[PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c

[PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c

[Arnd Bergmann]

The mach/memory.h file only exists to implement a dma offset for "Local
Bus" devices, and that consists of the OHCI USB controller for practical
purposes.

The generic dma-mapping interface has gained this exact feature some
years ago and can do it much more efficiently, so replace the complex
__arch_virt_to_dma/__arch_dma_to_pfn/... logic with a much simpler boot
time initialization.

This should also make any code that performs dma mapping calls at
runtime much more efficient, by eliminating the strcmp() along with
the computation.

Similar, a portion of the ohci-omap driver is just there for configuring
the memory translation, this too can get moved into usb.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/include/mach/memory.h   | 43 -----------
 arch/arm/mach-omap1/include/mach/omap1510.h |  1 -
 arch/arm/mach-omap1/usb.c                   | 79 +++++++++++++++++++++
 drivers/usb/host/ohci-omap.c                | 72 +------------------
 include/linux/platform_data/usb-omap1.h     |  2 +
 5 files changed, 83 insertions(+), 114 deletions(-)

diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 1142560e0078..ba3a350479c8 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -9,47 +9,4 @@
 /* REVISIT: omap1 legacy drivers still rely on this */
 #include <mach/soc.h>
 
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)	\
-	({ dma_addr_t __dma = addr;				\
-	   if (is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
 #endif
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 3d235244bf5c..7af9c0c7c5ab 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -159,4 +159,3 @@
 #define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
 
 #endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index d8e9bbda8f7b..740c876ae46b 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 
@@ -127,6 +128,7 @@ omap_otg_init(struct omap_usb_config *config)
 
 		syscon &= ~HST_IDLE_EN;
 		ohci_device->dev.platform_data = config;
+
 		status = platform_device_register(ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -533,6 +535,80 @@ static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 }
 
 #ifdef	CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
+#define OMAP1510_LB_MMU_CTL	0xfffec208
+#define OMAP1510_LB_MMU_LCK	0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
+#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L	0xfffec230
+#define OMAP1510_LB_MMU_RAM_H	0xfffec234
+#define OMAP1510_LB_MMU_RAM_L	0xfffec238
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET	   UL(0x30000000)
+#define OMAP1510_LB_DMA_PFN_OFFSET ((OMAP1510_LB_OFFSET - PAGE_OFFSET) >> PAGE_SHIFT)
+
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+	if (on) {
+		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+		udelay(200);
+	} else {
+		omap_writel(0, OMAP1510_LB_MMU_CTL);
+	}
+
+	return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
+ *       Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
+{
+	unsigned int tlb;
+	unsigned long lbaddr, physaddr;
+
+	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+	       OMAP1510_LB_CLOCK_DIV);
+
+	/* Configure the Local Bus MMU table */
+	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+		       OMAP1510_LB_MMU_CAM_L);
+		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+	}
+
+	/* Enable the walking table */
+	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+	udelay(200);
+
+	return 0;
+}
+
+static void omap_1510_local_bus_reset(void)
+{
+	omap_1510_local_bus_power(1);
+	omap_1510_local_bus_init();
+}
 
 /* ULPD_DPLL_CTRL */
 #define DPLL_IOB		(1 << 13)
@@ -601,11 +677,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 		int status;
 
 		ohci_device.dev.platform_data = config;
+		ohci_device.dev.dma_pfn_offset = OMAP1510_LB_DMA_PFN_OFFSET;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 		/* hcd explicitly gates 48MHz */
 	}
+
+	config->lb_reset = omap_1510_local_bus_reset;
 #endif
 }
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index d8d35d456456..f7efe65f01c5 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -40,17 +40,6 @@
 #include <mach/usb.h>
 
 
-/* OMAP-1510 OHCI has its own MMU for DMA */
-#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
-#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
-#define OMAP1510_LB_MMU_CTL	0xfffec208
-#define OMAP1510_LB_MMU_LCK	0xfffec224
-#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
-#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
-#define OMAP1510_LB_MMU_CAM_L	0xfffec230
-#define OMAP1510_LB_MMU_RAM_H	0xfffec234
-#define OMAP1510_LB_MMU_RAM_L	0xfffec238
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
 #ifdef CONFIG_TPS65010
@@ -113,61 +102,6 @@ static int omap_ohci_transceiver_power(int on)
 	return 0;
 }
 
