer
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
@ 2019-06-07 16:34 ` Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 2/5] i2c: nvidia-gpu: add runtime pm support Ajay Gupta
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

From: Ajay Gupta <ajayg@nvidia.com>

Added a local variable "send_stop" to simplify "goto" statements.

The "send_stop" handles below two case
1) When first i2c start fails and so i2c stop is not sent before
exiting

2) When i2c stop failed after all transfers and we do not need to
send another stop before exiting.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
Changes from v4->v5:
	- Further refactor master_xfer based on Wolfram's comment.

 drivers/i2c/busses/i2c-nvidia-gpu.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 1c8f708f212b..7678a460bf9a 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -169,6 +169,7 @@ static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
 {
 	struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
 	int status, status2;
+	bool send_stop = true;
 	int i, j;
 
 	/*
@@ -182,37 +183,40 @@ static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
 			/* gpu_i2c_read has implicit start */
 			status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
 			if (status < 0)
-				goto stop;
+				goto exit;
 		} else {
 			u8 addr = i2c_8bit_addr_from_msg(msgs + i);
 
 			status = gpu_i2c_start(i2cd);
 			if (status < 0) {
 				if (i == 0)
-					return status;
-				goto stop;
+					send_stop = false;
+				goto exit;
 			}
 
 			status = gpu_i2c_write(i2cd, addr);
 			if (status < 0)
-				goto stop;
+				goto exit;
 
 			for (j = 0; j < msgs[i].len; j++) {
 				status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
 				if (status < 0)
-					goto stop;
+					goto exit;
 			}
 		}
 	}
+	send_stop = false;
 	status = gpu_i2c_stop(i2cd);
 	if (status < 0)
-		return status;
-
-	return i;
-stop:
-	status2 = gpu_i2c_stop(i2cd);
-	if (status2 < 0)
-		dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
+		goto exit;
+
+	status = i;
+exit:
+	if (send_stop) {
+		status2 = gpu_i2c_stop(i2cd);
+		if (status2 < 0)
+			dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
+	}
 	return status;
 }
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v5 2/5] i2c: nvidia-gpu: add runtime pm support
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 1/5] i2c: nvidia-gpu: refactor master_xfer Ajay Gupta
@ 2019-06-07 16:34 ` Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 3/5] usb: typec: ucsi: ccg: enable " Ajay Gupta
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

From: Ajay Gupta <ajayg@nvidia.com>

Enable runtime pm support with autosuspend delay of three second.
This is to make sure I2C client device Cypress CCGx has completed
all transaction.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
Changes from v4->v5:
	- Removed extra comments for gpu_i2c_suspend() based on
	Wolfram's comment.

 drivers/i2c/busses/i2c-nvidia-gpu.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 7678a460bf9a..364244ffb5bf 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -176,6 +176,7 @@ static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
 	 * The controller supports maximum 4 byte read due to known
 	 * limitation of sending STOP after every read.
 	 */
+	pm_runtime_get_sync(i2cd->dev);
 	for (i = 0; i < num; i++) {
 		if (msgs[i].flags & I2C_M_RD) {
 			/* program client address before starting read */
@@ -217,6 +218,8 @@ static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
 		if (status2 < 0)
 			dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
 	}
+	pm_runtime_mark_last_busy(i2cd->dev);
+	pm_runtime_put_autosuspend(i2cd->dev);
 	return status;
 }
 
@@ -336,6 +339,11 @@ static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto del_adapter;
 	}
 
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 3000);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
 	return 0;
 
 del_adapter:
@@ -349,10 +357,21 @@ static void gpu_i2c_remove(struct pci_dev *pdev)
 {
 	struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
 
+	pm_runtime_get_noresume(i2cd->dev);
 	i2c_del_adapter(&i2cd->adapter);
 	pci_free_irq_vectors(pdev);
 }
 
+/*
+ * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work
+ * correctly. Without it, lspci shows runtime pm status as "D0" for the card.
+ * Documentation/power/pci.txt also insists for driver to provide this.
+ */
+static __maybe_unused int gpu_i2c_suspend(struct device *dev)
+{
+	return 0;
+}
+
 static __maybe_unused int gpu_i2c_resume(struct device *dev)
 {
 	struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
@@ -361,7 +380,8 @@ static __maybe_unused int gpu_i2c_resume(struct device *dev)
 	return 0;
 }
 
