[PATCH AUTOSEL 4.4 2/4] usb: gadget: composite: Clear "suspended" on reset/disconnect

[PATCH AUTOSEL 4.4 2/4] usb: gadget: composite: Clear "suspended" on reset/disconnect

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 602fda17c7356bb7ae98467d93549057481d11dd ]

In some cases, one can get out of suspend with a reset or
a disconnect followed by a reconnect. Previously we would
leave a stale suspended flag set.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 8bf54477f4724..351a406b97af7 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1889,6 +1889,7 @@ void composite_disconnect(struct usb_gadget *gadget)
 	 * disconnect callbacks?
 	 */
 	spin_lock_irqsave(&cdev->lock, flags);
+	cdev->suspended = 0;
 	if (cdev->config)
 		reset_config(cdev);
 	if (cdev->driver->disconnect)
-- 
2.20.1

[PATCH AUTOSEL 4.4 3/4] usb: host: fotg2: restart hcd after port reset

[Sasha Levin]

From: Hans Ulli Kroll <ulli.kroll@googlemail.com>

[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/fotg210-hcd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 2341af4f34909..11b3a8c57eabc 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1653,6 +1653,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/* see what we found out */
 			temp = check_reset_complete(fotg210, wIndex, status_reg,
 					fotg210_readl(fotg210, status_reg));
+
+			/* restart schedule */
+			fotg210->command |= CMD_RUN;
+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
 		}
 
 		if (!(temp & (PORT_RESUME|PORT_RESET))) {
-- 
2.20.1