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * OMAP-1510 specific Local Bus clock on/off
- */
-static int omap_1510_local_bus_power(int on)
-{
-	if (on) {
-		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
-		udelay(200);
-	} else {
-		omap_writel(0, OMAP1510_LB_MMU_CTL);
-	}
-
-	return 0;
-}
-
-/*
- * OMAP-1510 specific Local Bus initialization
- * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and
- *       __dma_to_virt() which need to match with the physical
- *       Local Bus address below.
- */
-static int omap_1510_local_bus_init(void)
-{
-	unsigned int tlb;
-	unsigned long lbaddr, physaddr;
-
-	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
-	       OMAP1510_LB_CLOCK_DIV);
-
-	/* Configure the Local Bus MMU table */
-	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
-		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
-		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
-		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
-		       OMAP1510_LB_MMU_CAM_L);
-		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
-		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
-		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
-		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
-	}
-
-	/* Enable the walking table */
-	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
-	udelay(200);
-
-	return 0;
-}
-#else
-#define omap_1510_local_bus_power(x)	{}
-#define omap_1510_local_bus_init()	{}
-#endif
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -237,10 +171,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 
 	omap_ohci_clock_power(1);
 
-	if (cpu_is_omap15xx()) {
-		omap_1510_local_bus_power(1);
-		omap_1510_local_bus_init();
-	}
+	if (config->lb_reset)
+		config->lb_reset();
 
 	ret = ohci_setup(hcd);
 	if (ret < 0)
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
index 43b5ce139c37..878e572a78bf 100644
--- a/include/linux/platform_data/usb-omap1.h
+++ b/include/linux/platform_data/usb-omap1.h
@@ -48,6 +48,8 @@ struct omap_usb_config {
 	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
 
 	int (*ocpi_enable)(void);
+
+	void (*lb_reset)(void);
 };
 
 #endif /* __LINUX_USB_OMAP1_H */
-- 
2.20.0

Re: [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c

[Felipe Balbi]

Arnd Bergmann <arnd@arndb.de> writes:

> The mach/memory.h file only exists to implement a dma offset for "Local
> Bus" devices, and that consists of the OHCI USB controller for practical
> purposes.
>
> The generic dma-mapping interface has gained this exact feature some
> years ago and can do it much more efficiently, so replace the complex
> __arch_virt_to_dma/__arch_dma_to_pfn/... logic with a much simpler boot
> time initialization.
>
> This should also make any code that performs dma mapping calls at
> runtime much more efficient, by eliminating the strcmp() along with
> the computation.
>
> Similar, a portion of the ohci-omap driver is just there for configuring
> the memory translation, this too can get moved into usb.c
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

For all of these patches related to usb:

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Thanks for cleaning this up, Arnd.

-- 
balbi

Re: [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c

[Christoph Hellwig]

Thanks for doing this!  The odd platforms have always been very
confusing.

> diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
> index 3d235244bf5c..7af9c0c7c5ab 100644
> --- a/arch/arm/mach-omap1/include/mach/omap1510.h
> +++ b/arch/arm/mach-omap1/include/mach/omap1510.h
> @@ -159,4 +159,3 @@
>  #define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
>  
>  #endif /*  __ASM_ARCH_OMAP15XX_H */
> -

Spurious whitespace change?

> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
> index d8e9bbda8f7b..740c876ae46b 100644
> --- a/arch/arm/mach-omap1/usb.c
> +++ b/arch/arm/mach-omap1/usb.c
> @@ -10,6 +10,7 @@
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
> +#include <linux/delay.h>
>  
>  #include <asm/irq.h>
>  
> @@ -127,6 +128,7 @@ omap_otg_init(struct omap_usb_config *config)
>  
>  		syscon &= ~HST_IDLE_EN;
>  		ohci_device->dev.platform_data = config;
> +
>  		status = platform_device_register(ohci_device);

Same here.

> +#define OMAP1510_LB_OFFSET	   UL(0x30000000)
> +#define OMAP1510_LB_DMA_PFN_OFFSET ((OMAP1510_LB_OFFSET - PAGE_OFFSET) >> PAGE_SHIFT)

Overly long line.

> +/*
> + * OMAP-1510 specific Local Bus clock on/off
> + */
> +static int omap_1510_local_bus_power(int on)
> +{
> +	if (on) {
> +		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
> +		udelay(200);
> +	} else {
> +		omap_writel(0, OMAP1510_LB_MMU_CTL);
> +	}
> +
> +	return 0;
> +}

The caller never checks the const return value, and on is always true as
well.  In fact it seems like omap_1510_local_bus_power and
omap_1510_local_bus_init could probably just be merged into the caller.

> +
> +/*
> + * OMAP-1510 specific Local Bus initialization
> + * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
> + *       See also arch/mach-omap/memory.h for __virt_to_dma() and
> + *       __dma_to_virt() which need to match with the physical
> + *       Local Bus address below.

I think that NOTE is out of date, as __virt_to_dma and __dma_to_virt
don't exist anymore.

