[PATCH AUTOSEL 5.8 045/101] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[PATCH AUTOSEL 5.8 045/101] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc

[Sasha Levin]

From: Yu Chen <chenyu56@huawei.com>

[ Upstream commit f580170f135af14e287560d94045624d4242d712 ]

SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
of Hisilicon Kirin Soc when dwc3 core act as host.

[mchehab: dropped a dev_dbg() as only traces are now allowwed on this driver]

Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 25 +++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  7 +++++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 25c686a752b0f..e476e83308bc1 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -119,6 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work)
 	struct dwc3 *dwc = work_to_dwc(work);
 	unsigned long flags;
 	int ret;
+	u32 reg;
 
 	if (dwc->dr_mode != USB_DR_MODE_OTG)
 		return;
@@ -172,6 +173,11 @@ static void __dwc3_set_mode(struct work_struct *work)
 				otg_set_vbus(dwc->usb2_phy->otg, true);
 			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
 			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+			if (dwc->dis_split_quirk) {
+				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+				reg |= DWC3_GUCTL3_SPLITDISABLE;
+				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+			}
 		}
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1357,6 +1363,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
 
+	dwc->dis_split_quirk = device_property_read_bool(dev,
+				"snps,dis-split-quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
@@ -1866,10 +1875,26 @@ static int dwc3_resume(struct device *dev)
 
 	return 0;
 }
+
+static void dwc3_complete(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	u32		reg;
+
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+			dwc->dis_split_quirk) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+		reg |= DWC3_GUCTL3_SPLITDISABLE;
+		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+	}
+}
+#else
+#define dwc3_complete NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	.complete = dwc3_complete,
 	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
 			dwc3_runtime_idle)
 };
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 013f42a2b5dcc..af5533b097133 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -138,6 +138,7 @@
 #define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GUCTL3		0xc60c
 #define DWC3_GFLADJ		0xc630
 
 /* Device Registers */
@@ -380,6 +381,9 @@
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
+
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
@@ -1052,6 +1056,7 @@ struct dwc3_scratchpad_array {
  * 	2	- No de-emphasis
  * 	3	- Reserved
  * @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
  * @imod_interval: set the interrupt moderation interval in 250ns
  *                 increments or 0 to disable.
  */
@@ -1245,6 +1250,8 @@ struct dwc3 {
 
 	unsigned		dis_metastability_quirk:1;
 
+	unsigned		dis_split_quirk:1;
+
 	u16			imod_interval;
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 046/101] usb: gadget: function: printer: fix use-after-free in __lock_acquire

[Sasha Levin]

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]

Fix this by increase object reference count.

BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377

CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff

Allocated by task 2393:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
 __do_sys_symlinkat fs/namei.c:4242 [inline]
 __se_sys_symlinkat fs/namei.c:4239 [inline]
 __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3368:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 slab_free_hook mm/slub.c:1444 [inline]
 slab_free_freelist_hook mm/slub.c:1477 [inline]
 slab_free mm/slub.c:3034 [inline]
 kfree+0xf7/0x410 mm/slub.c:3995
 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
 vfs_unlink+0x287/0x570 fs/namei.c:4073
 do_unlinkat+0x4f9/0x620 fs/namei.c:4137
 __do_sys_unlink fs/namei.c:4184 [inline]
 __se_sys_unlink fs/namei.c:4182 [inline]
 __x64_sys_unlink+0x42/0x50 fs/namei.c:4182
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880683b0000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
 1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_printer.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 9c7ed2539ff77..8ed1295d7e350 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/ctype.h>
 #include <linux/cdev.h>
+#include <linux/kref.h>
 
 #include <asm/byteorder.h>
 #include <linux/io.h>
@@ -64,7 +65,7 @@ struct printer_dev {
 	struct usb_gadget	*gadget;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
-
+	struct kref             kref;
 	struct list_head	rx_reqs;	/* List of free RX structs */
 	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
 	struct list_head	rx_buffers;	/* List of completed xfers */
@@ -218,6 +219,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 
 /*-------------------------------------------------------------------------*/
 
+static void printer_dev_free(struct kref *kref)
+{
+	struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+	kfree(dev);
+}
+
 static struct usb_request *
 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 {
@@ -348,6 +356,7 @@ printer_open(struct inode *inode, struct file *fd)
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_get(&dev->kref);
 	DBG(dev, "printer_open returned %x\n", ret);
 	return ret;
 }
@@ -365,6 +374,7 @@ printer_close(struct inode *inode, struct file *fd)
 	dev->printer_status &= ~PRINTER_SELECTED;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_put(&dev->kref, printer_dev_free);
 	DBG(dev, "printer_close\n");
 
 	return 0;
@@ -1350,7 +1360,8 @@ static void gprinter_free(struct usb_function *f)
 	struct f_printer_opts *opts;
 
 	opts = container_of(f->fi, struct f_printer_opts, func_inst);
-	kfree(dev);
+
+	kref_put(&dev->kref, printer_dev_free);
 	mutex_lock(&opts->lock);
 	--opts->refcnt;
 	mutex_unlock(&opts->lock);
@@ -1419,6 +1430,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
 		return ERR_PTR(-ENOMEM);
 	}
 
+	kref_init(&dev->kref);
 	++opts->refcnt;
 	dev->minor = opts->minor;
 	dev->pnp_string = opts->pnp_string;
-- 
2.25.1

[PATCH AUTOSEL 5.8 052/101] USB: cdc-acm: handle broken union descriptors

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ]

Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.

