From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v5 5/5] arm64: tegra: Enable XUSB host in P2972-0000 board
Date: Fri, 3 Jan 2020 16:18:14 +0800 [thread overview]
Message-ID: <20200103081814.9848-6-jckuo@nvidia.com> (raw)
In-Reply-To: <20200103081814.9848-1-jckuo@nvidia.com>
This commit enables XUSB host and pad controller in Tegra194
P2972-0000 board.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v5: none
Changes in v4: none
Changes in v3: none
Changes in v2:
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 63 +++++++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b02..014e18b2d52a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -67,6 +67,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -230,7 +253,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -313,5 +336,16 @@
gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 353a6a22196d..2cbcae39d1b0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -37,6 +37,69 @@
status = "okay";
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ nvidia,disable-gen2;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
+
pwm@c340000 {
status = "okay";
};
--
2.17.1
prev parent reply other threads:[~2020-01-03 8:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 8:18 [PATCH v5 0/5] add Tegra194 XUSB host and pad controller support JC Kuo
2020-01-03 8:18 ` [PATCH v5 1/5] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2020-01-03 8:18 ` [PATCH v5 2/5] phy: tegra: xusb: Add Tegra194 support JC Kuo
2020-01-03 8:18 ` [PATCH v5 3/5] dt-bindings: phy: tegra: " JC Kuo
2020-01-03 22:39 ` Rob Herring
2020-01-06 7:10 ` JC Kuo
2020-01-09 1:31 ` JC Kuo
2020-01-10 11:26 ` Thierry Reding
2020-01-13 2:15 ` JC Kuo
2020-01-03 8:18 ` [PATCH v5 4/5] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2020-01-03 8:18 ` JC Kuo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103081814.9848-6-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).