> +static int omap_1510_local_bus_init(void)
> +{
> +	unsigned int tlb;
> +	unsigned long lbaddr, physaddr;
> +
> +	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
> +	       OMAP1510_LB_CLOCK_DIV);
> +
> +	/* Configure the Local Bus MMU table */
> +	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
> +		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
> +		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
> +		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
> +		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
> +		       OMAP1510_LB_MMU_CAM_L);
> +		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
> +		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);

Another > 80 chars line.

> +		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
> +		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
> +	}
> +
> +	/* Enable the walking table */
> +	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);

One more.

> +	udelay(200);
> +
> +	return 0;

The return value is ignored.

[PATCH 04/22] ARM: omap1: move ohci phy power handling to board files

[Arnd Bergmann]

Two boards require a a special handler to control
their transceiver power. Move the corresponding code
into the board files and out of the common code.

The osk board already has a dependency on TPS65010,
this adds another one, with the same hack to get it
to compile with CONFIG_TPS65010=m.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-innovator.c   | 19 +++++++++++++++++
 arch/arm/mach-omap1/board-osk.c         | 19 +++++++++++++++++
 drivers/usb/host/ohci-omap.c            | 28 ++-----------------------
 include/linux/platform_data/usb-omap1.h |  2 ++
 4 files changed, 42 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2425f1bacb33..653af63320a8 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -290,6 +290,23 @@ static void __init innovator_init_smc91x(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
+/*
+ * Board specific gang-switched transceiver power on/off.
+ */
+static int innovator_omap_ohci_transceiver_power(int on)
+{
+	if (on)
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+	else
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+
+	return 0;
+}
+
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -300,6 +317,8 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 
 	.register_dev	= 1,
 	.pins[0]	= 2,
+
+	.transceiver_power = innovator_omap_ohci_transceiver_power,
 };
 
 static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4df15e693b6e..3be7b3b580d3 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -278,6 +278,23 @@ static void __init osk_init_cf(void)
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
+/*
+ * Board specific gang-switched transceiver power on/off.
+ * NOTE:  OSK supplies power from DC, not battery.
+ */
+static int osk_omap_ohci_transceiver_power(int on)
+{
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENXIO;
+
+	if (on)
+		tps65010_set_gpio_out_value(GPIO1, LOW);
+	else
+		tps65010_set_gpio_out_value(GPIO1, HIGH);
+
+	return 0;
+}
+
 static struct omap_usb_config osk_usb_config __initdata = {
 	/* has usb host connector (A) ... for development it can also
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -292,6 +309,8 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.rwc		= 1,
 #endif
 	.pins[0]	= 2,
+
+	.transceiver_power = osk_omap_ohci_transceiver_power,
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f7efe65f01c5..e92ef3231f2c 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -77,31 +77,6 @@ static void omap_ohci_clock_power(int on)
 	}
 }
 
-/*
- * Board specific gang-switched transceiver power on/off.
- * NOTE:  OSK supplies power from DC, not battery.
- */
-static int omap_ohci_transceiver_power(int on)
-{
-	if (on) {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (machine_is_omap_osk())
-			tps65010_set_gpio_out_value(GPIO1, LOW);
-	} else {
-		if (machine_is_omap_innovator() && cpu_is_omap1510())
-			__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-		else if (machine_is_omap_osk())
-			tps65010_set_gpio_out_value(GPIO1, HIGH);
-	}
-
-	return 0;
-}
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -213,7 +188,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 	}
 
 	/* FIXME hub_wq hub requests should manage power switching */
-	omap_ohci_transceiver_power(1);
+	if (config->transceiver_power)
+		config->transceiver_power(1);
 
 	/* board init will have already handled HMC and mux setup.
 	 * any external transceiver should already be initialized
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
index 878e572a78bf..e7b8dc92a269 100644
--- a/include/linux/platform_data/usb-omap1.h
+++ b/include/linux/platform_data/usb-omap1.h
@@ -50,6 +50,8 @@ struct omap_usb_config {
 	int (*ocpi_enable)(void);
 
 	void (*lb_reset)(void);
+
+	int (*transceiver_power)(int on);
 };
 
 #endif /* __LINUX_USB_OMAP1_H */
-- 
2.20.0

[PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc

[Arnd Bergmann]

The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.

Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-ams-delta.c         |  2 +-
 arch/arm/mach-omap1/board-generic.c           |  2 +-
 arch/arm/mach-omap1/board-h2.c                |  2 +-
 arch/arm/mach-omap1/board-h3.c                |  2 +-
 arch/arm/mach-omap1/board-htcherald.c         |  2 +-
 arch/arm/mach-omap1/board-innovator.c         |  2 +-
 arch/arm/mach-omap1/board-nokia770.c          |  2 +-
 arch/arm/mach-omap1/board-osk.c               |  2 +-
 arch/arm/mach-omap1/board-palmte.c            |  2 +-
 arch/arm/mach-omap1/board-palmtt.c            |  2 +-
 arch/arm/mach-omap1/board-palmz71.c           |  2 +-
 arch/arm/mach-omap1/board-sx1.c               |  2 +-
 arch/arm/mach-omap1/clock_data.c              |  2 +-
 arch/arm/mach-omap1/usb.c                     |  2 +-
 arch/arm/mach-omap1/usb.h                     | 25 +++++++++++++++++
 drivers/usb/gadget/udc/omap_udc.c             |  3 +-
 drivers/usb/host/ohci-omap.c                  |  4 +--
 drivers/usb/phy/phy-isp1301-omap.c            |  2 +-
 .../usb.h => include/linux/soc/ti/omap1-usb.h | 28 ++++++-------------
 19 files changed, 52 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm/mach-omap1/usb.h
 rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e47a6fbcfd6e..2d63db557792 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -39,7 +39,7 @@
 
 #include <mach/hardware.h>
 #include "camera.h"
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..8ef0a9b17e92 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -21,7 +21,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7ce627ffe8..92a31727a069 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,7 @@
 #include "flash.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..86260498c344 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..f7220b60eb61 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
 #include "mmc.h"
 
 #include <mach/irqs.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 653af63320a8..f169e172421d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -34,7 +34,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..e43c852103f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,7 @@
 #include <mach/mux.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3be7b3b580d3..99ebe4503787 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
 #include <mach/tc.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..4ac981c5cf74 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -38,7 +38,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "mmc.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..e48ae5fbe1b1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -38,7 +38,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..37db0ab31528 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -40,7 +40,7 @@
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0965b1b689ec 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,7 @@
 #include "board-sx1.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..ef46c5f67cf9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
 #include "soc.h"
 
 #include <mach/hardware.h>
-#include <mach/usb.h>   /* for OTG_BASE */
+#include "usb.h"   /* for OTG_BASE */
 
 #include "iomap.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 740c876ae46b..a9deda073822 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -16,7 +16,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include "usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE			0xfffba000
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f36f0730afab..721c9c3fe5a7 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -40,8 +40,9 @@
 #include <asm/mach-types.h>
 
 #include <linux/omap-dma.h>
+#include <linux/platform_data/usb-omap1.h>
 
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
 
 #include "omap_udc.h"
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e92ef3231f2c..841563fba20d 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
 #include <linux/signal.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -37,8 +39,6 @@
 #include <mach/mux.h>
 
 #include <mach/hardware.h>
-#include <mach/usb.h>
-
 
 #define DRIVER_DESC "OHCI OMAP driver"
 
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 7041ba030052..18cf87dcc21f 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -25,7 +25,7 @@
 
 #include <mach/mux.h>
 
-#include <mach/usb.h>
+#include <linux/soc/ti/omap1-usb.h>
 
 #undef VERBOSE
 
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/include/linux/soc/ti/omap1-usb.h
similarity index 86%
rename from arch/arm/mach-omap1/include/mach/usb.h
rename to include/linux/soc/ti/omap1-usb.h
index 5429d86c7190..67488698601a 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/include/linux/soc/ti/omap1-usb.h
@@ -1,34 +1,20 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SOC_TI_OMAP1_USB
+#define __SOC_TI_OMAP1_USB
 /*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
+ * Constants in this file are used all over the place, in platform
+ * code, as well as the udc, phy and ohci drivers.
+ * This is not a great design, but unlikely to get fixed after
+ * such a long time. Don't do this elsewhere.
  */
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
 
 #define OMAP1_OTG_BASE			0xfffb0400
 #define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
 
-#define OMAP2_OHCI_BASE			0x4805e000
 #define OMAP2_UDC_BASE			0x4805e200
 #define OMAP2_OTG_BASE			0x4805e300
 #define OTG_BASE			OMAP1_OTG_BASE
 #define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
 
 /*
  * OTG and transceiver registers, for OMAPs starting with ARM926
@@ -126,3 +112,5 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
 #	define	CONF_USB0_ISOLATE_R	(1 << 3)
 #	define	CONF_USB_PWRDN_DM_R	(1 << 2)
 #	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+#endif
-- 
2.20.0

[PATCH 10/22] usb: omap: avoid mach/*.h headers

[Arnd Bergmann]

The omap usb drivers still rely on mach/*.h headers that
are explicitly or implicitly included, but all the required
definitions are now in include/linux/soc/ti/, so use those
instead and allow compile-testing on other architectures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/usb/gadget/udc/Kconfig     | 2 +-
 drivers/usb/gadget/udc/omap_udc.c  | 2 ++
 drivers/usb/host/Kconfig           | 2 +-
 drivers/usb/host/ohci-omap.c       | 7 +++----
 drivers/usb/phy/Kconfig            | 3 ++-
 drivers/usb/phy/phy-isp1301-omap.c | 4 ++--
 6 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index d354036ff6c8..ac0891a3dbf2 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -128,7 +128,7 @@ config USB_GR_UDC
 