Note that this still allows for handling union descriptors with switched
interfaces.

This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.

Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Tested-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/class/cdc-acm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7499ba118665a..c02488d469185 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1243,9 +1243,21 @@ static int acm_probe(struct usb_interface *intf,
 			}
 		}
 	} else {
+		int class = -1;
+
 		data_intf_num = union_header->bSlaveInterface0;
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+		if (control_interface)
+			class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+		if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		}
 	}
 
 	if (!control_interface || !data_interface) {
-- 
2.25.1

[PATCH AUTOSEL 5.8 053/101] usb: dwc3: simple: add support for Hikey 970

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit b68d9251561f33661e53dd618f1cafe7ec9ec3c2 ]

This binding driver is needed for Hikey 970 to work,
as otherwise a Serror is produced:

    [    1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError
    [    1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
    [    1.837463] Hardware name: HiKey970 (DT)
    [    1.837465] Workqueue: events deferred_probe_work_func
    [    1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
    [    1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50
    [    1.837469] lr : regmap_unlock_spinlock+0x14/0x20
    [    1.837470] sp : ffff8000124dba60
    [    1.837471] x29: ffff8000124dba60 x28: 0000000000000000
    [    1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18
    [    1.837476] x25: 0000000000000005 x24: ffff800011f918f8
    [    1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00
    [    1.837481] x21: 0000000000000100 x20: 0000000000000000
    [    1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000
    [    1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950
    [    1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff
    [    1.837490] x13: 0000000000000030 x12: 0101010101010101
    [    1.837493] x11: 0000000000000020 x10: ffff0001bf17d130
    [    1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080
    [    1.837497] x7 : 0000000000000000 x6 : 000000000000003f
    [    1.837500] x5 : 0000000000000000 x4 : 0000000000000000
    [    1.837502] x3 : ffff80001096a880 x2 : 0000000000000000
    [    1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001
    [    1.837507] Kernel panic - not syncing: Asynchronous SError Interrupt
    [    1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
    [    1.837510] Hardware name: HiKey970 (DT)
    [    1.837511] Workqueue: events deferred_probe_work_func
    [    1.837513] Call trace:
    [    1.837514]  dump_backtrace+0x0/0x1e0
    [    1.837515]  show_stack+0x18/0x24
    [    1.837516]  dump_stack+0xc0/0x11c
    [    1.837517]  panic+0x15c/0x324
    [    1.837518]  nmi_panic+0x8c/0x90
    [    1.837519]  arm64_serror_panic+0x78/0x84
    [    1.837520]  do_serror+0x158/0x15c
    [    1.837521]  el1_error+0x84/0x100
    [    1.837522]  _raw_spin_unlock_irqrestore+0x18/0x50
    [    1.837523]  regmap_write+0x58/0x80
    [    1.837524]  hi3660_reset_deassert+0x28/0x34
    [    1.837526]  reset_control_deassert+0x50/0x260
    [    1.837527]  reset_control_deassert+0xf4/0x260
    [    1.837528]  dwc3_probe+0x5dc/0xe6c
    [    1.837529]  platform_drv_probe+0x54/0xb0
    [    1.837530]  really_probe+0xe0/0x490
    [    1.837531]  driver_probe_device+0xf4/0x160
    [    1.837532]  __device_attach_driver+0x8c/0x114
    [    1.837533]  bus_for_each_drv+0x78/0xcc
    [    1.837534]  __device_attach+0x108/0x1a0
    [    1.837535]  device_initial_probe+0x14/0x20
    [    1.837537]  bus_probe_device+0x98/0xa0
    [    1.837538]  deferred_probe_work_func+0x88/0xe0
    [    1.837539]  process_one_work+0x1cc/0x350
    [    1.837540]  worker_thread+0x2c0/0x470
    [    1.837541]  kthread+0x154/0x160
    [    1.837542]  ret_from_fork+0x10/0x30
    [    1.837569] SMP: stopping secondary CPUs
    [    1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000
    [    1.837571] PHYS_OFFSET: 0x0
    [    1.837572] CPU features: 0x240002,20882004
    [    1.837573] Memory Limit: none

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-of-simple.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 8852fbfdead4e..336253ff55749 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -176,6 +176,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "cavium,octeon-7130-usb-uctl" },
 	{ .compatible = "sprd,sc9860-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "hisilicon,hi3670-dwc3" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-- 
2.25.1

[PATCH AUTOSEL 5.8 066/101] usb: ohci: Default to per-port over-current protection

[Sasha Levin]

From: Hamish Martin <hamish.martin@alliedtelesis.co.nz>

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub
to pins on the SoC. In some cases the unconnected ports generate
spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC
contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current
protection mode (AKA "ganged"). This leads to the spurious over-current
events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending
on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up
  for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching
  remains at none, while over-current protection is now guaranteed to be
  set to per-port rather than the previous behaviour where it was either
  none or global over-current protection depending on the value at
  function entry.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ohci-hcd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4de91653a2c7b..5eb62240c7f87 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -673,20 +673,24 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	/* handle root hub init quirks ... */
 	val = roothub_a (ohci);
-	val &= ~(RH_A_PSM | RH_A_OCPM);
+	/* Configure for per-port over-current protection by default */
+	val &= ~RH_A_NOCP;
+	val |= RH_A_OCPM;
 	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
-		/* NSC 87560 and maybe others */
+		/* NSC 87560 and maybe others.
+		 * Ganged power switching, no over-current protection.
+		 */
 		val |= RH_A_NOCP;
-		val &= ~(RH_A_POTPGT | RH_A_NPS);
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+		val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
 	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
-		 * Mac platforms.  ganged overcurrent reporting, if any.
+		 * Mac platforms.
 		 */
 		val |= RH_A_NPS;
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	}
+	ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
 	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 						&ohci->regs->roothub.b);
-- 
2.25.1

[PATCH AUTOSEL 5.8 096/101] usb: core: Solve race condition in anchor cleanup functions

[Sasha Levin]

From: Eli Billauer <eli.billauer@gmail.com>

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]

usb_kill_anchored_urbs() is commonly used to cancel all URBs on an
anchor just before releasing resources which the URBs rely on. By doing
so, users of this function rely on that no completer callbacks will take
place from any URB on the anchor after it returns.

However if this function is called in parallel with __usb_hcd_giveback_urb
processing a URB on the anchor, the latter may call the completer
callback after usb_kill_anchored_urbs() returns. This can lead to a
kernel panic due to use after release of memory in interrupt context.

The race condition is that __usb_hcd_giveback_urb() first unanchors the URB
and then makes the completer callback. Such URB is hence invisible to
usb_kill_anchored_urbs(), allowing it to return before the completer has
been called, since the anchor's urb_list is empty.

Even worse, if the racing completer callback resubmits the URB, it may
remain in the system long after usb_kill_anchored_urbs() returns.

Hence list_empty(&anchor->urb_list), which is used in the existing
while-loop, doesn't reliably ensure that all URBs of the anchor are gone.

A similar problem exists with usb_poison_anchored_urbs() and
usb_scuttle_anchored_urbs().

This patch adds an external do-while loop, which ensures that all URBs
are indeed handled before these three functions return. This change has
no effect at all unless the race condition occurs, in which case the
loop will busy-wait until the racing completer callback has finished.
This is a rare condition, so the CPU waste of this spinning is
negligible.

The additional do-while loop relies on usb_anchor_check_wakeup(), which
returns true iff the anchor list is empty, and there is no
__usb_hcd_giveback_urb() in the system that is in the middle of the
unanchor-before-complete phase. The @suspend_wakeups member of
struct usb_anchor is used for this purpose, which was introduced to solve
another problem which the same race condition causes, in commit
6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up
till completion is done").

The surely_empty variable is necessary, because usb_anchor_check_wakeup()
must be called with the lock held to prevent races. However the spinlock
must be released and reacquired if the outer loop spins with an empty
URB list while waiting for the unanchor-before-complete passage to finish:
The completer callback may very well attempt to take the very same lock.

To summarize, using usb_anchor_check_wakeup() means that the patched
functions can return only when the anchor's list is empty, and there is
no invisible URB being processed. Since the inner while loop finishes on
the empty list condition, the new do-while loop will terminate as well,
except for when the said race condition occurs.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/urb.c | 89 +++++++++++++++++++++++++-----------------
 1 file changed, 54 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index da923ec176122..31ca5abb4c12a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -772,11 +772,12 @@ void usb_block_urb(struct urb *urb)
 EXPORT_SYMBOL_GPL(usb_block_urb);
 
 /**
- * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
  * @anchor: anchor the requests are bound to
  *
- * this allows all outstanding URBs to be killed starting
- * from the back of the queue
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
  *
  * This routine should not be called by a driver after its disconnect
  * method has returned.
@@ -784,20 +785,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb);
 void usb_kill_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_kill_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_kill_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 
@@ -816,21 +823,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_poison_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	anchor->poisoned = 1;
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_poison_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		anchor->poisoned = 1;
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_poison_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
 
@@ -970,14 +983,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
 	unsigned long flags;
+	int surely_empty;
+
+	do {
+		spin_lock_irqsave(&anchor->lock, flags);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			__usb_unanchor_urb(victim, anchor);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
 
-	spin_lock_irqsave(&anchor->lock, flags);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		__usb_unanchor_urb(victim, anchor);
-	}
-	spin_unlock_irqrestore(&anchor->lock, flags);
+		spin_unlock_irqrestore(&anchor->lock, flags);
+		cpu_relax();
+	} while (!surely_empty);
 }
 
 EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
-- 
2.25.1