linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Ajay Gupta <ajayg@nvidia.com>
Cc: Ajay Gupta <ajaykuee@gmail.com>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH v6] usb: typec: ucsi: add support for separate DP altmode devices
Date: Tue, 17 Dec 2019 11:21:39 +0200	[thread overview]
Message-ID: <20191217092139.GA22923@kuha.fi.intel.com> (raw)
In-Reply-To: <BYAPR12MB2727CB6BDCD3E76DDB92BB55DC510@BYAPR12MB2727.namprd12.prod.outlook.com>

On Mon, Dec 16, 2019 at 10:49:46PM +0000, Ajay Gupta wrote:
> Hi Heikki,
> 
> > -----Original Message-----
> > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org>
> > On Behalf Of Heikki Krogerus
> > Sent: Friday, December 13, 2019 4:38 AM
> > To: Ajay Gupta <ajayg@nvidia.com>
> > Cc: Ajay Gupta <ajaykuee@gmail.com>; linux-usb@vger.kernel.org
> > Subject: Re: [PATCH v6] usb: typec: ucsi: add support for separate DP altmode
> > devices
> > 
> > External email: Use caution opening links or attachments
> > 
> > 
> > On Thu, Dec 12, 2019 at 05:42:28PM +0000, Ajay Gupta wrote:
> > > Hi Heikki,
> > >
> > > > -----Original Message-----
> > > > From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > Sent: Thursday, December 12, 2019 5:44 AM
> > > > To: Ajay Gupta <ajaykuee@gmail.com>
> > > > Cc: linux-usb@vger.kernel.org; Ajay Gupta <ajayg@nvidia.com>
> > > > Subject: Re: [PATCH v6] usb: typec: ucsi: add support for separate
> > > > DP altmode devices
> > > >
> > > >
> > > > Hi Ajay,
> > > >
> > > > On Fri, Nov 22, 2019 at 04:43:47PM -0800, Ajay Gupta wrote:
> > > > > From: Ajay Gupta <ajayg@nvidia.com>
> > > > >
> > > > > CCGx controller used on NVIDIA GPU card has two separate display
> > > > > altmode for two DP pin assignments. UCSI specification doesn't
> > > > > prohibits using separate display altmode.
> > > > >
> > > > > Current UCSI Type-C framework expects only one display altmode for
> > > > > all DP pin assignment. This patch squashes two separate display
> > > > > altmode into single altmode to support controllers with separate
> > > > > display altmode. We first read all the alternate modes of
> > > > > connector and then run through it to know if there are separate
> > > > > display altmodes. If so, it prepares a new port altmode set after
> > > > > squashing two or more separate altmodes into one.
> > > >
> > > > I didn't see any major issues with this. There were still few extra
> > > > spaces etc., but I can clean those. Maybe it would have been good to
> > > > mention in the commit message that the reason why we need those two
> > > > separate alt modes, for what is in reality two separate pin
> > > > configurations, is limitations in UCSI specification, but never mind.
> > > >
> > > > I still don't like the approach, but since I'm unable to explain my
> > > > idea, or have time to write something for this myself, I don't want
> > > > block this any longer. It does not add that much code, so once I
> > > > have time, I can always try to improve it myself, right?
> > > >
> > > > Otherwise it's OK by me. I'll queue it up.
> > > Thanks for reviewing. Please feel free to improve the patch or commit
> > message.
> > 
> > One thing that I do want to do is I want to isolate the changes done to ucsi.c.
> > Can you test the attached diff? It applies on top of this patch.
> Tested the diff and it looks good. Please add additional change at [A] on top of
> your diff..

Done.

> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -368,11 +368,8 @@ ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient)
>                 if (!len)
>                         break;
> 
> -               if (!alt.svid) {
> -                       /* break out of outer loop and register */
> -                       i = max_altmodes;
> +               if (!alt.svid)
>                         break;
> -               }
> 
>                 orig[k].mid = alt.mid;
>                 orig[k].svid = alt.svid;
> @@ -382,7 +379,7 @@ ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient)
>          * Update the original altmode table as some ppms may report
>          * multiple DP altmodes.
>          */
> -       if (recipient == UCSI_RECIPIENT_CON && ucsi->ops->update_altmodes)
> +       if (recipient == UCSI_RECIPIENT_CON)
>                 multi_dp = ucsi->ops->update_altmodes(ucsi, orig, updated);
> 
>         /* now register altmodes */

thanks,

-- 
heikki

      reply	other threads:[~2019-12-17  9:21 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-23  0:43 [PATCH v6] usb: typec: ucsi: add support for separate DP altmode devices Ajay Gupta
2019-12-03 17:45 ` Ajay Gupta
2019-12-04 16:02   ` Heikki Krogerus
2019-12-12 13:44 ` Heikki Krogerus
2019-12-12 17:42   ` Ajay Gupta
2019-12-13 12:37     ` Heikki Krogerus
2019-12-16 22:49       ` Ajay Gupta
2019-12-17  9:21         ` Heikki Krogerus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191217092139.GA22923@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=ajayg@nvidia.com \
    --cc=ajaykuee@gmail.com \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).