* [RESEND] [PATCH v2 1/3] usb/ohci-platform: Fix a warning when hibernating
@ 2020-05-18 15:49 Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 2/3] usb/xhci-plat: Set PM runtime as active on resume Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 3/3] usb/ehci-platform: " Qais Yousef
0 siblings, 2 replies; 3+ messages in thread
From: Qais Yousef @ 2020-05-18 15:49 UTC (permalink / raw)
To: Alan Stern, Greg Kroah-Hartman
Cc: Qais Yousef, Tony Prisk, Mathias Nyman, Oliver Neukum,
linux-arm-kernel, linux-usb, linux-kernel
The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.
[ 111.779649] ------------[ cut here ]------------
[ 111.788382] URB (____ptrval____) submitted while active
[ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[ 111.805417] Modules linked in:
[ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[ 111.817796] Hardware name: ARM Juno development board (r2) (DT)
[ 111.823896] Workqueue: usb_hub_wq hub_event
[ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 111.833156] pc : usb_submit_urb+0x3d8/0x590
[ 111.837471] lr : usb_submit_urb+0x3d8/0x590
[ 111.841783] sp : ffff800018de38b0
[ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[ 111.861635] x23: 0000000000000004 x22: 0000000000000c00
[ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[ 111.889019] x13: 0720072007200720 x12: 0720072007200720
[ 111.894496] x11: 0000000000000000 x10: 00000000a5286134
[ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[ 111.927356] Call trace:
[ 111.929892] usb_submit_urb+0x3d8/0x590
[ 111.933852] hub_activate+0x108/0x7f0
[ 111.937633] hub_resume+0xac/0x148
[ 111.941149] usb_resume_interface.isra.10+0x60/0x138
[ 111.946265] usb_resume_both+0xe4/0x140
[ 111.950225] usb_runtime_resume+0x24/0x30
[ 111.954365] __rpm_callback+0xdc/0x138
[ 111.958236] rpm_callback+0x34/0x98
[ 111.961841] rpm_resume+0x4a8/0x720
[ 111.965445] rpm_resume+0x50c/0x720
[ 111.969049] __pm_runtime_resume+0x4c/0xb8
[ 111.973276] usb_autopm_get_interface+0x28/0x60
[ 111.977948] hub_event+0x80/0x16d8
[ 111.981466] process_one_work+0x2a4/0x748
[ 111.985604] worker_thread+0x48/0x498
[ 111.989387] kthread+0x13c/0x140
[ 111.992725] ret_from_fork+0x10/0x18
[ 111.996415] irq event stamp: 354
[ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]---
The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.
Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
---
drivers/usb/host/ohci-platform.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 7addfc2cbadc..4a8456f12a73 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -299,6 +299,11 @@ static int ohci_platform_resume(struct device *dev)
}
ohci_resume(hcd, false);
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
return 0;
}
#endif /* CONFIG_PM_SLEEP */
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [RESEND] [PATCH v2 2/3] usb/xhci-plat: Set PM runtime as active on resume
2020-05-18 15:49 [RESEND] [PATCH v2 1/3] usb/ohci-platform: Fix a warning when hibernating Qais Yousef
@ 2020-05-18 15:49 ` Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 3/3] usb/ehci-platform: " Qais Yousef
1 sibling, 0 replies; 3+ messages in thread
From: Qais Yousef @ 2020-05-18 15:49 UTC (permalink / raw)
To: Alan Stern, Greg Kroah-Hartman
Cc: Qais Yousef, Tony Prisk, Mathias Nyman, Oliver Neukum,
linux-arm-kernel, linux-usb, linux-kernel
Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.
ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].
[1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
---
drivers/usb/host/xhci-plat.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1d4f6f85f0fe..05cafef702a9 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -407,7 +407,15 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
if (ret)
return ret;
- return xhci_resume(xhci, 0);
+ ret = xhci_resume(xhci, 0);
+ if (ret)
+ return ret;
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
}
static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [RESEND] [PATCH v2 3/3] usb/ehci-platform: Set PM runtime as active on resume
2020-05-18 15:49 [RESEND] [PATCH v2 1/3] usb/ohci-platform: Fix a warning when hibernating Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 2/3] usb/xhci-plat: Set PM runtime as active on resume Qais Yousef
@ 2020-05-18 15:49 ` Qais Yousef
1 sibling, 0 replies; 3+ messages in thread
From: Qais Yousef @ 2020-05-18 15:49 UTC (permalink / raw)
To: Alan Stern, Greg Kroah-Hartman
Cc: Qais Yousef, Tony Prisk, Mathias Nyman, Oliver Neukum,
linux-arm-kernel, linux-usb, linux-kernel
Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.
ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].
[1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
---
drivers/usb/host/ehci-platform.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index e4fc3f66d43b..e9a49007cce4 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -455,6 +455,10 @@ static int ehci_platform_resume(struct device *dev)
ehci_resume(hcd, priv->reset_on_resume);
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
if (priv->quirk_poll)
quirk_poll_init(priv);
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-18 15:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-18 15:49 [RESEND] [PATCH v2 1/3] usb/ohci-platform: Fix a warning when hibernating Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 2/3] usb/xhci-plat: Set PM runtime as active on resume Qais Yousef
2020-05-18 15:49 ` [RESEND] [PATCH v2 3/3] usb/ehci-platform: " Qais Yousef
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).