* [PATCH v1] usb: dwc3: Simplify with dev_err_probe()
@ 2020-10-20 8:38 Andy Shevchenko
2020-11-25 16:24 ` Andy Shevchenko
0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2020-10-20 8:38 UTC (permalink / raw)
To: Felipe Balbi, linux-usb, Greg Kroah-Hartman; +Cc: Andy Shevchenko
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/usb/dwc3/core.c | 44 +++++++++++------------------------------
1 file changed, 11 insertions(+), 33 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index bdf0925da6b6..8787dff5342e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1126,11 +1126,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
ret = PTR_ERR(dwc->usb2_phy);
if (ret == -ENXIO || ret == -ENODEV) {
dwc->usb2_phy = NULL;
- } else if (ret == -EPROBE_DEFER) {
- return ret;
} else {
- dev_err(dev, "no usb2 phy configured\n");
- return ret;
+ return dev_err_probe(dev, ret, "no usb2 phy configured\n");
}
}
@@ -1138,11 +1135,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
ret = PTR_ERR(dwc->usb3_phy);
if (ret == -ENXIO || ret == -ENODEV) {
dwc->usb3_phy = NULL;
- } else if (ret == -EPROBE_DEFER) {
- return ret;
} else {
- dev_err(dev, "no usb3 phy configured\n");
- return ret;
+ return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
}
@@ -1151,11 +1145,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
ret = PTR_ERR(dwc->usb2_generic_phy);
if (ret == -ENOSYS || ret == -ENODEV) {
dwc->usb2_generic_phy = NULL;
- } else if (ret == -EPROBE_DEFER) {
- return ret;
} else {
- dev_err(dev, "no usb2 phy configured\n");
- return ret;
+ return dev_err_probe(dev, ret, "no usb2 phy configured\n");
}
}
@@ -1164,11 +1155,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
ret = PTR_ERR(dwc->usb3_generic_phy);
if (ret == -ENOSYS || ret == -ENODEV) {
dwc->usb3_generic_phy = NULL;
- } else if (ret == -EPROBE_DEFER) {
- return ret;
} else {
- dev_err(dev, "no usb3 phy configured\n");
- return ret;
+ return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
}
@@ -1190,11 +1178,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to initialize gadget\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to initialize gadget\n");
break;
case USB_DR_MODE_HOST:
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
@@ -1205,20 +1190,14 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
ret = dwc3_host_init(dwc);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to initialize host\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to initialize host\n");
break;
case USB_DR_MODE_OTG:
INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
ret = dwc3_drd_init(dwc);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to initialize dual-role\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to initialize dual-role\n");
break;
default:
dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
@@ -1555,8 +1534,7 @@ static int dwc3_probe(struct platform_device *pdev)
ret = dwc3_core_init(dwc);
if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to initialize core: %d\n", ret);
+ dev_err_probe(dev, ret, "failed to initialize core\n");
goto err4;
}
--
2.28.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1] usb: dwc3: Simplify with dev_err_probe()
2020-10-20 8:38 [PATCH v1] usb: dwc3: Simplify with dev_err_probe() Andy Shevchenko
@ 2020-11-25 16:24 ` Andy Shevchenko
0 siblings, 0 replies; 2+ messages in thread
From: Andy Shevchenko @ 2020-11-25 16:24 UTC (permalink / raw)
To: Felipe Balbi, linux-usb, Greg Kroah-Hartman
On Tue, Oct 20, 2020 at 11:38:15AM +0300, Andy Shevchenko wrote:
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe(). Less code and the error value gets printed.
Felipe, any comments?
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/usb/dwc3/core.c | 44 +++++++++++------------------------------
> 1 file changed, 11 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index bdf0925da6b6..8787dff5342e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1126,11 +1126,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> ret = PTR_ERR(dwc->usb2_phy);
> if (ret == -ENXIO || ret == -ENODEV) {
> dwc->usb2_phy = NULL;
> - } else if (ret == -EPROBE_DEFER) {
> - return ret;
> } else {
> - dev_err(dev, "no usb2 phy configured\n");
> - return ret;
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> }
> }
>
> @@ -1138,11 +1135,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> ret = PTR_ERR(dwc->usb3_phy);
> if (ret == -ENXIO || ret == -ENODEV) {
> dwc->usb3_phy = NULL;
> - } else if (ret == -EPROBE_DEFER) {
> - return ret;
> } else {
> - dev_err(dev, "no usb3 phy configured\n");
> - return ret;
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> }
> }
>
> @@ -1151,11 +1145,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> ret = PTR_ERR(dwc->usb2_generic_phy);
> if (ret == -ENOSYS || ret == -ENODEV) {
> dwc->usb2_generic_phy = NULL;
> - } else if (ret == -EPROBE_DEFER) {
> - return ret;
> } else {
> - dev_err(dev, "no usb2 phy configured\n");
> - return ret;
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> }
> }
>
> @@ -1164,11 +1155,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> ret = PTR_ERR(dwc->usb3_generic_phy);
> if (ret == -ENOSYS || ret == -ENODEV) {
> dwc->usb3_generic_phy = NULL;
> - } else if (ret == -EPROBE_DEFER) {
> - return ret;
> } else {
> - dev_err(dev, "no usb3 phy configured\n");
> - return ret;
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> }
> }
>
> @@ -1190,11 +1178,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>
> ret = dwc3_gadget_init(dwc);
> - if (ret) {
> - if (ret != -EPROBE_DEFER)
> - dev_err(dev, "failed to initialize gadget\n");
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to initialize gadget\n");
> break;
> case USB_DR_MODE_HOST:
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> @@ -1205,20 +1190,14 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>
> ret = dwc3_host_init(dwc);
> - if (ret) {
> - if (ret != -EPROBE_DEFER)
> - dev_err(dev, "failed to initialize host\n");
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to initialize host\n");
> break;
> case USB_DR_MODE_OTG:
> INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
> ret = dwc3_drd_init(dwc);
> - if (ret) {
> - if (ret != -EPROBE_DEFER)
> - dev_err(dev, "failed to initialize dual-role\n");
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to initialize dual-role\n");
> break;
> default:
> dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
> @@ -1555,8 +1534,7 @@ static int dwc3_probe(struct platform_device *pdev)
>
> ret = dwc3_core_init(dwc);
> if (ret) {
> - if (ret != -EPROBE_DEFER)
> - dev_err(dev, "failed to initialize core: %d\n", ret);
> + dev_err_probe(dev, ret, "failed to initialize core\n");
> goto err4;
> }
>
> --
> 2.28.0
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-11-25 16:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-20 8:38 [PATCH v1] usb: dwc3: Simplify with dev_err_probe() Andy Shevchenko
2020-11-25 16:24 ` Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).