* [PATCH AUTOSEL 4.14 17/22] bdc: Fix bug causing crash after multiple disconnects
[not found] <20200810191345.3795166-1-sashal@kernel.org>
2020-08-10 19:13 ` [PATCH AUTOSEL 4.14 16/22] usb: gadget: net2280: fix memory leak on probe error handling paths Sasha Levin
@ 2020-08-10 19:13 ` Sasha Levin
2020-08-10 19:13 ` [PATCH AUTOSEL 4.14 18/22] usb: bdc: Halt controller on suspend Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-08-10 19:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasi Kumar, Al Cooper, Florian Fainelli, Felipe Balbi,
Sasha Levin, linux-usb
From: Sasi Kumar <sasi.kumar@broadcom.com>
[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]
Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.
Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 4 ++++
drivers/usb/gadget/udc/bdc/bdc_ep.c | 16 ++++++++++------
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 7a8af4b916cff..2660cc2e42a08 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -288,6 +288,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
* in that case reinit is passed as 1
*/
if (reinit) {
+ int i;
/* Enable interrupts */
temp = bdc_readl(bdc->regs, BDC_BDCSC);
temp |= BDC_GIE;
@@ -297,6 +298,9 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
/* Initialize SRR to 0 */
memset(bdc->srr.sr_bds, 0,
NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+ /* clear ep flags to avoid post disconnect stops/deconfigs */
+ for (i = 1; i < bdc->num_eps; ++i)
+ bdc->bdc_ep_array[i]->flags = 0;
} else {
/* One time initiaization only */
/* Enable status report function pointers */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index be9f40bc9c12b..bb2d5ebd97b52 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -621,7 +621,6 @@ int bdc_ep_enable(struct bdc_ep *ep)
}
bdc_dbg_bd_list(bdc, ep);
/* only for ep0: config ep is called for ep0 from connect event */
- ep->flags |= BDC_EP_ENABLED;
if (ep->ep_num == 1)
return ret;
@@ -765,10 +764,13 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
__func__, ep->name, start_bdi, end_bdi);
dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n",
ep, (void *)ep->usb_ep.desc);
- /* Stop the ep to see where the HW is ? */
- ret = bdc_stop_ep(bdc, ep->ep_num);
- /* if there is an issue with stopping ep, then no need to go further */
- if (ret)
+ /* if still connected, stop the ep to see where the HW is ? */
+ if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+ ret = bdc_stop_ep(bdc, ep->ep_num);
+ /* if there is an issue, then no need to go further */
+ if (ret)
+ return 0;
+ } else
return 0;
/*
@@ -1917,7 +1919,9 @@ static int bdc_gadget_ep_disable(struct usb_ep *_ep)
__func__, ep->name, ep->flags);
if (!(ep->flags & BDC_EP_ENABLED)) {
- dev_warn(bdc->dev, "%s is already disabled\n", ep->name);
+ if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+ dev_warn(bdc->dev, "%s is already disabled\n",
+ ep->name);
return 0;
}
spin_lock_irqsave(&bdc->lock, flags);
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 4.14 18/22] usb: bdc: Halt controller on suspend
[not found] <20200810191345.3795166-1-sashal@kernel.org>
2020-08-10 19:13 ` [PATCH AUTOSEL 4.14 16/22] usb: gadget: net2280: fix memory leak on probe error handling paths Sasha Levin
2020-08-10 19:13 ` [PATCH AUTOSEL 4.14 17/22] bdc: Fix bug causing crash after multiple disconnects Sasha Levin
@ 2020-08-10 19:13 ` Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2020-08-10 19:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Danesh Petigara, Al Cooper, Florian Fainelli, Felipe Balbi,
Sasha Levin, linux-usb
From: Danesh Petigara <danesh.petigara@broadcom.com>
[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]
GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.
Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 2660cc2e42a08..58ba04d858bab 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -613,9 +613,14 @@ static int bdc_remove(struct platform_device *pdev)
static int bdc_suspend(struct device *dev)
{
struct bdc *bdc = dev_get_drvdata(dev);
+ int ret;
- clk_disable_unprepare(bdc->clk);
- return 0;
+ /* Halt the controller */
+ ret = bdc_stop(bdc);
+ if (!ret)
+ clk_disable_unprepare(bdc->clk);
+
+ return ret;
}
static int bdc_resume(struct device *dev)
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread