[PATCH AUTOSEL 4.14 01/14] usb: gadget: goku_udc: fix potential crashes in probe

[PATCH AUTOSEL 4.14 01/14] usb: gadget: goku_udc: fix potential crashes in probe

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 0d66e04875c5aae876cf3d4f4be7978fa2b00523 ]

goku_probe() goes to error label "err" and invokes goku_remove()
in case of failures of pci_enable_device(), pci_resource_start()
and ioremap(). goku_remove() gets a device from
pci_get_drvdata(pdev) and works with it without any checks, in
particular it dereferences a corresponding pointer. But
goku_probe() did not set this device yet. So, one can expect
various crashes. The patch moves setting the device just after
allocation of memory for it.

Found by Linux Driver Verification project (linuxtesting.org).

Reported-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/goku_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 8433c22900dcb..0ed0d03651329 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1772,6 +1772,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err;
 	}
 
+	pci_set_drvdata(pdev, dev);
 	spin_lock_init(&dev->lock);
 	dev->pdev = pdev;
 	dev->gadget.ops = &goku_ops;
@@ -1805,7 +1806,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	dev->regs = (struct goku_udc_regs __iomem *) base;
 
-	pci_set_drvdata(pdev, dev);
 	INFO(dev, "%s\n", driver_desc);
 	INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
 	INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
-- 
2.27.0

[PATCH AUTOSEL 4.14 12/14] net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit 5fd8477ed8ca77e64b93d44a6dae4aa70c191396 ]

Add support for Telit LE910Cx 0x1230 composition:

0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 2f79a5f1552d4..0e8177f0cc883 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1257,6 +1257,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)},	/* Telit LE920, LE920A4 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1230, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
-- 
2.27.0