[PATCH V3 15/15] NCR5380: Support chained sg lists

[Ming Lei <ming.lei@redhat.com>]

From: Finn Thain <fthain@telegraphics.com.au>

My understanding is that support for chained scatterlists is to
become mandatory for LLDs.

Use the scatterlist iterators and remove direct indexing of the
scatterlist array.

This way allows us to pre-allocate one small scatterlist, which can be
chained with one runtime allocated scatterlist if the pre-allocated one
isn't enough for the whole request.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
 drivers/scsi/NCR5380.c | 41 ++++++++++++++++++-----------------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index fe0535affc14..4ef44fafe6ca 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -149,12 +149,10 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
 
 	if (scsi_bufflen(cmd)) {
 		cmd->SCp.buffer = scsi_sglist(cmd);
-		cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
 		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
 		cmd->SCp.this_residual = cmd->SCp.buffer->length;
 	} else {
 		cmd->SCp.buffer = NULL;
-		cmd->SCp.buffers_residual = 0;
 		cmd->SCp.ptr = NULL;
 		cmd->SCp.this_residual = 0;
 	}
@@ -163,6 +161,17 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
 	cmd->SCp.Message = 0;
 }
 
+static inline void advance_sg_buffer(struct scsi_cmnd *cmd)
+{
+	struct scatterlist *s = cmd->SCp.buffer;
+
+	if (!cmd->SCp.this_residual && s && !sg_is_last(s)) {
+		cmd->SCp.buffer = sg_next(s);
+		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+	}
+}
+
 /**
  * NCR5380_poll_politely2 - wait for two chip register values
  * @hostdata: host private data
@@ -1672,12 +1681,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 			    sun3_dma_setup_done != cmd) {
 				int count;
 
-				if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
-					++cmd->SCp.buffer;
-					--cmd->SCp.buffers_residual;
-					cmd->SCp.this_residual = cmd->SCp.buffer->length;
-					cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-				}
+				advance_sg_buffer(cmd);
 
 				count = sun3scsi_dma_xfer_len(hostdata, cmd);
 
@@ -1727,15 +1731,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				 * scatter-gather list, move onto the next one.
 				 */
 
-				if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
-					++cmd->SCp.buffer;
-					--cmd->SCp.buffers_residual;
-					cmd->SCp.this_residual = cmd->SCp.buffer->length;
-					cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-					dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
-					         cmd->SCp.this_residual,
-					         cmd->SCp.buffers_residual);
-				}
+				advance_sg_buffer(cmd);
+				dsprintk(NDEBUG_INFORMATION, instance,
+					"this residual %d, sg ents %d\n",
+					cmd->SCp.this_residual,
+					sg_nents(cmd->SCp.buffer));
 
 				/*
 				 * The preferred transfer method is going to be
@@ -2136,12 +2136,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 	if (sun3_dma_setup_done != tmp) {
 		int count;
 
-		if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
-			++tmp->SCp.buffer;
-			--tmp->SCp.buffers_residual;
-			tmp->SCp.this_residual = tmp->SCp.buffer->length;
-			tmp->SCp.ptr = sg_virt(tmp->SCp.buffer);
-		}
+		advance_sg_buffer(tmp);
 
 		count = sun3scsi_dma_xfer_len(hostdata, tmp);
 
-- 
2.20.1