-static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL);
+static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, gpu_i2c_suspend, gpu_i2c_resume,
+			    NULL);
 
 static struct pci_driver gpu_i2c_driver = {
 	.name		= "nvidia-gpu",
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v5 3/5] usb: typec: ucsi: ccg: enable runtime pm support
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 1/5] i2c: nvidia-gpu: refactor master_xfer Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 2/5] i2c: nvidia-gpu: add runtime pm support Ajay Gupta
@ 2019-06-07 16:34 ` Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 4/5] i2c: nvidia-gpu: resume ccgx i2c client Ajay Gupta
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

From: Ajay Gupta <ajayg@nvidia.com>

The change enables runtime pm support to UCSI CCG driver.
Added ucsi_resume() function to enable notification after
system reusme. Exported both ucsi_resume() and ucsi_send_command()
symbols in ucsi.c for modular build.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
Changes from v4->v5 : None

 drivers/usb/typec/ucsi/ucsi.c     | 10 ++++++++
 drivers/usb/typec/ucsi/ucsi.h     |  1 +
 drivers/usb/typec/ucsi/ucsi_ccg.c | 38 +++++++++++++++++++++++++++++++
 3 files changed, 49 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 7850b851cecd..ba288b964dc8 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -206,7 +206,17 @@ int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ucsi_send_command);
 
+int ucsi_resume(struct ucsi *ucsi)
+{
+	struct ucsi_control ctrl;
+
+	/* Restore UCSI notification enable mask after system resume */
+	UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_ALL);
+	return ucsi_send_command(ucsi, &ctrl, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(ucsi_resume);
 /* -------------------------------------------------------------------------- */
 
 void ucsi_altmode_update_active(struct ucsi_connector *con)
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 1e2981aef629..de87d0b8319d 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -430,6 +430,7 @@ int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
 		      void *retval, size_t size);
 
 void ucsi_altmode_update_active(struct ucsi_connector *con);
+int ucsi_resume(struct ucsi *ucsi);
 
 #if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
 struct typec_altmode *
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 9d46aa9e4e35..b15bc6c29c46 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -14,6 +14,8 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/unaligned.h>
 #include "ucsi.h"
@@ -210,6 +212,7 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 	if (quirks && quirks->max_read_len)
 		max_read_len = quirks->max_read_len;
 
+	pm_runtime_get_sync(uc->dev);
 	while (rem_len > 0) {
 		msgs[1].buf = &data[len - rem_len];
 		rlen = min_t(u16, rem_len, max_read_len);
@@ -218,12 +221,14 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 		status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 		if (status < 0) {
 			dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+			pm_runtime_put_sync(uc->dev);
 			return status;
 		}
 		rab += rlen;
 		rem_len -= rlen;
 	}
 
+	pm_runtime_put_sync(uc->dev);
 	return 0;
 }
 
@@ -249,13 +254,16 @@ static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 	msgs[0].len = len + sizeof(rab);
 	msgs[0].buf = buf;
 
+	pm_runtime_get_sync(uc->dev);
 	status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 	if (status < 0) {
 		dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+		pm_runtime_put_sync(uc->dev);
 		kfree(buf);
 		return status;
 	}
 
+	pm_runtime_put_sync(uc->dev);
 	kfree(buf);
 	return 0;
 }
@@ -1134,6 +1142,10 @@ static int ucsi_ccg_probe(struct i2c_client *client,
 	if (status)
 		dev_err(uc->dev, "cannot create sysfs group: %d\n", status);
 
+	pm_runtime_set_active(uc->dev);
+	pm_runtime_enable(uc->dev);
+	pm_runtime_idle(uc->dev);
+
 	return 0;
 }
 
@@ -1143,6 +1155,7 @@ static int ucsi_ccg_remove(struct i2c_client *client)
 
 	cancel_work_sync(&uc->work);
 	ucsi_unregister_ppm(uc->ucsi);
+	pm_runtime_disable(uc->dev);
 	free_irq(uc->irq, uc);
 	sysfs_remove_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
 
@@ -1155,9 +1168,34 @@ static const struct i2c_device_id ucsi_ccg_device_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id);
 