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
-	depends on ARCH_OMAP1
+	depends on ARCH_OMAP1 || (ARCH_OMAP && COMPILE_TEST)
 	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
 	help
 	   Many Texas Instruments OMAP processors have flexible full
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 721c9c3fe5a7..27b6142ea803 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -43,6 +43,8 @@
 #include <linux/platform_data/usb-omap1.h>
 
 #include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omap_udc.h"
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 79bbce685583..e566a99bc8c9 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -201,7 +201,7 @@ config USB_EHCI_HCD_NPCM7XX
 
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
-	depends on ARCH_OMAP
+	depends on ARCH_OMAP || COMPILE_TEST
 	depends on NOP_USB_XCEIV
 	default y
 	---help---
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 841563fba20d..be3571778b60 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -27,6 +27,9 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-omap1.h>
 #include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-mux.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/signal.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -36,10 +39,6 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
 #ifdef CONFIG_TPS65010
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 24b4f091acb8..c6b2559fd334 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -30,7 +30,8 @@ config FSL_USB2_OTG
 
 config ISP1301_OMAP
 	tristate "Philips ISP1301 with OMAP OTG"
-	depends on I2C && ARCH_OMAP_OTG
+	depends on I2C
+	depends on ARCH_OMAP_OTG || (ARM && COMPILE_TEST)
 	depends on USB
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 18cf87dcc21f..0f3475e91403 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -23,9 +23,9 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
+#include <linux/soc/ti/omap1-mux.h>
 #include <linux/soc/ti/omap1-usb.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #undef VERBOSE
 
-- 
2.20.0

Re: [PATCH 10/22] usb: omap: avoid mach/*.h headers

[Greg Kroah-Hartman]

On Thu, Aug 08, 2019 at 11:22:19PM +0200, Arnd Bergmann wrote:
> The omap usb drivers still rely on mach/*.h headers that
> are explicitly or implicitly included, but all the required
> definitions are now in include/linux/soc/ti/, so use those
> instead and allow compile-testing on other architectures.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/usb/gadget/udc/Kconfig     | 2 +-
>  drivers/usb/gadget/udc/omap_udc.c  | 2 ++
>  drivers/usb/host/Kconfig           | 2 +-
>  drivers/usb/host/ohci-omap.c       | 7 +++----
>  drivers/usb/phy/Kconfig            | 3 ++-
>  drivers/usb/phy/phy-isp1301-omap.c | 4 ++--
>  6 files changed, 11 insertions(+), 9 deletions(-)

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[PATCH 15/22] ARM: omap1: move mach/*.h into mach directory

[Arnd Bergmann]

Most of the header files are no longer referenced from outside
arch/arm/mach-omap1, so move them all to that place directly
and change their users to use the new location.

The exceptions are:

- mach/tc.h is used by arch/arm/plat-omap/dma.c
- mach/compress.h is used by the core architecture code
- mach/serial.h is used by mach/compress.h

