[PATCH] USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P

[PATCH] USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P

[Fabio D'Urso]

This device presents itself as a USB hub with three attached devices:
 - An ACM serial port connected to the GPS module (not affected by this
   commit)
 - An FTDI serial port connected to the GPS module (1546:0502)
 - Another FTDI serial port connected to the ODIN-W2 radio module
   (1546:0503)

This commit registers U-Blox's VID and the PIDs of the second and third
devices.

Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf

Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it>
---
 drivers/usb/serial/ftdi_sio.c     | 3 +++
 drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 25e81faf4c24..9ad44a96dfe3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1033,6 +1033,9 @@ static const struct usb_device_id id_table_combined[] = {
 	/* Sienna devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
 	{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+	/* U-Blox devices */
+	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
+	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 22d66217cb41..e8373528264c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1558,3 +1558,10 @@
  */
 #define UNJO_VID			0x22B7
 #define UNJO_ISODEBUG_V1_PID		0x150D
+
+/*
+ * U-Blox products (http://www.u-blox.com).
+ */
+#define UBLOX_VID			0x1546
+#define UBLOX_C099F9P_ZED_PID		0x0502
+#define UBLOX_C099F9P_ODIN_PID		0x0503
-- 
2.23.0

Re: [PATCH] USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P

[Johan Hovold]

On Thu, Nov 14, 2019 at 01:30:53AM +0000, Fabio D'Urso wrote:
> This device presents itself as a USB hub with three attached devices:
>  - An ACM serial port connected to the GPS module (not affected by this
>    commit)
>  - An FTDI serial port connected to the GPS module (1546:0502)
>  - Another FTDI serial port connected to the ODIN-W2 radio module
>    (1546:0503)
> 
> This commit registers U-Blox's VID and the PIDs of the second and third
> devices.
> 
> Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf
> 
> Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it>

Applied, thanks!

Johan