+static int ucsi_ccg_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+	return ucsi_resume(uc->ucsi);
+}
+
+static int ucsi_ccg_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int ucsi_ccg_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops ucsi_ccg_pm = {
+	.resume = ucsi_ccg_resume,
+	.runtime_suspend = ucsi_ccg_runtime_suspend,
+	.runtime_resume = ucsi_ccg_runtime_resume,
+};
+
 static struct i2c_driver ucsi_ccg_driver = {
 	.driver = {
 		.name = "ucsi_ccg",
+		.pm = &ucsi_ccg_pm,
 	},
 	.probe = ucsi_ccg_probe,
 	.remove = ucsi_ccg_remove,
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v5 4/5] i2c: nvidia-gpu: resume ccgx i2c client
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
                   ` (2 preceding siblings ...)
  2019-06-07 16:34 ` [PATCH v5 3/5] usb: typec: ucsi: ccg: enable " Ajay Gupta
@ 2019-06-07 16:34 ` Ajay Gupta
  2019-06-07 16:34 ` [PATCH v5 5/5] usb: typec: ucsi: ccg: add runtime pm workaround Ajay Gupta
  2019-06-07 22:10 ` [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Wolfram Sang
  5 siblings, 0 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

From: Ajay Gupta <ajayg@nvidia.com>

Cypress USB Type-C CCGx controller firmware version 3.1.10
(which is being used in many NVIDIA GPU cards) has known issue of
not triggering interrupt when a USB device is hot plugged to runtime
resume the controller. If any GPU card gets latest kernel with runtime
pm support but does not get latest fixed firmware then also it should
continue to work and therefore a workaround is required to check for
any connector change event

The workaround is to request runtime resume of i2c client
which is UCSI Cypress CCGx driver. CCG driver will call the ISR
for any connector change event only if NVIDIA GPU has old
CCG firmware with the known issue.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
Changes from v4->v5: None

 drivers/i2c/busses/i2c-nvidia-gpu.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 364244ffb5bf..cfc76b5de726 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -51,6 +51,7 @@ struct gpu_i2c_dev {
 	void __iomem *regs;
 	struct i2c_adapter adapter;
 	struct i2c_board_info *gpu_ccgx_ucsi;
+	struct i2c_client *ccgx_client;
 };
 
 static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
@@ -268,8 +269,6 @@ static const struct property_entry ccgx_props[] = {
 
 static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
 {
-	struct i2c_client *ccgx_client;
-
 	i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
 					   sizeof(*i2cd->gpu_ccgx_ucsi),
 					   GFP_KERNEL);
@@ -281,8 +280,8 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
 	i2cd->gpu_ccgx_ucsi->addr = 0x8;
 	i2cd->gpu_ccgx_ucsi->irq = irq;
 	i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
-	ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
-	if (!ccgx_client)
+	i2cd->ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
+	if (!i2cd->ccgx_client)
 		return -ENODEV;
 
 	return 0;
@@ -377,6 +376,13 @@ static __maybe_unused int gpu_i2c_resume(struct device *dev)
 	struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
 
 	gpu_enable_i2c_bus(i2cd);
+	/*
+	 * Runtime resume ccgx client so that it can see for any
+	 * connector change event. Old ccg firmware has known
+	 * issue of not triggering interrupt when a device is
+	 * connected to runtime resume the controller.
+	 */
+	pm_request_resume(&i2cd->ccgx_client->dev);
 	return 0;
 }
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v5 5/5] usb: typec: ucsi: ccg: add runtime pm workaround
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
                   ` (3 preceding siblings ...)
  2019-06-07 16:34 ` [PATCH v5 4/5] i2c: nvidia-gpu: resume ccgx i2c client Ajay Gupta
@ 2019-06-07 16:34 ` Ajay Gupta
  2019-06-07 22:10 ` [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Wolfram Sang
  5 siblings, 0 replies; 7+ messages in thread
From: Ajay Gupta @ 2019-06-07 16:34 UTC (permalink / raw)
  To: heikki.krogerus, wsa; +Cc: linux-usb, linux-i2c, Ajay Gupta

From: Ajay Gupta <ajayg@nvidia.com>

Cypress USB Type-C CCGx controller firmware version 3.1.10
(which is being used in many NVIDIA GPU cards) has known issue of
not triggering interrupt when a USB device is hot plugged to runtime
resume the controller. If any GPU card gets latest kernel with runtime
pm support but does not get latest fixed firmware then also it should
continue to work and therefore a workaround is required to check for
any connector change event.