The mach/memory.h is empty and gets removed in the process,
avoiding the need for CONFIG_NEED_MACH_MEMORY_H.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                              |  1 -
 arch/arm/mach-omap1/ams-delta-fiq-handler.S   |  3 ++-
 arch/arm/mach-omap1/ams-delta-fiq.c           |  2 ++
 arch/arm/mach-omap1/ams-delta-fiq.h           |  2 +-
 arch/arm/mach-omap1/board-ams-delta.c         |  5 ++---
 arch/arm/mach-omap1/board-fsample.c           | 10 ++++-----
 arch/arm/mach-omap1/board-generic.c           |  6 ++----
 arch/arm/mach-omap1/board-h2.c                | 10 ++++-----
 arch/arm/mach-omap1/board-h3.c                | 12 +++++------
 arch/arm/mach-omap1/board-htcherald.c         |  8 +++----
 arch/arm/mach-omap1/board-innovator.c         | 10 ++++-----
 arch/arm/mach-omap1/board-nokia770.c          |  6 ++----
 arch/arm/mach-omap1/board-osk.c               |  9 ++++----
 arch/arm/mach-omap1/board-palmte.c            | 12 +++++------
 arch/arm/mach-omap1/board-palmtt.c            | 12 +++++------
 arch/arm/mach-omap1/board-palmz71.c           | 12 +++++------
 arch/arm/mach-omap1/board-perseus2.c          |  7 +++----
 arch/arm/mach-omap1/board-sx1-mmc.c           |  3 +--
 arch/arm/mach-omap1/board-sx1.c               | 10 ++++-----
 arch/arm/mach-omap1/clock.c                   |  4 ++--
 arch/arm/mach-omap1/clock_data.c              |  5 ++---
 arch/arm/mach-omap1/common.h                  |  3 +--
 arch/arm/mach-omap1/devices.c                 |  8 +++----
 arch/arm/mach-omap1/fb.c                      |  2 +-
 arch/arm/mach-omap1/flash.c                   |  3 ++-
 arch/arm/mach-omap1/fpga.c                    |  3 +--
 arch/arm/mach-omap1/gpio15xx.c                |  3 ++-
 arch/arm/mach-omap1/gpio16xx.c                |  5 +++--
 arch/arm/mach-omap1/gpio7xx.c                 |  3 +--
 .../mach-omap1/{include/mach => }/hardware.h  |  2 --
 arch/arm/mach-omap1/i2c.c                     |  3 ++-
 arch/arm/mach-omap1/id.c                      |  5 ++---
 arch/arm/mach-omap1/include/mach/memory.h     | 12 -----------
 arch/arm/mach-omap1/io.c                      |  5 ++---
 arch/arm/mach-omap1/irq.c                     |  4 +---
 arch/arm/mach-omap1/{include/mach => }/irqs.h |  2 --
 arch/arm/mach-omap1/mcbsp.c                   |  9 ++++----
 .../mach-omap1/{include/mach => }/mtd-xip.h   |  3 ++-
 arch/arm/mach-omap1/mux.c                     |  6 +++---
 arch/arm/mach-omap1/{include/mach => }/mux.h  |  2 --
 arch/arm/mach-omap1/ocpi.c                    |  4 ++--
 .../mach-omap1/{include/mach => }/omap1510.h  |  0
 .../mach-omap1/{include/mach => }/omap16xx.h  |  0
 .../mach-omap1/{include/mach => }/omap7xx.h   |  0
 arch/arm/mach-omap1/pm.c                      |  7 ++++---
 arch/arm/mach-omap1/pm.h                      |  2 ++
 arch/arm/mach-omap1/reset.c                   |  3 +--
 arch/arm/mach-omap1/serial.c                  |  3 ++-
 arch/arm/mach-omap1/sleep.S                   |  2 +-
 arch/arm/mach-omap1/soc.h                     |  4 ++--
 arch/arm/mach-omap1/sram.S                    |  4 ++--
 arch/arm/mach-omap1/time.c                    |  2 +-
 arch/arm/mach-omap1/timer.c                   |  1 +
 arch/arm/mach-omap1/timer32k.c                |  3 +--
 arch/arm/mach-omap1/usb.c                     |  6 +++---
 arch/arm/plat-omap/dma.c                      |  2 +-
 arch/arm/plat-omap/include/plat/cpu.h         | 21 -------------------
 57 files changed, 118 insertions(+), 178 deletions(-)
 rename arch/arm/mach-omap1/{include/mach => }/hardware.h (99%)
 delete mode 100644 arch/arm/mach-omap1/include/mach/memory.h
 rename arch/arm/mach-omap1/{include/mach => }/irqs.h (99%)
 rename arch/arm/mach-omap1/{include/mach => }/mtd-xip.h (97%)
 rename arch/arm/mach-omap1/{include/mach => }/mux.h (98%)
 rename arch/arm/mach-omap1/{include/mach => }/omap1510.h (100%)
 rename arch/arm/mach-omap1/{include/mach => }/omap16xx.h (100%)
 rename arch/arm/mach-omap1/{include/mach => }/omap7xx.h (100%)
 delete mode 100644 arch/arm/plat-omap/include/plat/cpu.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8263fe7a5e64..0febd7a1d65f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -503,7 +503,6 @@ config ARCH_OMAP1
 	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 81159af44862..d2c9481aadba 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,11 +15,12 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
+#include <linux/soc/ti/omap1-io.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
-#include "soc.h"
 
 /*
  * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 43899fa56674..1f62b3de4f87 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -21,7 +21,9 @@
 #include <linux/platform_device.h>
 
 #include <asm/fiq.h>
+#include <linux/soc/ti/omap1-io.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h
index fd76df3cce37..7f843caedb7c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/ams-delta-fiq.h
@@ -16,7 +16,7 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2d63db557792..c937b2f3204b 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -35,12 +35,11 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/mux.h>
 
-#include <mach/hardware.h>
+#include "mux.h"
+#include "hardware.h"
 #include "camera.h"
 #include "usb.h"
-
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index c3aa6f2e5546..501567930a37 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include "flash.h"
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <mach/tc.h>
 
