From: Al Cooper <alcooperx@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Al Cooper <alcooperx@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Arnd Bergmann <arnd@arndb.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
bcm-kernel-feedback-list@broadcom.com,
"David S. Miller" <davem@davemloft.net>,
devicetree@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Johan Hovold <johan@kernel.org>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-usb@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
Mathias Nyman <mathias.nyman@intel.com>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Rob Herring <robh@kernel.org>
Subject: [PATCH 1/4] dt-bindings: Add Broadcom STB USB support
Date: Fri, 13 Mar 2020 10:15:42 -0400 [thread overview]
Message-ID: <20200313141545.31943-2-alcooperx@gmail.com> (raw)
In-Reply-To: <20200313141545.31943-1-alcooperx@gmail.com>
Add DT bindings for Broadcom STB USB EHCI and XHCI drivers.
NOTE: The OHCI driver is not included because it uses the generic
platform driver.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
.../bindings/usb/brcm,bcm7445-ehci.yaml | 60 +++++++++++++++++++
.../devicetree/bindings/usb/usb-xhci.txt | 1 +
2 files changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
new file mode 100644
index 000000000000..ad570ca4ca6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB EHCI Controller Device Tree Bindings
+
+allOf:
+ - $ref: "usb-hcd.yaml"
+
+maintainers:
+ - Al Cooper <alcooperx@gmail.com>
+
+properties:
+ compatible:
+ contains:
+ const: brcm,bcm7445-ehci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Clock specifier for the EHCI clock
+
+ clock-names:
+ const: sw_usb
+
+ phys:
+ description: PHY specifier for the USB PHY
+
+ phy-names:
+ const: usbphy
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phys
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ ehci@f0b00300 {
+ compatible = "brcm,bcm7445-ehci";
+ reg = <0xf0b00300 0xa8>;
+ interrupts = <0x0 0x5a 0x0>;
+ interrupt-names = "usb0_ehci_0";
+ phys = <&usbphy_0 0x0>;
+ phy-names = "usbphy"
+ clocks = <&usb20>;
+ clock-names = "sw_usb"
+ };
+...
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 3f378951d624..aafc316b5a8e 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -23,6 +23,7 @@ Required properties:
device
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible
device
+ - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI
- "xhci-platform" (deprecated)
When compatible with the generic version, nodes must list the
--
2.17.1
next prev parent reply other threads:[~2020-03-13 14:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-13 14:15 [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's Al Cooper
2020-03-13 14:15 ` Al Cooper [this message]
2020-03-13 22:02 ` [PATCH 1/4] dt-bindings: Add Broadcom STB USB support Rob Herring
2020-03-27 20:25 ` Al Cooper
2020-03-13 14:15 ` [PATCH 2/4] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's Al Cooper
2020-03-13 14:58 ` Andy Shevchenko
2020-03-13 14:15 ` [PATCH 3/4] usb: ehci: Add new EHCI driver " Al Cooper
2020-03-13 15:08 ` Andy Shevchenko
2020-03-27 20:27 ` Al Cooper
2020-03-17 18:48 ` Greg Kroah-Hartman
2020-03-27 20:28 ` Al Cooper
2020-03-13 14:15 ` [PATCH 4/4] usb: host: Add ability to build new Broadcom STB USB drivers Al Cooper
2020-03-13 15:10 ` Andy Shevchenko
2020-03-13 16:18 ` [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's Andy Shevchenko
2020-03-27 20:22 ` Al Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200313141545.31943-2-alcooperx@gmail.com \
--to=alcooperx@gmail.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=b.zolnierkie@samsung.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).