The workaround is that i2c bus driver will call pm_request_resume()
to runtime resume ucsi_ccg driver. CCG driver will call the ISR
for any connector change event for NVIDIA GPU card and only if it has
old CCG firmware with the known issue.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
Changes from v4->v5: None

 drivers/usb/typec/ucsi/ucsi_ccg.c | 80 +++++++++++++++++++++++++++++--
 1 file changed, 76 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index b15bc6c29c46..a5b81c011148 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -109,12 +109,21 @@ struct version_format {
 	__le16 build;
 	u8 patch;
 	u8 ver;
+#define CCG_VERSION_PATCH(x) ((x) << 16)
+#define CCG_VERSION(x)	((x) << 24)
 #define CCG_VERSION_MIN_SHIFT (0)
 #define CCG_VERSION_MIN_MASK (0xf << CCG_VERSION_MIN_SHIFT)
 #define CCG_VERSION_MAJ_SHIFT (4)
 #define CCG_VERSION_MAJ_MASK (0xf << CCG_VERSION_MAJ_SHIFT)
 } __packed;
 
+/*
+ * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue
+ * of missing interrupt when a device is connected for runtime resume
+ */
+#define CCG_FW_BUILD_NVIDIA	(('n' << 8) | 'v')
+#define CCG_OLD_FW_VERSION	(CCG_VERSION(0x31) | CCG_VERSION_PATCH(10))
+
 struct version_info {
 	struct version_format base;
 	struct version_format app;
@@ -172,6 +181,7 @@ struct ucsi_ccg {
 	struct ccg_dev_info info;
 	/* version info for boot, primary and secondary */
 	struct version_info version[FW2 + 1];
+	u32 fw_version;
 	/* CCG HPI communication flags */
 	unsigned long flags;
 #define RESET_PENDING	0
@@ -185,6 +195,8 @@ struct ucsi_ccg {
 
 	/* fw build with vendor information */
 	u16 fw_build;
+	bool run_isr; /* flag to call ISR routine during resume */
+	struct work_struct pm_work;
 };
 
 static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
@@ -212,6 +224,18 @@ static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 	if (quirks && quirks->max_read_len)
 		max_read_len = quirks->max_read_len;
 
+	if (uc->fw_build == CCG_FW_BUILD_NVIDIA &&
+	    uc->fw_version <= CCG_OLD_FW_VERSION) {
+		mutex_lock(&uc->lock);
+		/*
+		 * Do not schedule pm_work to run ISR in
+		 * ucsi_ccg_runtime_resume() after pm_runtime_get_sync()
+		 * since we are already in ISR path.
+		 */
+		uc->run_isr = false;
+		mutex_unlock(&uc->lock);
+	}
+
 	pm_runtime_get_sync(uc->dev);
 	while (rem_len > 0) {
 		msgs[1].buf = &data[len - rem_len];
@@ -254,6 +278,18 @@ static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
 	msgs[0].len = len + sizeof(rab);
 	msgs[0].buf = buf;
 
+	if (uc->fw_build == CCG_FW_BUILD_NVIDIA &&
+	    uc->fw_version <= CCG_OLD_FW_VERSION) {
+		mutex_lock(&uc->lock);
+		/*
+		 * Do not schedule pm_work to run ISR in
+		 * ucsi_ccg_runtime_resume() after pm_runtime_get_sync()
+		 * since we are already in ISR path.
+		 */
+		uc->run_isr = false;
+		mutex_unlock(&uc->lock);
+	}
+
 	pm_runtime_get_sync(uc->dev);
 	status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 	if (status < 0) {
@@ -383,6 +419,13 @@ static irqreturn_t ccg_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static void ccg_pm_workaround_work(struct work_struct *pm_work)
+{
+	struct ucsi_ccg *uc = container_of(pm_work, struct ucsi_ccg, pm_work);
+
+	ucsi_notify(uc->ucsi);
+}
+
 static int get_fw_info(struct ucsi_ccg *uc)
 {
 	int err;
@@ -392,6 +435,9 @@ static int get_fw_info(struct ucsi_ccg *uc)
 	if (err < 0)
 		return err;
 
+	uc->fw_version = CCG_VERSION(uc->version[FW2].app.ver) |
+			CCG_VERSION_PATCH(uc->version[FW2].app.patch);
+
 	err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
 		       sizeof(uc->info));
 	if (err < 0)
@@ -740,11 +786,12 @@ static bool ccg_check_fw_version(struct ucsi_ccg *uc, const char *fw_name,
 	}
 
 	/* compare input version with FWCT version */
-	cur_version = le16_to_cpu(app->build) | app->patch << 16 |
-			app->ver << 24;
+	cur_version = le16_to_cpu(app->build) | CCG_VERSION_PATCH(app->patch) |
+			CCG_VERSION(app->ver);
 