-#include <mach/hardware.h>
-
+#include "mux.h"
+#include "flash.h"
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 8ef0a9b17e92..3b2bcaf4bb01 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -14,15 +14,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "mux.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* assume no Mini-AB port */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 92a31727a069..3dcb50aff749 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -27,22 +27,20 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
 #include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 #include "board-h2.h"
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 86260498c344..305d17fa2a8a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -29,6 +29,8 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 #include <linux/leds.h>
 
 #include <asm/setup.h>
@@ -37,16 +39,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
 #include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "irqs.h"
 #include "usb.h"
-
 #include "common.h"
 #include "board-h3.h"
 
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index f7220b60eb61..f8d93d79d5fb 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,16 +23,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/omap7xx.h>
+#include "hardware.h"
+#include "omap7xx.h"
 #include "mmc.h"
-
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* LCD register definition */
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f169e172421d..ab5f5fc9fa36 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -23,19 +23,17 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include "flash.h"
 #include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "mux.h"
+#include "flash.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e43c852103f5..8e0e58495023 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -28,11 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
+#include "mux.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 38d73da5d13d..627f44350c36 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -41,18 +41,17 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "flash.h"
-#include <mach/mux.h>
 #include <mach/tc.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4ac981c5cf74..0a54cfc2f78d 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -25,21 +25,19 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "flash.h"
-#include <mach/mux.h>
 #include <mach/tc.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "mmc.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e48ae5fbe1b1..b0e64915f103 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -24,22 +24,20 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/omap1_bl.h>
 #include <linux/platform_data/leds-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
 #include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 
 #define PALMTT_USBDETECT_GPIO	0
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 37db0ab31528..f6ff582eda2e 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -28,20 +28,18 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
 #include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
+#include "flash.h"
+#include "mux.h"
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index da0155107d85..a91775c62b7b 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -19,17 +19,16 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
-#include <mach/mux.h>
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 6192b1da75cb..f1c160924dfe 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "board-sx1.h"
-
 #include "mmc.h"
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0965b1b689ec..01a47fc68a55 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,20 +26,18 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "mux.h"
 #include "board-sx1.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* Write to I2C device */
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index bd5be82101f3..24db9b723a6f 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -16,11 +16,11 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index ef46c5f67cf9..36f04da4b939 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -16,14 +16,13 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
 #include "soc.h"
-
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "usb.h"   /* for OTG_BASE */
-
 #include "iomap.h"
 #include "clock.h"
 #include "sram.h"
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 504b959ba5cf..5ceff05e15c0 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -31,8 +31,7 @@
 
 #include <asm/exception.h>
 
-#include <mach/irqs.h>
-
+#include "irqs.h"
 #include "soc.h"
 #include "i2c.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 3c4900ac72fc..36b03410b210 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,16 +14,16 @@
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/omap-wd-timer.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
-#include <mach/mux.h>
+#include "mux.h"
 
-#include <mach/omap7xx.h>
+#include "omap7xx.h"
 #include "camera.h"
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index b093375afc27..a4538c231f66 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #if IS_ENABLED(CONFIG_FB_OMAP)
 
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 40e43ce5329f..5e5b20f73c1b 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,11 +6,12 @@
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <mach/tc.h>
+
 #include "flash.h"
 
-#include <mach/hardware.h>
 
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index f03ed523f20f..4c71a195969f 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -24,8 +24,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 312a0924d786..fa0a285c40b4 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -18,8 +18,9 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-soc.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5b7a29b294d4..4787bf281eae 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -18,9 +18,10 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 0e5f68de23bf..c97c74aa8756 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -19,8 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <mach/irqs.h>
-
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/hardware.h
similarity index 99%
rename from arch/arm/mach-omap1/include/mach/hardware.h
rename to arch/arm/mach-omap1/hardware.h
index 05c5cd3e95f4..2cfc342c069c 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/hardware.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-omap1/include/mach/hardware.h
- *
  * Hardware definitions for TI OMAP processors and boards
  *
  * NOTE: Please put device driver specific defines into a separate header
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5e6d81b1624c..f574eb0bcc0b 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -7,7 +7,8 @@
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-omap.h>
-#include <mach/mux.h>
+
+#include "mux.h"
 #include "soc.h"
 
