[PATCH 4.4 036/135] usb/ohci-platform: Fix a warning when hibernating

[PATCH 4.4 036/135] usb/ohci-platform: Fix a warning when hibernating

[Sasha Levin]

From: Qais Yousef <qais.yousef@arm.com>

[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]

The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.

[  111.779649] ------------[ cut here ]------------
[  111.788382] URB (____ptrval____) submitted while active
[  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[  111.805417] Modules linked in:
[  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[  111.817796] Hardware name: ARM Juno development board (r2) (DT)
[  111.823896] Workqueue: usb_hub_wq hub_event
[  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[  111.833156] pc : usb_submit_urb+0x3d8/0x590
[  111.837471] lr : usb_submit_urb+0x3d8/0x590
[  111.841783] sp : ffff800018de38b0
[  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[  111.861635] x23: 0000000000000004 x22: 0000000000000c00
[  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[  111.889019] x13: 0720072007200720 x12: 0720072007200720
[  111.894496] x11: 0000000000000000 x10: 00000000a5286134
[  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[  111.927356] Call trace:
[  111.929892]  usb_submit_urb+0x3d8/0x590
[  111.933852]  hub_activate+0x108/0x7f0
[  111.937633]  hub_resume+0xac/0x148
[  111.941149]  usb_resume_interface.isra.10+0x60/0x138
[  111.946265]  usb_resume_both+0xe4/0x140
[  111.950225]  usb_runtime_resume+0x24/0x30
[  111.954365]  __rpm_callback+0xdc/0x138
[  111.958236]  rpm_callback+0x34/0x98
[  111.961841]  rpm_resume+0x4a8/0x720
[  111.965445]  rpm_resume+0x50c/0x720
[  111.969049]  __pm_runtime_resume+0x4c/0xb8
[  111.973276]  usb_autopm_get_interface+0x28/0x60
[  111.977948]  hub_event+0x80/0x16d8
[  111.981466]  process_one_work+0x2a4/0x748
[  111.985604]  worker_thread+0x48/0x498
[  111.989387]  kthread+0x13c/0x140
[  111.992725]  ret_from_fork+0x10/0x18
[  111.996415] irq event stamp: 354
[  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---

The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.

Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ohci-platform.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index c2669f185f658..0e5580e6f35cb 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -339,6 +339,11 @@ static int ohci_platform_resume(struct device *dev)
 	}
 
 	ohci_resume(hcd, false);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
-- 
2.25.1

[PATCH 4.4 055/135] usb/xhci-plat: Set PM runtime as active on resume

[Sasha Levin]

From: Qais Yousef <qais.yousef@arm.com>

[ Upstream commit 79112cc3c29f4a8c73a21428fbcbcb0afb005e3e ]

Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.

ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].

[1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-2-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-plat.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c4c40e9d42471..510fb7853f92a 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -249,8 +249,17 @@ static int xhci_plat_resume(struct device *dev)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ret;
+
+	ret = xhci_resume(xhci, 0);
+	if (ret)
+		return ret;
 
-	return xhci_resume(xhci, 0);
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
 }
 
 static const struct dev_pm_ops xhci_plat_pm_ops = {
-- 
2.25.1

[PATCH 4.4 056/135] usb/ehci-platform: Set PM runtime as active on resume

[Sasha Levin]

From: Qais Yousef <qais.yousef@arm.com>

[ Upstream commit 16bdc04cc98ab0c74392ceef2475ecc5e73fcf49 ]

Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.

ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].

[1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-3-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-platform.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index bd7082f297bbe..56200650b46b4 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -375,6 +375,11 @@ static int ehci_platform_resume(struct device *dev)
 	}
 
 	ehci_resume(hcd, priv->reset_on_resume);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
-- 
2.25.1