-	new_version = le16_to_cpu(fw_cfg.app.build) | fw_cfg.app.patch << 16 |
-			fw_cfg.app.ver << 24;
+	new_version = le16_to_cpu(fw_cfg.app.build) |
+			CCG_VERSION_PATCH(fw_cfg.app.patch) |
+			CCG_VERSION(fw_cfg.app.ver);
 
 	if (!ccg_check_vendor_version(uc, app, &fw_cfg))
 		goto out_release_firmware;
@@ -1084,8 +1131,10 @@ static int ucsi_ccg_probe(struct i2c_client *client,
 	uc->ppm.sync = ucsi_ccg_sync;
 	uc->dev = dev;
 	uc->client = client;
+	uc->run_isr = true;
 	mutex_init(&uc->lock);
 	INIT_WORK(&uc->work, ccg_update_firmware);
+	INIT_WORK(&uc->pm_work, ccg_pm_workaround_work);
 
 	/* Only fail FW flashing when FW build information is not provided */
 	status = device_property_read_u16(dev, "ccgx,firmware-build",
@@ -1153,6 +1202,7 @@ static int ucsi_ccg_remove(struct i2c_client *client)
 {
 	struct ucsi_ccg *uc = i2c_get_clientdata(client);
 
+	cancel_work_sync(&uc->pm_work);
 	cancel_work_sync(&uc->work);
 	ucsi_unregister_ppm(uc->ucsi);
 	pm_runtime_disable(uc->dev);
@@ -1183,6 +1233,28 @@ static int ucsi_ccg_runtime_suspend(struct device *dev)
 
 static int ucsi_ccg_runtime_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ucsi_ccg *uc = i2c_get_clientdata(client);
+	bool schedule = true;
+
+	/*
+	 * Firmware version 3.1.10 or earlier, built for NVIDIA has known issue
+	 * of missing interrupt when a device is connected for runtime resume.
+	 * Schedule a work to call ISR as a workaround.
+	 */
+	if (uc->fw_build == CCG_FW_BUILD_NVIDIA &&
+	    uc->fw_version <= CCG_OLD_FW_VERSION) {
+		mutex_lock(&uc->lock);
+		if (!uc->run_isr) {
+			uc->run_isr = true;
+			schedule = false;
+		}
+		mutex_unlock(&uc->lock);
+
+		if (schedule)
+			schedule_work(&uc->pm_work);
+	}
+
 	return 0;
 }
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support
  2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
                   ` (4 preceding siblings ...)
  2019-06-07 16:34 ` [PATCH v5 5/5] usb: typec: ucsi: ccg: add runtime pm workaround Ajay Gupta
@ 2019-06-07 22:10 ` Wolfram Sang
  5 siblings, 0 replies; 7+ messages in thread
From: Wolfram Sang @ 2019-06-07 22:10 UTC (permalink / raw)
  To: Ajay Gupta; +Cc: heikki.krogerus, linux-usb, linux-i2c, Ajay Gupta

[-- Attachment #1: Type: text/plain, Size: 500 bytes --]

On Fri, Jun 07, 2019 at 09:34:18AM -0700, Ajay Gupta wrote:
> Hi Heikki and Wolfram
> The latest set (v5) fix comments from Wolfram on further refactoring
> master_xfer() function in i2c-nvidia-gpuc.c file and removing extra comments
> in patch 2/5.
> 
> Patches can go through either usb or i2c tree but since there are 3 out of 5
> patches from i2c so may be better they go through i2c. They all should go
> together.
> 
> Thanks
> Ajay

Applied the series to i2c/for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-06-07 22:10 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-07 16:34 [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Ajay Gupta
2019-06-07 16:34 ` [PATCH v5 1/5] i2c: nvidia-gpu: refactor master_xfer Ajay Gupta
2019-06-07 16:34 ` [PATCH v5 2/5] i2c: nvidia-gpu: add runtime pm support Ajay Gupta
2019-06-07 16:34 ` [PATCH v5 3/5] usb: typec: ucsi: ccg: enable " Ajay Gupta
2019-06-07 16:34 ` [PATCH v5 4/5] i2c: nvidia-gpu: resume ccgx i2c client Ajay Gupta
2019-06-07 16:34 ` [PATCH v5 5/5] usb: typec: ucsi: ccg: add runtime pm workaround Ajay Gupta
2019-06-07 22:10 ` [PATCH v5 0/5] usb: typec: ucsi: ccg: add runtime pm support Wolfram Sang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).