 #define OMAP_I2C_SIZE		0x3f
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 91556e374152..c3bb1b71fdf3 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -12,12 +12,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <asm/system_info.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OMAP_DIE_ID_0		0xfffe1800
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
deleted file mode 100644
index ee91a6cb548d..000000000000
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* REVISIT: omap1 legacy drivers still rely on this */
-#include <mach/hardware.h>
-
-#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 5a173fc2a1ca..cf425aeeb240 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -9,14 +9,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omap-dma.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
 #include <mach/tc.h>
-#include <linux/omap-dma.h>
-
+#include "mux.h"
 #include "iomap.h"
 #include "common.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index b11edc8a46f0..6b51387b27ac 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -47,9 +47,7 @@
 #include <asm/mach/irq.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/irqs.h
similarity index 99%
rename from arch/arm/mach-omap1/include/mach/irqs.h
rename to arch/arm/mach-omap1/irqs.h
index 30bf007700cf..2851acfe5ff3 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/irqs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index f36c34f47f11..b7bc7e4b426c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -15,14 +15,13 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
 #include <linux/omap-dma.h>
-#include <mach/mux.h>
-#include "soc.h"
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
-#include <mach/irqs.h>
-
+#include "mux.h"
+#include "soc.h"
+#include "irqs.h"
 #include "iomap.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h
similarity index 97%
rename from arch/arm/mach-omap1/include/mach/mtd-xip.h
rename to arch/arm/mach-omap1/mtd-xip.h
index d09b2bc4920f..b675d501b13d 100644
--- a/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/mtd-xip.h
@@ -14,7 +14,8 @@
 #ifndef __ARCH_OMAP_MTD_XIP_H__
 #define __ARCH_OMAP_MTD_XIP_H__
 
-#include <mach/hardware.h>
+#include "hardware.h"
+#include <linux/soc/ti/omap1-io.h>
 #define OMAP_MPU_TIMER_BASE	(0xfffec500)
 #define OMAP_MPU_TIMER_OFFSET	0x100
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 972665bf52d6..2d9458ff1d29 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -12,10 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
-#include <mach/mux.h>
+#include "hardware.h"
+#include "mux.h"
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/mux.h
similarity index 98%
rename from arch/arm/mach-omap1/include/mach/mux.h
rename to arch/arm/mach-omap1/mux.h
index 362abb9f1dcf..46e5b94e27a2 100644
--- a/arch/arm/mach-omap1/include/mach/mux.h
+++ b/arch/arm/mach-omap1/mux.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/plat-omap/include/mach/mux.h
- *
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
index 380ea2de58c1..c4a33ace4a8b 100644
--- a/arch/arm/mach-omap1/ocpi.c
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -20,9 +20,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OCPI_BASE		0xfffec320
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/omap1510.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap1510.h
rename to arch/arm/mach-omap1/omap1510.h
diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap16xx.h
rename to arch/arm/mach-omap1/omap16xx.h
diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h
similarity index 100%
rename from arch/arm/mach-omap1/include/mach/omap7xx.h
rename to arch/arm/mach-omap1/omap7xx.h
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d068958d6f8a..dd3743c891b7 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -52,13 +52,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
+#include <linux/soc/ti/omap1-io.h>
 #include <mach/tc.h>
-#include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <clocksource/timer-ti-dm.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "irqs.h"
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index cd926dcb5e7f..d9165709c532 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -34,6 +34,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_PM_H
 #define __ARCH_ARM_MACH_OMAP1_PM_H
 
+#include <linux/soc/ti/omap1-io.h>
+
 /*
  * ----------------------------------------------------------------------------
  * Register and offset definitions to be used in PM assembler code
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index af2c120b0c4e..2eee6a6965ff 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -6,8 +6,7 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 9eb591fbfd89..d6d1843337a5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -19,8 +19,9 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
+#include <mach/serial.h>
 
+#include "mux.h"
 #include "pm.h"
 #include "soc.h"
 
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index a908c51839a4..f111b79512ce 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,7 +36,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include "iomap.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
index 22931839a666..5fb57fdd9c2b 100644
--- a/arch/arm/mach-omap1/soc.h
+++ b/arch/arm/mach-omap1/soc.h
@@ -1,6 +1,6 @@
 /*
  * We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "irqs.h"
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 37f34fcd65fb..89f4dc1b70f0 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -6,11 +6,11 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 
 	.text
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 524977a31a49..7cc1a968230e 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -47,10 +47,10 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 4447210c9b0d..39e40ca40246 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <clocksource/timer-ti-dm.h>
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..c884508a8c9f 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,8 +52,7 @@
 
 #include <plat/counter-32k.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index a9deda073822..fda1322bcc1b 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -11,13 +11,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/irq.h>
 
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "mux.h"
 #include "usb.h"
-
 #include "common.h"
 
 /* These routines should handle the standard chip-specific modes
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 749d3cae15c0..38e5773fbb86 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -35,9 +35,9 @@
 #include <linux/omap-dma.h>
 
 #ifdef CONFIG_ARCH_OMAP1
-#include <mach/hardware.h>
 #include <linux/soc/ti/omap1-io.h>
 #include <linux/soc/ti/omap1-soc.h>
+#include <mach/tc.h>
 #endif
 
 /*
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
deleted file mode 100644
index 36f4c352cc66..000000000000
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#ifdef CONFIG_ARCH_OMAP1
-#include <mach/soc.h>
-#endif
-
-#endif
-- 
2.20.0